The X-ray spectrum of the Seyfert I galaxy Markarian 766: Dusty warm absorber or relativistic emission lines?

Competing models for broad spectral features in the soft X-ray spectrum of the Seyfert I galaxy Mrk 766 are tested against data from a 130 ks XMM-Newton observation. A model including relativistically broadened Lyalpha emission lines of O VIII N VII and C VI is a better fit to 0.3-2 keV XMM RGS data than a dusty warm absorber. Moreover, the measured depth of neutral iron absorption lines in the spectrum is inconsistent with the magnitude of the iron edge required to produce the continuum break at 17-18 Angstrom in the dusty warm absorber model. The relativistic emission line model can reproduce the broadband (0.1-12 keV) XMM EPIC data with the addition of a fourth line to represent emission from ionized iron at 6.7 keV and an excess due to reflection at energies above the iron line. The pro le of the 6.7 keV iron line is consistent with that measured for the low-energy lines. There is evidence in the RGS data, at the 3sigma level, of spectral features that vary with source flux. The covering fraction of warm absorber gas is estimated to be 12%. Iron in the warm absorber is found to be overabundant with respect to CNO, compared to solar values

Brain Targeting Nanomedicines: Pitfalls and Promise

Aleksandr Kakinen,1,2 Yuhao Jiang,2 Thomas Paul Davis,2 Tambet Teesalu,3,4 Mart Saarma1 1Institute of Biotechnology, HiLIFE, University of Helsinki, Helsinki, Finland; 2Australian Institute for Bioengineering and Nanotechnology, University of Queensland, Brisbane, QLD, Australia; 3Institute of Biomedicine and Translational Medicine, Faculty of Medicine, University of Tartu, Tartu, Estonia; 4Materials Research Laboratory, University of California Santa Barbara, Santa Barbara, CA, USACorrespondence: Mart Saarma, Institute of Biotechnology, HiLIFE, University of Helsinki, Viikinkaari 5D, Helsinki, 00790, Finland, Tel +358505002726 ; +358294159378, Email [email protected] Aleksandr Kakinen, Australian Institute for Bioengineering and Nanotechnology, University of Queensland, Building 75, Cnr College Road& Cooper Road, St Lucia, QLD, 4067, Australia, Tel +61 7 344 63152, Email [email protected]: Brain diseases are the most devastating problem among the world’s increasingly aging population, and the number of patients with neurological diseases is expected to increase in the future. Although methods for delivering drugs to the brain have advanced significantly, none of these approaches provide satisfactory results for the treatment of brain diseases. This remains a challenge due to the unique anatomy and physiology of the brain, including tight regulation and limited access of substances across the blood-brain barrier. Nanoparticles are considered an ideal drug delivery system to hard-to-reach organs such as the brain. The development of new drugs and new nanomaterial-based brain treatments has opened various opportunities for scientists to develop brain-specific delivery systems that could improve treatment outcomes for patients with brain disorders such as Alzheimer’s disease, Parkinson’s disease, stroke and brain tumors. In this review, we discuss noteworthy literature that examines recent developments in brain-targeted nanomedicines used in the treatment of neurological diseases.Keywords: brain delivery, blood-brain barrier, targeted delivery, nanoparticle, neurodegenerative diseases, stroke, cance

Exact Speedup Factors and Sub-Optimality for Non-Preemptive Scheduling

Fixed priority scheduling is used in many real-time systems; however, both preemptive and non-preemptive variants (FP-P and FP-NP) are known to be sub-optimal when compared to an optimal uniprocessor scheduling algorithm such as preemptive earliest deadline first (EDF-P). In this paper, we investigate the sub-optimality of fixed priority non-preemptive scheduling. Specifically, we derive the exact processor speed-up factor required to guarantee the feasibility under FP-NP (i.e. schedulability assuming an optimal priority assignment) of any task set that is feasible under EDF-P. As a consequence of this work, we also derive a lower bound on the sub-optimality of non-preemptive EDF (EDF-NP). As this lower bound matches a recently published upper bound for the same quantity, it closes the exact sub-optimality for EDF-NP. It is known that neither preemptive, nor non-preemptive fixed priority scheduling dominates the other, in other words, there are task sets that are feasible on a processor of unit speed under FP-P that are not feasible under FP-NP and vice-versa. Hence comparing these two algorithms, there are non-trivial speedup factors in both directions. We derive the exact speed-up factor required to guarantee the FP-NP feasibility of any FP-P feasible task set. Further, we derive the exact speed-up factor required to guarantee FP-P feasibility of any constrained-deadline FP-NP feasible task set

