An Electrocorticographic Brain Interface in an Individual with Tetraplegia

Brain-computer interface (BCI) technology aims to help individuals with disability to control assistive devices and reanimate paralyzed limbs. Our study investigated the feasibility of an electrocorticography (ECoG)-based BCI system in an individual with tetraplegia caused by C4 level spinal cord injury. ECoG signals were recorded with a high-density 32-electrode grid over the hand and arm area of the left sensorimotor cortex. The participant was able to voluntarily activate his sensorimotor cortex using attempted movements, with distinct cortical activity patterns for different segments of the upper limb. Using only brain activity, the participant achieved robust control of 3D cursor movement. The ECoG grid was explanted 28 days post-implantation with no adverse effect. This study demonstrates that ECoG signals recorded from the sensorimotor cortex can be used for real-time device control in paralyzed individuals

Motor-related brain activity during action observation: A neural substrate for electrocorticographic brain-computer interfaces after spinal cord injury

After spinal cord injury (SCI), motor commands from the brain are unable to reach peripheral nerves and muscles below the level of the lesion. Action observation (AO), in which a person observes someone else performing an action, has been used to augment traditional rehabilitation paradigms. Similarly, AO can be used to derive the relationship between brain activity and movement kinematics for a motor-based brain-computer interface (BCI) even when the user cannot generate overt movements. BCIs use brain signals to control external devices to replace functions that have been lost due to SCI or other motor impairment. Previous studies have reported congruent motor cortical activity during observed and overt movements using magnetoencephalography (MEG) and functional magnetic resonance imaging (fMRI). Recent single-unit studies using intracortical microelectrodes also demonstrated that a large number of motor cortical neurons had similar firing rate patterns between overt and observed movements. Given the increasing interest in electrocorticography (ECoG)-based BCIs, our goal was to identify whether action observation-related cortical activity could be recorded using ECoG during grasping tasks. Specifically, we aimed to identify congruent neural activity during observed and executed movements in both the sensorimotor rhythm (10-40 Hz) and the high-gamma band (65-115 Hz) which contains significant movement-related information. We observed significant motor-related high-gamma band activity during AO in both able-bodied individuals and one participant with a complete C4 SCI. Furthermore, in able-bodied participants, both the low and high frequency bands demonstrated congruent activity between action execution and observation. Our results suggest that AO could be an effective and critical procedure for deriving the mapping from ECoG signals to intended movement for an ECoG-based BCI system for individuals with paralysis. © 2014 Collinger, Vinjamuri, Degenhart, Weber, Sudre, Boninger, Tyler-Kabara and Wang

Workshops of the Sixth International Brain–Computer Interface Meeting: brain–computer interfaces past, present, and future

Brain–computer interfaces (BCI) (also referred to as brain–machine interfaces; BMI) are, by definition, an interface between the human brain and a technological application. Brain activity for interpretation by the BCI can be acquired with either invasive or non-invasive methods. The key point is that the signals that are interpreted come directly from the brain, bypassing sensorimotor output channels that may or may not have impaired function. This paper provides a concise glimpse of the breadth of BCI research and development topics covered by the workshops of the 6th International Brain–Computer Interface Meeting

The impact of electrode characteristics on electrocorticography (ECoG)

Used clinically since Penfield and Jasper's pioneering work in the 1950's, electrocorticography (ECoG) has recently been investigated as a promising technology for brain-computer interfacing. Many researchers have attempted to analyze the properties of ECoG recordings, including prediction of optimal electrode spacing and the improved resolution expected with smaller electrodes. This work applies an analytic model of the volume conductor to investigate the sensitivity field of electrodes of various sizes. The benefit to spatial resolution was minimal for electrodes smaller than 1mm, while smaller electrodes caused a dramatic decrease in signal-to-noise ratio. The temporal correlation between electrode pairs is predicted over a range of spacings and compared to correlation values from a series of recordings in subjects undergoing monitoring for intractable epilepsy. The observed correlations are found to be much higher than predicted by the analytic model and suggest a more detailed model of cortical activity is needed to identify appropriate ECoG grid spacing. © 2011 IEEE

Classification of hand posture from electrocorticographic signals recorded during varying force conditions

In the presented work, standard and high-density electrocorticographic (ECoG) electrodes were used to record cortical field potentials in three human subjects during a hand posture task requiring the application of specific levels of force during grasping. We show two-class classification accuracies of up to 80% are obtained when classifying between two-finger pinch and whole-hand grasp hand postures despite differences in applied force levels across trials. Furthermore, we show that a four-class classification accuracy of 50% is achieved when predicting both hand posture and force level during a two-force, two-hand-posture grasping task, with hand posture most reliably predicted during high-force trials. These results suggest that the application of force plays a significant role in ECoG signal modulation observed during motor tasks, emphasizing the potential for electrocorticography to serve as a source of control signals for dexterous neuroprosthetic devices. © 2011 IEEE

