2,721 research outputs found
Impression cytology with scanning electron microscopy: a new method in the study of conjunctival microvilli.
Numerical Simulation of Machining Nickel-Based Alloy
none3The phenomenological models for material flow stress and fracture, typically used in the Finite Element simulations of machining Nickel-based alloys, are often deemed to represent only certain metallurgical material states. In contrast, these models are not suitable to describe the constitutive behavior of the workpiece for different metallurgical states (i.e., annealed, aged, etc.) and, consequently, different hardness values. Since the description of the material behavior requires correct formulation of the constitutive law, new flow stress models which include also the hardness effect should be developed and used, for computer simulation of machining Nickel-based alloys. This paper describes the development of a hardness-based flow stress and fracture models for machining Inconel 718 alloy which can be applied for a wide range of work material hardness. These models have been implemented in a non-isothermal viscoplastic numerical model to simulate the influence of work material hardness on the chip formation process. The predicted results are being validated with experimental results properly carried out for this research. They are found to satisfactory predict the cutting forces, the temperature and the chip morphology from continuous to segmented chip as the hardness values changeopenDel Prete A.; Filice L.; Umbrello D.;DEL PRETE, Antonio; Filice, L.; Umbrello, D
Finite element modeling of microstructural changes in hard machining of SAE 8620
Surface and subsurface microstructural characterization after machining operations is a topic of great interest for both academic and industrial research activities. This paper presents a newly developed finite element (FE) model able to describe microstructural evolution and dynamic recrystallization (DRX) during orthogonal hard machining of SAE 8620 steel. In particular, it predicts grain size and hardness variation by implementing a user subroutine involving a hardness-based flow stress and empirical models. The model is validated by comparing its output with the experimental results available in literature at varying the cutting speed, inser0000-0001-6268-6720t geometry and flank wear. The results show a good ability of the customized model to predict the thermo-mechanical and microstructural phenomena taking place during the selected processes
Innovative manufacturing process of functionalized PA2200 for reduced adhesion properties
This work proposes an approach to fabricate micro patterned surfaces on PA2200 polyamide in order to improve its performance in terms of wettability and adhesion. In more detail, the present work aims to change the wettability of the surface and decrease their bacteria adhesion tendency. The experimental procedure consists of imprinting a set of different micro patterned structures over the polymer in order to verify the effectiveness of the methodology to change the contact angle of the surface, and in turn, reduce the occurrence of bacteria adhesion. Four different surface patterning were produced by laser ablation of a commercially pure titanium alloy, and then imprinted over the polyamide by surface stamping. The resulting surfaces were analyzed by topographical characterization and scanning electron microscopy. The wettability was probed by contact angle measurements while the bacteria adhesion was analyzed by adhesion test. The experimental results demonstrate the effectiveness of the method to modify the surface characteristics and to obtain a reliable patterned surface without using chemical hazardous material; opening to the possibility to replicate more complex structures and to obtain graded engineering surfaces
Caspase-independent programmed cell death triggers Ca2PO4 deposition in an in vitro model of nephrocalcinosis
We provide evidence of caspase-independent cell death triggering the calcification process in GDNF-silenced HK-2 cells
Cell death in the kidney
Apoptotic cell death is usually a response to the cell’s microenvironment. In the kidney, apoptosis contributes to parenchymal cell loss in the course of acute and chronic renal injury, but does not trigger an inflammatory response. What distinguishes necrosis from apoptosis is the rupture of the plasma membrane, so necrotic cell death is accompanied by the release of unprocessed intracellular content, including cellular organelles, which are highly immunogenic proteins. The relative contribution of apoptosis and necrosis to injury varies, depending on the severity of the insult. Regulated cell death may result from immunologically silent apoptosis or from immunogenic necrosis. Recent advances have enhanced the most revolutionary concept of regulated necrosis. Several modalities of regulated necrosis have been described, such as necroptosis, ferroptosis, pyroptosis, and mitochondrial permeability transition-dependent regulated necrosis. We review the different modalities of apoptosis, necrosis, and regulated necrosis in kidney injury, focusing particularly on evidence implicating cell death in ectopic renal calcification. We also review the evidence for the role of cell death in kidney injury, which may pave the way for new therapeutic opportunities
USE OF THE NEUTROPHIL ACTIVATING PROTEIN OF HELICOBACTER PYLORI (HP-NAP) AND/OR OF ITS PORTIONS AS ADJUVANTS FOR THE DEVELOPMENT OF T HELPER TYPE 1 (TH1) IMMUNE RESPONSES
Replica symmetric evaluation of the information transfer in a two-layer network in presence of continuous+discrete stimuli
In a previous report we have evaluated analytically the mutual information
between the firing rates of N independent units and a set of multi-dimensional
continuous+discrete stimuli, for a finite population size and in the limit of
large noise. Here, we extend the analysis to the case of two interconnected
populations, where input units activate output ones via gaussian weights and a
threshold linear transfer function. We evaluate the information carried by a
population of M output units, again about continuous+discrete correlates. The
mutual information is evaluated solving saddle point equations under the
assumption of replica symmetry, a method which, by taking into account only the
term linear in N of the input information, is equivalent to assuming the noise
to be large. Within this limitation, we analyze the dependence of the
information on the ratio M/N, on the selectivity of the input units and on the
level of the output noise. We show analytically, and confirm numerically, that
in the limit of a linear transfer function and of a small ratio between output
and input noise, the output information approaches asymptotically the
information carried in input. Finally, we show that the information loss in
output does not depend much on the structure of the stimulus, whether purely
continuous, purely discrete or mixed, but only on the position of the threshold
nonlinearity, and on the ratio between input and output noise.Comment: 19 pages, 4 figure
A device to characterize optical fibres
ATLAS is a general purpose experiment approved for the LHC collider at CERN.
An important component of the detector is the central hadronic calorimeter; for
its construction more than 600,000 Wave Length Shifting (WLS) fibres
(corresponding to a total length of 1,120 Km) have been used.
We have built and put into operation a dedicated instrument for the
measurement of light yield and attenuation length over groups of 20 fibres at a
time.
The overall accuracy achieved in the measurement of light yield
(attenuation length) is 1.5% (3%).
We also report the results obtained using this method in the quality control
of a large sample of fibres.Comment: 17 pages 20 figeres submitted to NIM journa
- …