TOR Complex 2-regulated protein kinase Ypk1 controls sterol distribution by inhibiting StARkin domain-containing proteins located at plasma membrane-endoplasmic reticulum contact sites

In our proteome-wide screen (Muir et al. 2014 Elife), Ysp2 (also known as Lam2/Ltc4) was identified as a likely physiologically relevant target of TORC2-dependent protein kinase Ypk1 in the yeast Saccharomyces cerevisiae. Ysp2 was subsequently shown to be one of a new family of sterol-binding proteins located at plasma membrane (PM)-endoplasmic reticulum (ER) contact sites (Gatta et al. 2015 Elife). Here we document that Ysp2 and its paralog Lam4/Ltc3 are authentic Ypk1 substrates in vivo and show using genetic and biochemical criteria that Ypk1-mediated phosphorylation inhibits the ability of these proteins to promote retrograde transport of sterols from the PM to the ER. Furthermore, we provide evidence that a change in PM sterol homeostasis promotes cell survival under membrane-perturbing conditions known to activate TORC2-Ypk1 signaling. These observations define the underlying molecular basis of a new regulatory mechanism for cellular response to plasma membrane stress

The role of predicted chemotactic and hydrocarbon degrading taxa in natural source zone depletion at a legacy petroleum hydrocarbon site

Petroleum hydrocarbon contamination is a global problem which can cause long-term environmental damage and impacts water security. Natural source zone depletion (NSZD) is the natural degradation of such contaminants. Chemotaxis is an aspect of NSZD which is not fully understood, but one that grants microorganisms the ability to alter their motion in response to a chemical concentration gradient potentially enhancing petroleum NSZD mass removal rates. This study investigates the distribution of potentially chemotactic and hydrocarbon degrading microbes (CD) across the water table of a legacy petroleum hydrocarbon site near Perth, Western Australia in areas impacted by crude oil, diesel and jet fuel. Core samples were recovered and analysed for hydrocarbon contamination using gas chromatography. Predictive metagenomic profiling was undertaken to infer functionality using a combination of 16 S rRNA sequencing and PICRUSt2 analysis. Naphthalene contamination was found to significantly increase the occurrence of potential CD microbes, including members of the Comamonadaceae and Geobacteraceae families, which may enhance NSZD. Further work to explore and define this link is important for reliable estimation of biodegradation of petroleum hydrocarbon fuels. Furthermore, the outcomes suggest that the chemotactic parameter within existing NSZD models should be reviewed to accommodate CD accumulation in areas of naphthalene contamination, thereby providing a more accurate quantification of risk from petroleum impacts in subsurface environments, and the scale of risk mitigation due to NSZD

An extensible framework for multicore response time analysis

In this paper, we introduce a multicore response time analysis (MRTA) framework, which decouples response time analysis from a reliance on context independent WCET values. Instead, the analysis formulates response times directly from the demands placed on different hardware resources. The MRTA framework is extensible to different multicore architectures, with a variety of arbitration policies for the common interconnects, and different types and arrangements of local memory. We instantiate the framework for single level local data and instruction memories (cache or scratchpads), for a variety of memory bus arbitration policies, including: Round-Robin, FIFO, Fixed-Priority, Processor-Priority, and TDMA, and account for DRAM refreshes. The MRTA framework provides a general approach to timing verification for multicore systems that is parametric in the hardware configuration and so can be used at the architectural design stage to compare the guaranteed levels of real-time performance that can be obtained with different hardware configurations. We use the framework in this way to evaluate the performance of multicore systems with a variety of different architectural components and policies. These results are then used to compose a predictable architecture, which is compared against a reference architecture designed for good average-case behaviour. This comparison shows that the predictable architecture has substantially better guaranteed real-time performance, with the precision of the analysis verified using cycle-accurate simulation

