139 research outputs found
From 0D to 2D: Synthesis and bio-application of anisotropic magnetic iron oxide nanomaterials
Magnetic iron oxide nanoparticles (MIPs) have garnered significant scientific interest due to their magnetic properties and unique features, including low toxicity, colloidal stability, and surface engineering capability. Recent advances in nanoparticle synthesis have enabled the development of MIPs with precise control over their physicochemical properties, making them suitable for medical applications. Anisotropic MIPs have demonstrated shape-dependent performance in various bio-applications, leading to increased research moving from traditional zero-dimensional (0D) morphology towards one-dimensional (1D) and two-dimensional (2D) topology. While these anisotropic materials offer enhanced properties for specific applications, a critical and systematic comparison of their anisotropy effects is lacking in the literature. This review seeks to fill this current gap in the literature and provides a comprehensive summary of the last two decades of research on magnetic iron oxide materials with different shapes in biomedical applications. The paper will discuss the theoretical mechanisms of shape-dependent effects, primary synthetic approaches of 0D, 1D, and 2D MIP materials, biomedical applications, and biological behaviors. In addition, the review identifies critical challenges and open questions that need to be addressed. The proposed research directions outlined in this review have the potential to revitalize the use of āoldā MIPs towards future physicochemical and biomedical applications
Gadolinium Doped Layered Double Hydroxides for Simultaneous Drug Delivery and Magnetic Resonance Imaging
In this study, gadolinium (Gd) doped MgAl layered double hydroxides (LDHs) were synthesized via a ābottom-upā method and fully characterized by X-ray diffraction, infrared spectroscopy and relaxivity measurements. Two cytotoxic agents were then intercalated via ion-exchange. X-ray diffraction patterns exhibit expanded interlayer spacings as a result of successful drugĀ intercalation. Infrared spectra also showed characteristic peaks of the incorporated methotrexate (MTX) or 5-fluorouracil (5-FU). The LDHs were found to be highly stable under physiological conditions, while in acidic conditions a small proportion of Gd was freed into the immersion medium. Dissolution tests revealed that both 5FU and MTX were rapidly released from the LDH carrier. The longitudinal relaxivity of Gd-LDHs remains largely stable during drug release over 24Ā h, and was higher in acidic environments. Overall, the drug-loaded Gd-LDH systems prepared in this study could serve as pH-sensitive theranostic platforms for MRI-guided anti-cancer therapy.</p
Investigating the Impact of Cerium Oxide Nanoparticles Upon the Ecologically Significant Marine Cyanobacterium <i>Prochlorococcus</i>
Magnetically driven preparation of 1-D nano-necklaces capable of MRI relaxation enhancement
We report a novel magnetically-facilitated approach to produce 1-D
ānano-necklaceā arrays composed of 0-D magnetic nanoparticles,
which are assembled and coated with an oxide layer to produce semiflexible core@shell type structures. These ānano-necklacesā demonstrate good MRI relaxation properties despite their coating and
permanent alignment, with low field enhancement due to structural
and magnetocrystalline anisotropy
Layered terbium hydroxides for simultaneous drug delivery and imaging
Layered rare-earth hydroxides have begun to gather increasing attention as potential theranostic platforms owing to their extensive intercalation chemistry combined with magnetic and fluorescent properties. In this work, the potential of layered terbium hydroxide (LTbH) as a platform for simultaneous drug delivery and fluorescence imaging was evaluated. LTbH-Cl ([Tb2(OH)5]ClĀ·yH2O) was loaded with three nonsteroidal anti-inflammatory drugs (diclofenac, ibuprofen, and naproxen) via ion-exchange. Drug release studies in phosphate buffered saline (pH = 7.4) revealed all three formulations release their drug cargo rapidly over the course of approximately 5 hours. In addition, solid state fluorescence studies indicated that fluorescence intensity is strongly dependent on the identity of the guest anion. It was postulated that this feature may be used to track the extent of drug release from the formulation, which was subsequently successfully demonstrated for the ibuprofen loaded LTbH. Overall, LTbH exhibits good biocompatibility, high drug loading, and a strong, guest-dependent fluorescence signal, all of which are desirable qualities for theranostic applications
Layered rare-earth hydroxides as multi-modal medical imaging probes: particle size optimisation and compositional exploration
