Plastic pre-compression and creep damage effects on the fracture toughness behaviour of Type 316H stainless steel

The influence of inelastic damage in the form of plastic pre-strain and creep damage, on fracture toughness of Type 316H stainless steel has been examined. Creep damage has been introduced into the 8% pre-compressed material by interrupting creep crack growth tests. Comparisons have been made between the fracture toughness test results from the as-received, pre-compressed and creep damaged materials. Furthermore, the effects of creep crack discontinuities on the crack tip strain fields have been examined by digital image correlation measurements. Inelastic damage was found to reduce the fracture toughness of the material, with creep damage having more severe effects than pre-strain

Thermal Casimir drag in fluctuating classical fields

A uniformly moving inclusion which locally suppresses the fluctuations of a classical thermally excited field is shown to experience a drag force which depends on the dynamics of the field. It is shown that in a number of cases the linear friction coefficient is dominated by short distance fluctuations and takes a very simple form. Examples where this drag can occur are for stiff objects, such as proteins, nonspecifically bound to more flexible ones such as polymers and membranes.Comment: 4 pages RevTex, 2 figure

Direct Detection of Products from the Pyrolysis of 2-Phenethyl Phenyl Ether

The pyrolysis of 2-phenethyl phenyl ether (PPE, C_6H_5C_2H_4OC_6H_5) in a hyperthermal nozzle (300-1350 °C) was studied to determine the importance of concerted and homolytic unimolecular decomposition pathways. Short residence times (<100 μs) and low concentrations in this reactor allowed the direct detection of the initial reaction products from thermolysis. Reactants, radicals, and most products were detected with photoionization (10.5 eV) time-of-flight mass spectrometry (PIMS). Detection of phenoxy radical, cyclopentadienyl radical, benzyl radical, and benzene suggest the formation of product by the homolytic scission of the C_6H_5C_2H_4-OC_6H_5 and C_6H_5CH_2-CH_2OC_6H_5 bonds. The detection of phenol and styrene suggests decomposition by a concerted reaction mechanism. Phenyl ethyl ether (PEE, C_6H_5OC_2H_5) pyrolysis was also studied using PIMS and using cryogenic matrix-isolated infrared spectroscopy (matrix-IR). The results for PEE also indicate the presence of both homolytic bond breaking and concerted decomposition reactions. Quantum mechanical calculations using CBS-QB3 were conducted, and the results were used with transition state theory (TST) to estimate the rate constants for the different reaction pathways. The results are consistent with the experimental measurements and suggest that the concerted retro-ene and Maccoll reactions are dominant at low temperatures (below 1000 °C), whereas the contribution of the C_6H_5C_2H_4-OC_6H_5 homolytic bond scission reaction increases at higher temperatures (above 1000 °C)

Diffusion of active tracers in fluctuating fields

The problem of a particle diffusion in a fluctuating scalar field is studied. In contrast to most studies of advection diffusion in random fields we analyze the case where the particle position is also coupled to the dynamics of the field. Physical realizations of this problem are numerous and range from the diffusion of proteins in fluctuating membranes and the diffusion of localized magnetic fields in spin systems. We present exact results for the diffusion constant of particles diffusing in dynamical Gaussian fields in the adiabatic limit where the field evolution is much faster than the particle diffusion. In addition we compute the diffusion constant perturbatively, in the weak coupling limit where the interaction of the particle with the field is small, using a Kubo-type relation. Finally we construct a simple toy model which can be solved exactly.Comment: 13 pages, 1 figur

Crew Exploration Vehicle Launch Abort Controller Performance Analysis

This paper covers the simulation and evaluation of a controller design for the Crew Module (CM) Launch Abort System (LAS), to measure its ability to meet the abort performance requirements. The controller used in this study is a hybrid design, including features developed by the Government and the Contractor. Testing is done using two separate 6-degree-of-freedom (DOF) computer simulation implementations of the LAS/CM throughout the ascent trajectory: 1) executing a series of abort simulations along a nominal trajectory for the nominal LAS/CM system; and 2) using a series of Monte Carlo runs with perturbed initial flight conditions and perturbed system parameters. The performance of the controller is evaluated against a set of criteria, which is based upon the current functional requirements of the LAS. Preliminary analysis indicates that the performance of the present controller meets (with the exception of a few cases) the evaluation criteria mentioned above

Estimating the Social Welfare Effects of New Zealand Apple Imports

This paper provides a demonstration of how a comprehensive economic framework, which takes into account both the gains from trade and the costs of invasive species outbreaks, can inform decision-makers when making quarantine decisions. Using the theoretical framework developed in Cook and Fraser (2008) an empirical estimation is made of the economic welfare consequences for Australia of allowing quarantine-restricted trade in New Zealand apples to take place. The results suggest the returns to Australian society from importing New Zealand apples are likely to be negative. The price differential between the landed product with SPS measures in place and the autarkic price is insufficient to outweigh the increase in expected damage resulting from increased fire blight risk. As a consequence, this empirical analysis suggests the net benefits created by opening up this trade are marginal.International Relations/Trade,

Interpretation of creep crack growth data for ½ CMV steel weldments

Abstract½Cr½ Mo¼ V (½ CMV) steel has been used in high temperature power plant piping due to its enhanced weld properties. Creep crack growth testing has been performed on compact tension C(T) specimens of ½CMV (low alloy ferritic) steel at 540◦C on both parent metal specimens as well as fine and coarse grained heat affected zone (HAZ) specimens, where the initial crack is located within the HAZ. The data has been interpreted using the fracture mechanics parameter C* against the crack growth rate. The creep toughness parameter, Kcmat, is also evaluated for the material. It was seen that, for a given C* value, the fine grained HAZ material generally exhibits higher crack growth rates than the post weld heat treated coarse grained HAZ

Chk1 requirement for high global rates of replication fork progression during normal vertebrate S phase

Chk1 protein kinase maintains replication fork stability in metazoan cells in response to DNA damage and DNA replication inhibitors. Here, we have employed DNA fiber labeling to quantify, for the first time, the extent to which Chk1 maintains global replication fork rates during normal vertebrate S phase. We report that replication fork rates in Chk1¿/¿ chicken DT40 cells are on average half of those observed with wild-type cells. Similar results were observed if Chk1 was inhibited or depleted in wild-type DT40 cells or HeLa cells by incubation with Chk1 inhibitor or small interfering RNA. In addition, reduced rates of fork extension were observed with permeabilized Chk1¿/¿ cells in vitro. The requirement for Chk1 for high fork rates during normal S phase was not to suppress promiscuous homologous recombination at replication forks, because inhibition of Chk1 similarly slowed fork progression in XRCC3¿/¿ DT40 cells. Rather, we observed an increased number of replication fibers in Chk1¿/¿ cells in which the nascent strand is single-stranded, supporting the idea that slow global fork rates in unperturbed Chk1¿/¿ cells are associated with the accumulation of aberrant replication fork structure

Imaging Polarimeter Arrays for Near-Millimeter Waves

An integrated-circuit antenna array has been developed that images both polarization and intensity. The array consists of a row of antennas that lean alternately left and right, creating two interlaced sub-arrays that respond to different polarizations. The arrays and the bismuth bolometer detectors are made by a photoresist shadowing technique that requires only one photolithographic mask. The array has measured polarization at a wavelength of 800 µm with an absolute accuracy of 0.8° and a relative precision of 7 arc min. and has demonstrated nearly diffraction-Iimited resolutiort of a 20° step in polarization