5,862 research outputs found
Structural Properties of the Disordered Spherical and other Mean Field Spin Models
We extend the approach of Aizenman, Sims and Starr for the SK-type models to
their spherical versions. Such an extension has already been performed for
diluted spin glasses. The factorization property of the optimal structures
found by Guerra for the SK model, which holds for diluted models as well, is
verified also in the case of spherical systems, with the due modifications.
Hence we show that there are some common structural features in various mean
field spin models. These similarities seem to be quite paradigmatic, and we
summarize the various techniques typically used to prove the structural
analogies and to tackle the computation of the free energy per spin in the
thermodynamic limit.Comment: 24 page
Spin-independent and double-spin cos(phi) asymmetries in semi-inclusive pion electroproduction
We consider the cos(phi) dependence of the longitudinal double-spin asymmetry
for charged pion electroproduction in semi-inclusive deep inelastic scattering,
emphasizing intrinsic transverse momentum effects. This azimuthal asymmetry
allows to measure the cos(phi) moments of the unpolarized and double-spin
cross-section, simultaneously. The size of the asymmetry, in the approximation
where all twist-3 interaction-dependent distribution and fragmentation
functions are set to zero, is estimated for HERMES kinematics; both the
spin-independent and the double-spin cos(phi) moments are predicted to be
sizeable and negative.Comment: LaTeX, 4 pages, 4 figures. Discussion on the acceptance effects
added; recent parameterizations of distribution and fragmentation functions
used, figures replaced. Final version to appear in Physics Letters
Azimuthal Asymmetries: Access to Novel Structure Functions
One of the most interesting consequence of non-zero intrinsic transverse
momentum of partons in the nucleon is the nontrivial azimuthal dependence of
the cross section of hard scattering processes. Many of the observable
asymmetries contain unknown functions which provide essential information on
the quark and gluon structure. Several of them have been studied in the last
few years; we discuss their qualitative and quantitative features in
semi-inclusive DIS.Comment: 6 pages, LaTeX, 7 eps figures, Talk presented at the 15th
International Spin Physics Symposium, Spin 2002, Brookhaven National
Laboratory, September 9-14, 200
Kinematical contributions to the transverse asymmetry in semi-inclusive DIS
We discuss the contributions of the transverse spin component of the target
to the double-spin asymmetries in semi-inclusive deep inelastic scattering of
longitudinally polarized electrons off longitudinally polarized protons.Comment: LaTeX, 4 pages, 4 figures, uses espcrc1.sty, talk presented at the
European Workshop on the QCD Structure of the Nucleon (QCD-N'02), Ferrara,
Italy, April 3-6, 200
Assessing radiative transfer models trained by numerical weather forecasts using sun-tracking radiometric measurements for satellite link characterization up to W band
Radio communications, and in particular Earth-to-satellite
links, are worldwide used for delivering digital services.
The bandwidth demand of such services is increasing
accordingly to the advent of more advanced applications
(e.g., multimedia services, deep-space explorations, etc.)
thus pushing the scientific community toward the
investigation of channel carriers at higher frequencies.
When using carrier frequencies above X band, the main
drawback is how to tackle the impact of tropospheric
processes (i.e., rain, cloud, water vapor). This work
assesses the joint use of weather forecast models, radiative
transfer models and Sun-tracking radiometric
measurements to explore their potential benefits in
predicting path attenuation and sky noise temperature for
slant paths at frequencies between K and W band, thus
paving the way to the optimization of satellite link-budgets
Electromagnetic Form Factors in the hypercentral CQM
We report on the recent results of the hypercentral Constituent Quark Model
(hCQM). The model contains a spin independent three-quark interaction which is
inspired by Lattice QCD calculations and reproduces the average energy values
of the SU(6) multiplets. The splittings are obtained with a SU(6)-breaking
interaction, which can include also an isospin dependent term. Concerning
Constituent Quark models, we have shown for the first time that the decreasing
of the ratio of the elastic form factors of the proton is due to relativistic
effects using relativistic corrections to the e.m. current and boosts. Now the
elastic nucleon form factors have been recalculated, using a relativistic
version of the hCQM and a relativistic quark current showing a very detailed
reproduction of all the four form factor existing data over the complete range
of 0-4 . Futhermore, the model has been used for predictions concerning
the electromagnetic transverse and longitudinal transition form factors giving
a good description of the medium behaviour. We show that the
discrepancies in the reproduction of the helicity amplitudes at low are
due to pion loops. We have calculated the helicity amplitudes for all the 3 and
4 star resonances opening the possibility of application to the evaluation of
cross sections.Comment: 5 pages, 7 figures, Invited talk at the ICTP 4th International