Recently, layered rare-earth hydroxides (LRHs) have received growing attention in the field of theranostics. We have previously reported the hydrothermal synthesis of layered terbium hydroxide (LTbH), which exhibited high biocompatibility, reversible uptake of a range of model drugs, and release-sensitive phosphorescence. Despite these favourable properties, LTbH particles produced by the reported method suffered from poor size-uniformity (670 Ā± 564 nm), and are thus not suitable for therapeutic applications. To ameliorate this issue, we first derive an optimised hydrothermal synthesis method to generate LTbH particles with a high degree of homogeneity and reproducibility, within a size range appropriate for in vivo applications (152 Ā± 59 nm, n = 6). Subsequently, we apply this optimised method to synthesise a selected range of LRH materials (R = Pr, Nd, Gd, Dy, Er, Yb), four of which produced particles with an average size under 200 nm (Pr, Nd, Gd, and Dy) without the need for further optimisation. Finally, we incorporate Gd and Tb into LRHs in varying molar ratios (1ā:ā3, 1ā:ā1, and 3ā:ā1) and assess the combined magnetic relaxivity and phosphorescence properties of the resultant LRH materials. The lead formulation, LGd1.41Tb0.59H, was demonstrated to significantly shorten the T2 relaxation time of water (r2 = 52.06 mMā1 sā1), in addition to exhibiting a strong phosphorescence signal (over twice that of the other LRH formulations, including previously reported LTbH), therefore holding great promise as a potential multi-modal medical imaging probe
Environmentally relevant concentrations of titanium dioxide nanoparticles pose negligible risk to marine microbes.
Nano-sized titanium dioxide (nTiO ) represents the highest produced nanomaterial by mass worldwide and, due to its prevalent industrial and commercial use, it inevitably reaches the natural environment. Previous work has revealed a negative impact of nTiO upon marine phytoplankton growth, however, studies are typically carried out at concentrations far exceeding those measured and predicted to occur in the environment currently. Here, a series of experiments were carried out to assess the effects of both research-grade nTiO and nTiO extracted from consumer products upon the marine dominant cyanobacterium, , and natural marine communities at environmentally relevant and supra-environmental concentrations ( , 1 Ī¼g L to 100 mg L ). Cell declines observed in cultures were associated with the extensive aggregation behaviour of nTiO in saline media and the subsequent entrapment of microbial cells. Hence, higher concentrations of nTiO particles exerted a stronger decline of cyanobacterial populations. However, within natural oligotrophic seawater, cultures were able to recover over time as the nanoparticles aggregated out of solution after 72 h. Subsequent shotgun proteomic analysis of cultures exposed to environmentally relevant concentrations confirmed minimal molecular features of toxicity, suggesting that direct physical effects are responsible for short-term microbial population decline. In an additional experiment, the diversity and structure of natural marine microbial communities showed negligible variations when exposed to environmentally relevant nTiO concentrations ( , 25 Ī¼g L ). As such, the environmental risk of nTiO towards marine microbial species appears low, however the potential for adverse effects in hotspots of contamination exists. In future, research must be extended to consider any effect of other components of nano-enabled product formulations upon nanomaterial fate and impact within the natural environment
Controlled synthesis of SPION@SiOā nanoparticles using design of experiments
The synthesis of single-core superparamagnetic iron oxide nanoparticles (SPIONs) coated with a silica shell of controlled thickness remains a challenge, due to the dependence on a multitude of experimental variables. Herein, we utilise design of experiment (DoE) to study the formation of SPION@SiO2 nanoparticles (NPs) via reverse microemulsion. Using a 33 full factorial design, the influence of reactant concentration of tetraethyl orthosilicate (TEOS) and ammonium hydroxide (NH4OH), as well as the number of fractionated additions of TEOS on the silica shell was investigated with the aim of minimising polydispersity and increasing the population of SPION@SiO2 NPs formed. This investigation facilitated a reproducible and controlled approach for the high yield synthesis of SPION@SiO2 NPs with uniform silica shell thickness. Application of a multiple linear regression analysis established a relationship between the applied experimental variables and the resulting silica shell thickness. These experimental variables were similarly found to dictate the monodispersity of the SPION@SiO2 NPs formed. The overall population of single-core@shell particles was dependent on the interaction between the number of moles of TEOS and NH4OH, with no influence from the number of fractionated additions of TEOS. This work demonstrates the complexity of the preparative method and produces an accessible and flexible synthetic model to achieve monodisperse SPION@SiO2 NPs with controllable shell thickness
- ā¦