86 research outputs found
Induced Ankylosis of a Primary Molar for Skeletal Anchorage in the Mandible as Alternative to Mini-Implants
Background Mesial protraction of mandibular posterior teeth requires increased anchorage to avoid undesired tooth movements. Orthodontic mini-implants have become a popular and successful way to increase skeletal anchorage in such cases. However, mini-implants may cause injury to adjacent teeth or anatomical structures and may lead to tissue inflammation. Induced ankylosed primary teeth have been used in the past as abutments for the protraction of the maxilla in cases of maxillary retrognathism. However, this technique has not been described in the literature for the protraction of mandibular molars. The aim of this paper is to present, through a case report, an alternative to mini-implant devices to maximize anchorage in the mandible by inducing ankylosis on a primary molar. Findings A 13-year-old female with class II right malocclusion, deep bite, and congenitally missing right second premolars was referred for orthodontic treatment. Treatment plan involved removal of the primary teeth and mesial protraction of the posterior. In the mandible, ankylosis was induced on the retained primary second molar by extraction, bisection, replantation of the mesial part after endodontic treatment, and bonding of a rigid splint. Ankylosis was diagnosed after 10 weeks and a closing T-loop sectional wire was inserted to move the permanent first molar mesially. At 6 months, the remaining space was closed using elastic chain on a rectangular stainless steel wire with tip-back bends, supported by class II elastics. Conclusions Induced ankylosis of primary teeth can be an alternative to orthodontic mini-implants in selected cases, with minimal risks and maximum biocompatibility
A novel method for pair-matching using three-dimensional digital models of bone:mesh-to-mesh value comparison
The commingling of human remains often hinders forensic/physical anthropologists during the identification process, as there are limited methods to accurately sort these remains. This study investigates a new method for pair-matching, a common individualization technique, which uses digital three-dimensional models of bone: mesh-to-mesh value comparison (MVC). The MVC method digitally compares the entire three-dimensional geometry of two bones at once to produce a single value to indicate their similarity. Two different versions of this method, one manual and the other automated, were created and then tested for how well they accurately pair-matched humeri. Each version was assessed using sensitivity and specificity. The manual mesh-to-mesh value comparison method was 100 % sensitive and 100 % specific. The automated mesh-to-mesh value comparison method was 95 % sensitive and 60 % specific. Our results indicate that the mesh-to-mesh value comparison method overall is a powerful new tool for accurately pair-matching commingled skeletal elements, although the automated version still needs improvement. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s00414-016-1334-3) contains supplementary material, which is available to authorized users
Covariance patterns between ramus morphology and the rest of the face: A geometric morphometric study
OBJECTIVE
The growth and development of the mandible strongly depend on modeling changes occurring at its ramus. Here, we investigated covariance patterns between the morphology of the ramus and the rest of the face.
METHODS
Lateral cephalograms of 159 adults (55 males and 104 females) with no history of orthodontic treatment were collected. Geometric morphometrics with sliding semi-landmarks was used. The covariance between the ramus and face was investigated using a two-block partial least squares analysis (PLS). Sexual dimorphism and allometry were also assessed.
RESULTS
Differences in the divergence of the face and anteroposterior relationship of the jaws accounted for 24.1% and 21.6% of shape variation in the sample, respectively. Shape variation was greater in the sagittal plane for males than for females (30.7% vs. 17.4%), whereas variation in the vertical plane was similar for both sexes (23.7% for males and 25.4% for females). Size-related allometric differences between the sexes accounted for the shape variation to a maximum of 6% regarding the face. Regarding the covariation between the shapes of the ramus and the rest of the face, wider and shorter rami were associated with a decreased lower anterior facial height as well as a prognathic mandible and maxilla (PLS 1, 45.5% of the covariance). Additionally, a more posteriorly inclined ramus in the lower region was correlated with a Class II pattern and flat mandibular plane.
CONCLUSIONS
The width, height, and inclination of the ramus were correlated with facial shape changes in the vertical and sagittal planes
Facial asymmetry and midsagittal plane definition in 3D: A bias-free, automated method.
