2,270 research outputs found
Analysis and design of a two-speed single-phase induction motor with 2 and 18 pole special windings
The motor presented employs multiple independent windings for operation with two very different pole numbers. The 18-pole field is produced with a symmetrical three-phase winding connected in a Steinmetz arrangement to a single-phase supply. A unified analysis method has been developed and used to demonstrate the equivalence of a Steinmetz delta or star connection with a main and auxiliary winding of a single-phase motor. The method has been experimentally validated and also included are some specific motor design considerations
Assessment of torque components in brushless permanent-magnet machines through numerical analysis of the electromagnetic field
For the calculation of torque in brushless (BL) alternating current motors a local method is proposed, based on the Maxwell stress theory and the filtered contributions due to the harmonics of the magnetic vector potential in the motor air gap. By considering the space fundamental field only, the method can efficiently estimate the average synchronous torque for a variety or motor topologies, including concentrated winding designs. For BL direct current motor analysis a global method is introduced, based on the virtual work principle expressed in terms of energy components in various motor regions. The method leads to simplifications in the average torque calculation and enables the direct identification of the cogging and ripple components. The mathematical procedures have been validated against experiments and other numerical techniques
Pre-determining the location of electromigrated gaps by nonlinear optical imaging
In this paper we describe a nonlinear imaging method employed to spatially
map the occurrence of constrictions occurring on an electrically-stressed gold
nanowire. The approach consists at measuring the influence of a tightly focused
ultrafast pulsed laser on the electronic transport in the nanowire. We found
that structural defects distributed along the nanowire are efficient nonlinear
optical sources of radiation and that the differential conductance is
significantly decreased when the laser is incident on such electrically-induced
morphological changes. This imaging technique is applied to pre-determined the
location of the electrical failure before it occurs.Comment: 3 figure
Computation of core losses in electrical machines using improved models for laminated steel
Two new models for specific power losses in cold-rolled motor lamination steel are described together with procedures for coefficient identification from standard multifrequency Epstein or single sheet tests. The eddy-current and hysteresis loss coefficients of the improved models are dependent on induction (flux density) and/or frequency, and the errors are substantially lower than those of conventional models over a very wide range of sinusoidal excitation, from 20 Hz to 2 kHz and from 0.05 up to 2 T. The model that considers the coefficients to be variable, with the exception of the hysteresis loss power coefficient that has a constant value of 2, is superior in terms of applicability and phenomenological support. Also included are a comparative study of the material models on three samples of typical steel, mathematical formulations for the extension from the frequency to the time domain, and examples of validation from electrical machine studies
On the variation with flux and frequency of the core loss coefficients in electrical machines
A model of core losses, in which the hysteresis coefficients are variable with the frequency and induction (flux density) and the eddy-current and excess loss coefficients are variable only with the induction, is proposed. A procedure for identifying the model coefficients from multifrequency Epstein tests is described, and examples are provided for three typical grades of non-grain-oriented laminated steel suitable for electric motor manufacturing. Over a wide range of frequencies between 20-400 Hz and inductions from 0.05 to 2 T, the new model yielded much lower errors for the specific core losses than conventional models. The applicability of the model for electric machine analysis is also discussed, and examples from an interior permanent-magnet and an induction motor are included
Lithium Isotopes A Tracer of Past and Present Silicate Weathering
Lithium isotopes are a relatively novel tracer of present and past silicate weathering processes
Lithium Isotopes: A Tracer of Past and Present Silicate Weathering
Lithium isotopes are a relatively novel tracer of present and past silicate weathering processes. Given that silicate weathering is the primary long-term method by which CO2 is removed from the atmosphere, Li isotope research is going through an exciting phase. We show the weathering processes that fractionate dissolved and sedimentary Li isotope ratios, focusing on weathering intensity and clay formation. We then discuss the carbonate and silicate archive potential of past seawater δ7Li. These archives have been used to examine Li isotope changes across both short and long timescales. The former can demonstrate the rates at which the climate is stabilised from perturbations via weathering, a fundamental piece of the puzzle of the long-term carbon cycle
Measurements of rhenium isotopic composition in low-abundance samples
Rhenium (Re) is a trace element whose redox chemistry makes it an ideal candidate to trace a range of geochemical processes. In particular, fractionation of its isotopes 187Re (62.6% abundance) and 185Re (37.4%) may be used to improve our understanding of redox reactions during weathering, both in the modern day and in geological archives. Published methods for measurement of Re isotopic composition are limited by the requirements of Re mass to reach a desirable precision, making the analysis of many geological materials unfeasible at present. Here we develop new methods which allow us to measure Re isotope ratios (reported as δ187Re) with improved precision: ±0.10‰ (2σ) for a mass of Re of ∼1 ng to ±0.03‰ (2σ) for a mass of Re of >10 ng. This is possible due to the combination of a modified column chemistry procedure and the use of 1013 Ω amplifiers for measurement via multicollector inductively coupled plasma mass spectrometry (MC-ICP-MS). For river water samples (with Re concentrations typically ∼10−12 g g−1) we design a field-based pre-concentration of Re that can be used with large volumes of filtered water (5–20 L) shortly after sample collection to provide abundant Re for isotope analysis. As a result of these developments we provide new measurements of δ187Re in standards reference materials (δ187Re values range from −0.06 ± 0.07‰ to +0.19 ± 0.05‰) and a seawater standard (δ187Re = +0.10 ± 0.04‰), providing impetus for further exploration of the Re isotope system
- …