Toward synergy-based brain-machine interfaces

This paper demonstrates a synergy-based brain-machine interface that uses low-dimensional command signals to control a high dimensional virtual hand. First, temporal postural synergies were extracted from the angular velocities of finger joints of five healthy subjects when they performed hand movements that were similar to activities of daily living. Two synergies inspired from the extracted synergies, namely, two-finger pinch and whole-hand grasp, were used in real-time brain control, where a virtual hand with 10 degrees of freedom was controlled to grasp or pinch virtual objects. These two synergies were controlled by electrocorticographic (ECoG) signals recorded from two electrodes of an electrode array that spanned motor and speech areas of an individual with intractable epilepsy, thus demonstrating closed loop control of a synergy-based brain-machine interface. © 2006 IEEE

A fuzzy logic model for hand posture control using human cortical activity recorded by micro-ECoG electrodes

This paper presents a fuzzy logic model to decode the hand posture from electro-cortico graphic (ECoG) activity of the motor cortical areas. One subject was implanted with a micro-ECoG electrode array on the surface of the motor cortex. Neural signals were recorded from 14 electrodes on this array while Subject participated in three reach and grasp sessions. In each session, Subject reached and grasped a wooden toy hammer for five times. Optimal channels/electrodes which were active during the task were selected. Power spectral densities of optimal channels averaged over a time period of 1/2 second before the onset of the movement and 1 second after the onset of the movement were fed into a fuzzy logic model. This model decoded whether the posture of the hand is open or closed with 80% accuracy. Hand postures along the task time were decoded by using the output from the fuzzy logic model by two methods (i) velocity based decoding (ii) acceleration based decoding. The latter performed better when hand postures predicted by the model were compared to postures recorded by a data glove during the experiment. This fuzzy logic model was imported to MATLAB® SIMULINK to control a virtual hand. ©2009 IEEE

Human motor cortical activity recorded with Micro-ECoG electrodes, during individual finger movements

In this study human motor cortical activity was recorded with a customized micro-ECoG grid during individual finger movements. The quality of the recorded neural signals was characterized in the frequency domain from three different perspectives: (1) coherence between neural signals recorded from different electrodes, (2) modulation of neural signals by finger movement, and (3) accuracy of finger movement decoding. It was found that, for the high frequency band (60-120 Hz), coherence between neighboring micro-ECoG electrodes was 0.3. In addition, the high frequency band showed significant modulation by finger movement both temporally and spatially, and a classification accuracy of 73% (chance level: 20%) was achieved for individual finger movement using neural signals recorded from the micro-ECoG grid. These results suggest that the micro-ECoG grid presented here offers sufficient spatial and temporal resolution for the development of minimally-invasive brain-computer interface applications. ©2009 IEEE

Bypassing stroke-damaged neural pathways via a neural interface induces targeted cortical adaptation

手の運動機能を持たない脳領域に人工神経接続システムを使って新たに運動機能を付与することに成功. 京都大学プレスリリース. 2019-10-21.Regaining the function of an impaired limb is highly desirable in paralyzed individuals. One possible avenue to achieve this goal is to bridge the interrupted pathway between preserved neural structures and muscles using a brain–computer interface. Here, we demonstrate that monkeys with subcortical stroke were able to learn to use an artificial cortico-muscular connection (ACMC), which transforms cortical activity into electrical stimulation to the hand muscles, to regain volitional control of a paralysed hand. The ACMC induced an adaptive change of cortical activities throughout an extensive cortical area. In a targeted manner, modulating high-gamma activity became localized around an arbitrarily-selected cortical site controlling stimulation to the muscles. This adaptive change could be reset and localized rapidly to a new cortical site. Thus, the ACMC imparts new function for muscle control to connected cortical sites and triggers cortical adaptation to regain impaired motor function after stroke

Instrumented measurements of knee laxity: KT-1000 versus navigation

The KT-1000 is widely accepted as a tool for the instrumented measurement of the antero-posterior (AP) tibial translation. The aim of this study is to compare the data obtained with the KT-1000 in ACL deficient knees with the data obtained using a navigation system during "in vivo" ACL reconstruction procedures and to validate the accuracy of the KT-1000. An ACL reconstruction was performed using computer aided surgical navigation (Orthopilot, B-Braun, Aesculap, Tuttlingen, Germany) in 30 patients. AP laxity measurements were obtained for all patients using KT-1000 arthrometer (in a conscious state and under general anaesthesia) and during surgery using the navigation system, always at 30A degrees of knee flexion. The mean AP translation was 14 +/- A 4 and 15.6 +/- A 3.8 mm using the KT-1000 in conscious and under general anaesthesia, respectively (P = 0.02) and 16.1 +/- A 3.7 mm using navigation. Measurements obtained with the KT-1000 under general anaesthesia were no different from those obtained "in vivo" with the navigation system (P = 0.37). In conclusion this study validates the accuracy of the KT-1000 to exactly calculate AP translation of the tibia, in comparison with the more accurate measurements obtained using a navigation system