Symmetry is a fundamental biological concept in all living organisms. It is related to a variety of physical and social traits ranging from genetic background integrity and developmental stability to the perception of physical appearance. Within this context, the study of human facial asymmetry carries a unique significance. Here, we validated an efficient method to assess 3D facial surface symmetry by best-fit approximating the original surface to its mirrored one. Following this step, the midsagittal plane of the face was automatically defined at the midpoints of the contralateral corresponding vertices of the superimposed models and colour coded distance maps were constructed. The method was tested by two operators using facial models of different surface size. The results show that the midsagittal plane definition was highly reproducible (maximum error < 0.1 mm or°) and remained robust for different extents of the facial surface model. The symmetry assessments were valid (differences between corresponding bilateral measurement areas < 0.1 mm), highly reproducible (error < 0.01 mm), and were modified by the extent of the initial surface model. The present landmark-free, automated method to assess facial asymmetry and define the midsagittal plane of the face is accurate, objective, easily applicable, comprehensible and cost effective
Smile Reproducibility and Its Relationship to Self-Perceived Smile Attractiveness.
The reproducibility of facial expressions has been previously explored, however, there is no detailed information regarding the reproducibility of lip morphology forming a social smile. In this study, we recruited 93 young adults, aged 21-35 years old, who agreed to participate in two consecutive study visits four weeks apart. On each visit, they were asked to perform a social smile, which was captured on a 3D facial image acquired using the 3dMD camera system. Assessments of self-perceived smile attractiveness were also performed using a VAS scale. Lip morphology, including smile shape, was described using 62 landmarks and semi-landmarks. A Procrustes superimposition of each set of smiling configurations (first and second visit) was performed and the Euclidean distance between each landmark set was calculated. A linear regression model was used to test the association between smile consistency and self-perceived smile attractiveness. The results show that the average landmark distance between sessions did not exceed 1.5 mm, indicating high repeatability, and that females presented approximately 15% higher smile consistecy than males (p < 0.05). There was no statistically significant association between smile consistency and self-perceived smile attractiveness (η2 = 0.015; p = 0.252), when controlling for the effect of sex and age
3D Method for Occlusal Tooth Wear Assessment in Presence of Substantial Changes on Other Tooth Surfaces
Early diagnosis and timely management of tooth or dental material wear is imperative to avoid extensive restorations. Previous studies suggested different methods for tooth wear assessment, but no study has developed a three‐dimensional (3D) superimposition technique applicable in cases where tooth surfaces, other than the occlusal, undergo extensive morphological
changes. Here, we manually grinded plaster incisors and canines to simulate occlusal tooth wear of varying severity in teeth that received a wire retainer bonded on their lingual surfaces, during the assessment period. The corresponding dental casts were scanned using a surface scanner. The
modified tooth crowns were best‐fit approximated to the original crowns using seven 3D superimposition techniques (two reference areas with varying settings) and the gold standard technique (GS: intact adjacent teeth and alveolar processes as superimposition reference), which provided the true value. Only a specific technique (complete crown with 20% estimated overlap of
meshes), which is applicable in actual clinical data, showed perfect agreement with the GS technique in all cases (median difference: −0.002, max absolute difference: 0.178 mm3). The outcomes of the suggested and the GS technique were highly reproducible (max difference < 0.040 mm3). The presented technique offers low cost, convenient, accurate, and risk‐free tooth wear assessment
Third Molar Agenesis Is Associated with Facial Size.
