Test apparatus for locating shorts during assembly of electrical buses

A test apparatus is described for locating electrical shorts that is especially suited for use while an electrical circuit is being fabricated or assembled. A ring counter derives input pulses from a square wave oscillator. The outputs of the counter are fed through transistors to an array of light emitting diodes. Each diode is connected to an electrical conductor, such as a bus bar, that is to be tested. In the absence of a short between the electrical conductors the diodes are sequentially illuminated. When a short occurs, a comparator/multivibrator circuit triggers an alarm and stops the oscillator and the sequential energization of the diodes. The two diodes that remain illuminated identify the electrical conductors that are shorted

Cavitation-induced ignition of cryogenic hydrogen-oxygen fluids

The Challenger disaster and purposeful experiments with liquid hydrogen (H2) and oxygen (Ox) tanks demonstrated that cryogenic H2/Ox fluids always self-ignite in the process of their mixing. Here we propose a cavitation-induced self-ignition mechanism that may be realized under these conditions. In one possible scenario, self-ignition is caused by the strong shock waves generated by the collapse of pure Ox vapor bubble near the surface of the Ox liquid that may initiate detonation of the gaseous H2/Ox mixture adjacent to the gas-liquid interface. This effect is further enhanced by H2/Ox combustion inside the collapsing bubble in the presence of admixed H2 gas

Research notes: Aluminum tolerance in soybean germplasm

Aluminum in the soil solution is a severe growth limiting factor in certain acid soils (Foy, 1964; Long and Foy, 1970). This problem is particularly serious in acid subsoils (Adams and Lund, 1966; Foy, 1964) which are difficult to lime. Recent research has centered on selecting those plant cultivars which demonstrate a degree of tolerance to soil aluminum

Modeling of the magnetomechanical effect: Application of the Rayleigh law to the stress domain

Stress is one of the principal external factors affecting the magnetization of materials. The magnetomechanical effect, that is, the change of magnetization of a magnetic material resulting from the application of stress, has attracted attention because of its scientific complexity. An improved model equation for interpreting the magnetomechanical effect has been developed based on extension of the previous equation to include the Rayleigh law. According to the previous theory of the magnetomechanical effect, which is based on the “law of approach,” application of stress induces changes in magnetization toward anhysteretic magnetization which itself is stress dependent, and the rate of change of magnetization with the input elastic energy is dependent on the displacement of the prevailing magnetization from the anhysteretic magnetization. The theory has been refined by including a linear term in the model equation in addition to the well-known quadratic term. It was found that the modified theory provides a much better description of the magnetization changes under stress, particularly at small applied stress amplitudes and when the stress changes sign

MRI and Neuropsychological Correlates of Carbon Monoxide Exposure: A Case Report

A 45-year-old woman experienced long-term, chronic exposure to carbon monoxide in the restaurant kitchen where she was employed as a cook. After returning to the restaurant after 5 days off work, she noticed that her symptoms returned immediately; she then aired out the room and called the gas company. Approximately 6 hr after a leak was detected, the patient went to the hospital, where her carboxyhemoglobin was found to be within normal limits and results of a neurologic examination were described as normal. Based on her symptoms, the patient believed she had been exposed to CO for at least 1 year before the leak was discovered. Initially, she experienced flu-like symptoms, which eventually resolved. At the time of her first neuropsychological evaluation (17 months after the exposure was identified), her persisting complaints included difficulties in reading, writing, speaking and word retrieval. The test results were consistent with secondary frontal lobe dysfunction associated with subcortical disorders such as those seen after CO exposure. Results of a subsequent neuropsychological examination (29 months postexposure) showed slight improvement in performance, but her performance was still consistent with mild frontal/subcortical dysfunction. Although the initial screening of a brain magnetic resonance image (MRI) performed 15 months after the exposure was interpreted as being within normal limits, two subsequent blind reviews of the same scans identified multiple bilateral lesions in the basal ganglia, which were consistent with chronic CO exposure. We present this case as an example of the utility of MRI and neuropsychological examinations in detecting central nervous system dysfunction secondary to CO exposure

Biodegradation and antimicrobial properties of zinc oxide–polymer composite materials for urinary stent applications