Conference on Perspectives in Hadronic Physics, Trieste, Italy, 12-16 May
2003. Accepted by Eur. Phys. J.
Quark contact interactions at the LHC
Quark contact interactions are an important signal of new physics. We
introduce a model in which the presence of a symmetry protects these new
interactions from giving large corrections in flavor changing processes at low
energies. This minimal model provides the basic set of operators which must be
considered to contribute to the high-energy processes. To discuss their
experimental signature in jet pairs produced in proton-proton colllisions, we
simplify the number of possible operators down to two. We show (for a
representative integrated luminosity of 200 pb^-1 at \surd s = 7 TeV) how the
presence of two operators significantly modifies the bound on the
characteristic energy scale of the contact interactions which is obtained by
keeping a single operator.Comment: 8 pages, 2 figure
Thermal Evolution and Stability of Pr2O3-doped ZrO2 Powder and Thin Films
AbstractZrO2 powders and films with 5, 8, 9 and 10mol % of Pr2O3 were prepared by a modified sol-gel method using liquid precursors. The thermal stability of the different phases is crucial in order to use this material in devices such as fuel cells, where the appearance of unwanted spurious phases causes a negative impact in the efficiency of such devices. DTA-TG and HT-XRD analysis carried out on the powders show that crystallization takes place around 500°C. Heat treatments over 1000°C produces destabilization of the initial crystallization cubic phase in the powders as well as in the films. However, aging treatments consisting in thermal cycles between room temperature and 750°C, which is the temperature of technological interest, do not affect the structure, the microstructure and the stresses state of the Pr-doped ZO2 thin films
Electroproduction of nucleon resonances
The unitary isobar model MAID has been extended and used for a partial wave
analysis of pion photo- and electroproduction in the resonance region W < 2
GeV. Older data from the world data base and more recent experimental results
from Mainz, Bates, Bonn and JLab for Q^2 up to 4.0 (GeV/c)^2 have been analyzed
and the Q^2 dependence of the helicity amplitudes have been extracted for a
series of four star resonances. We compare single-Q^2 analyses with a
superglobal fit in a new parametrization of Maid2003 together with predictions
of the hypercentral constituent quark model. As a result we find that the
helicity amplitudes and transition form factors of constituent quark models
should be compared with the analysis of bare resonances, where the pion cloud
contributions have been subtracted.Comment: 6 pages Latex including 5 figures, Invited talk at ICTP 4th
International Conference on Perspectives in Hadronic Physics, Trieste, Italy,
12-16 May 200
Graphene-based light sensing: fabrication, characterisation, physical properties and performance
This is the final version. Available from MDPI via the DOI in this record.Graphene and graphene-based materials exhibit exceptional optical and electrical properties with great promise for novel applications in light detection. However, several challenges prevent the full exploitation of these properties in commercial devices. Such challenges include the limited linear dynamic range (LDR) of graphene-based photodetectors, the lack of efficient generation and extraction of photoexcited charges, the smearing of photoactive junctions due to hot-carriers effects, large-scale fabrication and ultimately the environmental stability of the constituent materials. In order to overcome the aforementioned limits, different approaches to tune the properties of graphene have been explored. A new class of graphene-based devices has emerged where chemical functionalisation, hybridisation with light-sensitising materials and the formation of heterostructures with other 2D materials have led to improved performance, stability or versatility. For example, intercalation of graphene with FeCl3 is highly stable in ambient conditions and can be used to define photo-active junctions characterized by an unprecedented LDR while graphene oxide (GO) is a very scalable and versatile material which supports the photodetection from UV to THz frequencies. Nanoparticles and quantum dots have been used to enhance the absorption of pristine graphene and to enable high gain thanks to the photogating effect. In the same way, hybrid detectors made from stacked sequences of graphene and layered transition-metal dichalcogenides enabled a class of detectors with high gain and responsivity. In this work we will review the performance and advances in functionalised graphene and hybrid photodetectors, with particular focus on the physical mechanisms governing the photoresponse in these materials, their performance and possible future paths of investigation.Funding: M.F.C. and S.R. acknowledge financial support from: Engineering and Physical Sciences Research
Council (EPSRC) of the United Kingdom, projects EP/M002438/1, EP/M001024/1, EPK017160/1, EP/K031538/1,
EP/J000396/1; the Royal Society, grant title "Room temperature quantum technologies" and "Wearable graphene
photovolotaic"; Newton fund, Uk-Brazil exchange grant title "Chronographene" and the Leverhulme Trust,
research grants "Quantum drums" and "Quantum revolution". J.D.M. acknowledges financial support from the
Engineering and Physical Sciences Research Council (EPSRC) of the United Kingdom, via the EPSRC Centre for
Doctoral Training in Metamaterials, Grant No. EP/L015331/1
- …