Individuals with congenitally missing permanent teeth, other than third molars, present smaller craniofacial configurations compared to normal controls. However, it is not known if agenesis of third molars is part of the same mechanism. Therefore, this study assessed individuals with and without isolated third molar agenesis and tested the relation of this condition to the size of their facial configurations, using geometric morphometric methods. We show that the absence of one or more third molars is associated with a smaller maxilla, smaller mandible and a smaller overall facial configuration. The effect was larger as the number of missing third molars increased. For example, the size of the mandibular centroids in five 16-year-old females with no, one, two, three or four missing third molars showed a size reduction of approximately 2.5 mm per missing third molar. In addition, in cases with third molar agenesis in one jaw only, the effect was also evident on the opposite jaw. Our findings suggest that isolated third molar agenesis is part of a developmental mechanism resulting also in craniofacial size reduction. This might be the effect of an evolutionary process observed in humans, leading to fewer and smaller teeth, as well as smaller facial structures
Applications of 3D printing on craniofacial bone repair: A systematic review
Objectives
Three-dimensional (3D) bioprinting, a method derived from additive manufacturing technology, is a recent and ongoing trend for the construction of 3D volumetric structures. The purpose of this systematic review is to summarize evidence from existing human and animal studies assessing the application of 3D printing on bone repair and regeneration in the craniofacial region. Data & sources
A rigorous search of all relevant clinical trials and case series was performed, based on specific inclusion and exclusion criteria. The search was conducted in all available electronic databases and sources, supplemented by a manual search, in December 2017. Study selection
43 articles (6 human and 37 animal studies) fulfilled the criteria. The human studies included totally 81 patients with craniofacial bone defects. Titanium or hydroxylapatite scaffolds were most commonly implanted. The follow-up period ranged between 6 and 24 months. Bone repair was reported successful in nearly every case, with minimal complications. Also, animal intervention studies used biomaterials and cells in various combination, offering insights into the techniques, through histological, biochemical, histomorphometric and microcomputed tomographic findings. The results in both humans and animals, though promising, are yet to be verified for clinical impact. Conclusions
Future research should be focused on well-designed clinical trials to confirm the short- and long- term efficacy of 3D printing strategies for craniofacial bone repair. Clinical significance
Emerging 3D printing technology opens a new era for tissue engineering. Humans and animals on application of 3D printing for craniofacial bone repair showed promising results which will lead clinicians to investigate more thoroughly alternative therapeutic methods for craniofacial bone defects
Anterior teeth root inclination prediction derived from digital models : a comparative study of plaster study casts and CBCT images
To assess the accuracy of digital models generated using commercially available software to predict anterior teeth root inclination characteristics and compare the results to relevant data obtained from CBCT images. Following sample size calculation and after application of inclusion and exclusion criteria, pre-treatment maxillary and mandibular plaster models and the corresponding CBCT scans of 31 patients attending a private orthodontic clinic were selected. The subjects were 10 males and 21 females with age range 12 to 40 years. Plaster models were scanned using the high resolution mode of an Ortho Insight 3D scanner and CBCT scans were taken using a Kodak 9500 Cone Beam 3D System machine. The teeth on the digital scans were segmented and virtual roots were predicted and constructed by the Ortho Insight 3D software. The long axes of the predicted roots and the actual roots, as segmented from the CBCT images, were computed using best-fit lines. The inter-axis angle was used to assess error in root inclination prediction by the software. Mann-Whitney and Kruskal-Wallis tests were used. Intra-examiner error was evaluated using the Bland-Altman method. The maximum disparity in angle between images derived from digital models and CBCT data was almost 40 degrees (upper left canine). The upper and lower canines produced the worst results, followed by the lower lateral incisors. The upper central incisors showed the best results, although the maximum angle of difference exceeded 20 degrees (with the median around 8 degrees). Root morphology imaging prediction is not a primary function of this software and this study confirmed its limitation as a sole tool in routine clinical applications. At present these predictions cannot be considered accurate or reliable unless correlated clinically with a radiographic image
Number of Teeth Is Related to Craniofacial Morphology in Humans.
One of the most common dental anomalies in humans is the congenital absence of teeth, referred to as tooth agenesis. The association of tooth agenesis to craniofacial morphology has been previously investigated but remains unclear. We investigated this association by applying geometric morphometric methods in a large sample of modern humans. In line with previous studies, we report here that a reduced teeth number is linked to a less convex profile, as well as to a shorter face. The effects were similar for males and females; they increased as the severity of the tooth agenesis increased and remained unaltered by the inclusion of third molars and of allometry in the analysis. Furthermore, in cases with tooth agenesis only in the maxilla, there was no detectable effect in mandibular shape, whereas maxillary shape was affected independently of the location of missing teeth. The robustness of the present sample along with the shape analysis and the statistical approach applied, allowed for thorough testing of various contributing factors regarding the presence but also the magnitude of effects. The present findings suggest a relationship between number of teeth and overall craniofacial development and have evolutionary implications
- …