Research advancements in the field of urinary stents have mainly been in the selection of materials and coatings to address commonly faced problems of encrustation and bacterial adhesion. In this study, polylactic acid (PLA) and polypropylene (PP) were evaluated with zinc oxide (ZnO) coating to assess its ability to reduce or eliminate the problems of encrustation and bacteria adhesion. PLA and PP films were prepared via twin screw extrusion. ZnO microparticles were prepared using sol-gel hydrothermal synthesis. The as-prepared ZnO microparticles were combined in the form of a functional coating and deposited on both polymer substrates using a doctor blade technique. The ZnO-coated PP and PLA samples as well as their uncoated counterparts were characterized from the physicochemical standpoints, antibacterial and biodegradation properties. The results demonstrated that both the polymers preserved their mechanical and thermal properties after coating with ZnO, which showed a better adhesion on PLA than on PP. Moreover, the ZnO coating successfully enhanced the antibacterial properties with respect to bare PP/PLA substrates. All the samples were investigated after immersion in simulated body fluid and artificial urine. The ZnO layer was completely degraded following 21 days immersion in artificial urine irrespective of the substrate, with encrustations more evident in PP and ZnO-coated PP films than PLA and ZnO-coated PLA films. Overall, the addition of ZnO coating on PLA displayed better adhesion, antibacterial activity and delayed the deposition of encrustations in comparison to PP substrates

Detection of OH absorption against PSR B1849+00

We have searched for OH absorption against seven pulsars using the Arecibo telescope. In both OH mainlines (at 1665 and 1667 MHz), deep and narrow absorption features were detected toward PSR B1849+00. In addition, we have detected several absorption and emission features against B33.6+0.1, a nearby supernova remnant (SNR). The most interesting result of this study is that a pencil-sharp absorption sample against the PSR differs greatly from the large-angle absorption sample observed against the SNR. If both the PSR and the SNR probe the same molecular cloud then this finding has important implications for absorption studies of the molecular medium, as it shows that the statistics of absorbing OH depends on the size of the background source. We also show that the OH absorption against the PSR most likely originates from a small (<30 arcsec) and dense (>10^5 cm^-3) molecular clump.Comment: 12 pages, 8 figures. Accepted for publication in Ap

Relativistic three-body bound states and the reduction from four to three dimensions

Beginning with an effective field theory based upon meson exchange, the Bethe-Salpeter equation for the three-particle propagator (six-point function) is obtained. Using the one-boson-exchange form of the kernel, this equation is then analyzed using time-ordered perturbation theory, and a three-dimensional equation for the propagator is developed. The propagator consists of a pre-factor in which the relative energies are fixed by the initial state of the particles, an intermediate part in which only global propagation of the particles occurs, and a post-factor in which relative energies are fixed by the final state of the particles. The pre- and post-factors are necessary in order to account for the transition from states where particles are off their mass shell to states described by the global propagator with all of the particle energies on shell. The pole structure of the intermediate part of the propagator is used to determine the equation for the three-body bound state: a Schr{\"o}dinger-like relativistic equation with a single, global Green's function. The role of the pre- and post-factors in the relativistic dynamics is to incorporate the poles of the breakup channels in the initial and final states. The derivation of this equation by integrating over the relative times rather than via a constraint on relative momenta allows the inclusion of retardation and dynamical boost corrections without introducing unphysical singularities.Comment: REVTeX, 21 pages, 4 figures, epsf.st

Electron-deuteron scattering in a current-conserving description of relativistic bound states: formalism and impulse approximation calculations

The electromagnetic interactions of a relativistic two-body bound state are formulated in three dimensions using an equal-time (ET) formalism. This involves a systematic reduction of four-dimensional dynamics to a three-dimensional form by integrating out the time components of relative momenta. A conserved electromagnetic current is developed for the ET formalism. It is shown that consistent truncations of the electromagnetic current and the $NN$ interaction kernel may be made, order-by-order in the coupling constants, such that appropriate Ward-Takahashi identities are satisfied. A meson-exchange model of the $NN$ interaction is used to calculate deuteron vertex functions. Calculations of electromagnetic form factors for elastic scattering of electrons by deuterium are performed using an impulse-approximation current. Negative-energy components of the deuteron's vertex function and retardation effects in the meson-exchange interaction are found to have only minor effects on the deuteron form factors.Comment: 42 pages, RevTe

Australian consumers are willing to pay for the health star rating front-of-pack nutrition label

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. The Australia and New Zealand Ministerial Forum on Food Regulation has supported the recommendations set out in the 2019 Health Star Rating System Five Year Review Report. Specifically, the forum supported, in principle, Recommendation 9, to mandate the Health Star Rating if clear uptake targets were not achieved while the system is voluntary. Given that mandatory labelling is being considered, it is important to investigate how much consumers value the Health Star Rating in order to understand potential consumer uptake and inform industry. The aim of this study was to assess consumers’ valuation of the Health Star Rating system by analysing their willingness to pay for a packaged food product with the Health Star Rating label, utilising a double-bounded dichotomous choice contingent valuation approach. The results indicate that almost two-thirds of Australian household grocery shoppers were willing to pay more for a product with the Health Star Rating, on average up to an additional 3.7% of the price of the product. However, public health nutrition benefits associated with consumers’ willingness to pay more for products with the Health Star Rating is currently limited by the lack of guarantee of the systems’ accuracy. Given consumer support, a well validated and comprehensive Health Star Rating labelling system can potentially improve health outcomes, cost effectiveness and reduce environmental impacts