Group Visits: Promoting Adherence to Diabetes Guidelines

BACKGROUND: Current diabetes management guidelines offer blueprints for providers, yet type 2 diabetes control is often poor in disadvantaged populations. The group visit is a new treatment modality originating in managed care for efficient service delivery to patients with chronic health problems. Group visits offer promise for delivering care to diabetic patients, as visits are lengthier and can be more frequent, more organized, and more educational. OBJECTIVE: To evaluate the effect of group visits on clinical outcomes, concordance with 10 American Diabetes Association (ADA) guidelines [American Diabetes Association, Diabetes Care, 28:S4–36, 2004] and 3 United States Preventive Services Task Force (USPSTF) cancer screens [U.S. Preventive Services Task Force, http://www.ahrq.gov/clinic/uspstf/resource.htm, 2003]. RESEARCH DESIGN AND METHODS: A 12-month randomized controlled trial of 186 diabetic patients comparing care in group visits with care in the traditional patient–physician dyad. Clinical outcomes (HbA1c, blood pressure [BP], lipid profiles) were assessed at 6 and 12 months and quality of care measures (adherence to 10 ADA guidelines and 3 USPSTF cancer screens) at 12 months. RESULTS: At both measurement points, HbA1c, BP, and lipid levels did not differ significantly for patients attending group visits versus those in usual care. At 12 months, however, patients receiving care in group visits exhibited greater concordance with ADA process-of-care indicators (p < .0001) and higher screening rates for cancers of the breast (80 vs. 68%, p = .006) and cervix (80 vs 68%, p = .019). CONCLUSIONS: Group visits can improve the quality of care for diabetic patients, but modifications to the content and style of group visits may be necessary to achieve improved clinical outcomes

A custom-made guide-wire positioning device for Hip Surface Replacement Arthroplasty: description and first results

<p>Abstract</p> <p>Background</p> <p>Hip surface replacement arthroplasty (SRA) can be an alternative for total hip arthroplasty. The short and long-term outcome of hip surface replacement arthroplasty mainly relies on the optimal size and position of the femoral component. This can be defined before surgery with pre-operative templating. Reproducing the optimal, templated femoral implant position during surgery relies on guide wire positioning devices in combination with visual inspection and experience of the surgeon. Another method of transferring the templated position into surgery is by navigation or Computer Assisted Surgery (CAS). Though CAS is documented to increase accurate placement particularly in case of normal hip anatomy, it requires bulky equipment that is not readily available in each centre.</p> <p>Methods</p> <p>A custom made neck jig device is presented as well as the results of a pilot study.</p> <p>The device is produced based on data pre-operatively acquired with CT-scan. The position of the guide wire is chosen as the anatomical axis of the femoral neck. Adjustments to the design of the jig are made based on the orthopedic surgeon's recommendations for the drill direction. The SRA jig is designed as a slightly more-than-hemispherical cage to fit the anterior part of the femoral head. The cage is connected to an anterior neck support. Four knifes are attached on the central arch of the cage. A drill guide cylinder is attached to the cage, thus allowing guide wire positioning as pre-operatively planned.</p> <p>Custom made devices were tested in 5 patients scheduled for total hip arthroplasty. The orthopedic surgeons reported the practical aspects of the use of the neck-jig device. The retrieved femoral heads were analyzed to assess the achieved drill place in mm deviation from the predefined location and orientation compared to the predefined orientation.</p> <p>Results</p> <p>The orthopedic surgeons rated the passive stability, full contact with neck portion of the jig and knife contact with femoral head, positive. There were no guide failures. The jig unique position and the number of steps required to put the guide in place were rated 1, while the complexity to put the guide into place was rated 1-2. In all five cases the guide wire was accurately positioned. Maximum angular deviation was 2.9° and maximum distance between insertion points was 2.1 mm.</p> <p>Conclusions</p> <p>Pilot testing of a custom made jig for use during SRA indicated that the device was (1) successfully applied and user friendly and (2) allowed for accurate guide wire placement according to the preoperative plan.</p