Centrifuge mounted motion simulator Patent

Centrifuge mounted motion simulator with elevator mechanis

The Determination of the Effective Resistance of a Spindle Supporting a Model Airfoil

An attempt was made to determine the effect of spindle interference on the lift of the airfoil by measuring moments about the axis parallel to the direction of air flow. The values obtained are of the same degree as the experimental error, and for the present this effect will be neglected. The results obtained using a U.S.A. 15 wing (plotted here) show that the correction is nearly constant from 0 degrees to 10 degrees incidence and that at greater angles its value becomes erratic. At such angles, however, the wing drag is so high that the spindle correction and its attendant errors become relatively small and unimportant

The selection, appraisal and retention of digital scientific data: dighlights of an ERPANET/CODATA workshop

CODATA and ERPANET collaborated to convene an international archiving workshop on the selection, appraisal, and retention of digital scientific data, which was held on 15-17 December 2003 at the Biblioteca Nacional in Lisbon, Portugal. The workshop brought together more than 65 researchers, data and information managers, archivists, and librarians from 13 countries to discuss the issues involved in making critical decisions regarding the long-term preservation of the scientific record. One of the major aims for this workshop was to provide an international forum to exchange information about data archiving policies and practices across different scientific, institutional, and national contexts. Highlights from the workshop discussions are presented

Effect of cryogenic irradiation on NERVA structural alloys

Several alloys (Hastelloy X, AISI 347, A-286 bolts, Inconel 718, Al 7039-T63 and Ti-5Al-2.5Sn ELI) were irradiated in liquid nitrogen (140 R) to neutron fluences between 10 to the 17th power and 10 to the 19th power nvt (E greater than 1.0 Mev). After irradiation, tensile properties were obtained in liquid nitrogen without permitting any warmup except for some specimens which were annealed at 540 R. The usual trend of radiation damage typical for materials irradiated at and above room temperature was observed, such as an increase in strength and decrease in ductility. However, the damage at 140 R was greater because this temperature prevented the annealing of radiation-induced defects which occurs above 140 R

Independent Orbiter Assessment (IOA): Analysis of the hydraulics/water spray boiler subsystem

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items (PCIs). To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. This report documents the independent analysis results for the Orbiter Hydraulics/Water Spray Boiler Subsystem. The hydraulic system provides hydraulic power to gimbal the main engines, actuate the main engine propellant control valves, move the aerodynamic flight control surfaces, lower the landing gear, apply wheel brakes, steer the nosewheel, and dampen the external tank (ET) separation. Each hydraulic system has an associated water spray boiler which is used to cool the hydraulic fluid and APU lubricating oil. The IOA analysis process utilized available HYD/WSB hardware drawings, schematics and documents for defining hardware assemblies, components, and hardware items. Each level of hardware was evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the severity of the effect for each failure mode. Of the 430 failure modes analyzed, 166 were determined to be PCIs

Independent Orbiter Assessment (IOA): Assessment of the hydraulics/water spray boiler subsystem

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA effort first completed an analysis of the Hydraulics/Water Spray Boiler (HYD/WSB) hardware, generating draft failure modes and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The IOA results were then compared to the NASA FMEA/CIL baseline with proposed Post 51-L updates included. A resolution of each discrepancy from the comparison is provided through additional analysis as required. This report documents the results of that comparison for the Orbiter HYD/WSB hardware. The IOA product for the HYD/WSB analysis consisted of 447 failure mode worksheets that resulted in 183 potential critical items being identified. Comparison was made to the NASA baseline which consisted of 364 FMEAs and 111 CIL items. This comparison produced agreement on all but 68 FMEAs which caused differences in 23 CIL items

Echo spectroscopy of bulk Bogoliubov excitations in trapped Bose-Einstein condensates

We propose and demonstrate an echo method to reduce the inhomogeneous linewidth of Bogoliubov excitations, in a harmonically-trapped Bose-Einstein condensate. Our proposal includes the transfer of excitations with momentum +q to -q using a double two photon Bragg process, in which a substantial reduction of the inhomogeneous broadening is calculated. Furthermore, we predict an enhancement in the method's efficiency for low momentum due to many-body effects. The echo can also be implemented by using a four photon process, as is demonstrated experimentally.Comment: 4 pages, 5 figure

Transactional culture of the portfolio career chamber musician: A case study

The literature and case study data presented in this chapter explore the micro- (interpersonal) and macro-level (organisational/cultural) experiences between professional chamber musicians, the venues that engage them, and the audiences in attendance. They are explored in terms of a series of transactions—acts of giving and receiving and embracing the need to compromise. From this perspective, emergent themes include the delicate balancing of economic, esteem, and diversification values for both performers and venue in planning; music cohesion and interpersonal social interaction as important at all levels and across all stages of planning and executing performances; and considerations of the balance between familiar and novel encounters, informality, and experiences of social inclusion regarding interactions amongst performers and audience members. It is clear that both specific and subtle transactions shape the motivations, planning, and execution of ensemble performances. While stakeholders all inevitably have different and varied experiences, their transactions contribute to the virtuous cycle of the embedded environmental social, cultural, material, and technological factors and the action afforded that constitutes chamber music performance. The “art of ensemble performance” seems to be a distributed process that is dependent on critical interdependent transactions amongst all stakeholders