677 research outputs found
Backstreaming of Impurity Gas Through a Leak in Pressurized Vessel
The presence of a leak in a vessel containing pure gas can induce the contamination by atmospheric gas diffusing into the vessel. In order to avoid this, a gas which has to be kept pure also in presen ce of a leak is usually pressurized, to reduce the flow of contaminating gas through the leak owing to the molecular drag by the outstreaming pure gas. In this paper, a simple model calculation of ba ckstreaming based on the solution of the diffusion + drag equation in cylindrical coordinates is presented. It is shown that both the pressure difference and the dimension of the leak are critical in determining the contaminating flow, a maximum in the backstreaming flow appearing when the drag velocity of the outstreaming gas equals the diffusion velocity
Governing Global Supply Chain Sustainability Through the Ethical Audit Regime
Over the past two decades multinational corporations have been expanding âethicalâ audit programs with the stated aim of reducing the risk of sourcing from suppliers with poor practices. A wave of government regulationâsuch as the California Transparency in Supply Chains Act (2012) and the UK Modern Slavery Act (2015)âhas enhanced the legitimacy of auditing as a tool to govern labor and environmental standards in global supply chains, backed by a broad range of civil society actors championing audits as a way of promoting corporate accountability. The growing adoption of auditing as a governance tool is a puzzling trend, given two decades of evidence that audit programs generally fail to detect or correct labor and environmental problems in global supply chains. Drawing on original field research, this article shows that in spite of its growing legitimacy and traction among government and civil society actors, the audit regime continues to respond to and protect industry commercial interests. Conceptually, the article challenges prevailing characterizations of the audit regime as a technical, neutral, and benign tool of supply chain governance, and highlights its embeddedness in struggles over the legitimacy and effectiveness of the industry-led privatization of global governance
Technical Analysis and Statistics from Long Term Helium Cryoplant Operation with Experimental Superconducting Magnets at CERN
CERN regularly uses a large number of liquid helium cryoplants for cooling the superconducting magnets of large particle detectors. They are installed in the experimental areas of the electron-positron collider LEP and the proton (and heavy ion) accelerator SPS for the observation of high-energy interactions of elementary particles. The typical cold mass of a detector magnet ranges from 1 to 40 tons, and typical cryoplant cooling capacities are between 400 and 800 W/4.5 K entropy equivalent. Operation must be very flexible to meet the varying experimental requirements. We intend to present technical data of the system and statistics from over 180'000 running hours during the four years from 1992 to 1995. Operation includes phases of cool-down, steady-state cooling, recovery after magnet quench or other incidents and warm-up of the superconducting magnets. Emphasis will be laid on the analysis of fault conditions, multiple interaction between perturbations and consequences for the users of liquid helium supply interruption
Conclusions from 12 Years Operational Experience of the Cryoplants for the Superconducting Magnets of the LEP Experiments
The Large Electron Positron Collider (LEP) has ended its last physics run in November 2000, and it is at present being dismantled to liberate the tunnel for the Large Hadron Collider (LHC) project to be completed by end of 2005. The cryogenic systems for the superconducting solenoid and focusing quadrupoles for the two LEP experiments, ALEPH and DELPHI, each supplying a cooling power of 800 W/4.5 K entropy equivalent, have accumulated more then 100'000 hours of running time. The paper summarises the 12 years cryogenic experience in the various operating modes: cool-down, steady state, recovery after energy fast dump, utilities failures and warm-up of the superconducting magnets. The detailed operation statistics is presented and compared to the other CERN cryogenic systems. Emphasis is given to the technical analysis of the fault conditions and of their consequences on the helium refrigeration production time in view of the future operation of the LHC cryogenics
The cryogenic system for the superconducting solenoid magnet of the CMS experiment
The design concept of the CMS experiment, foreseen for the Large Hadron Collider (LHC) project at CERN, is based on a superconducting solenoid magnet. The large coil will be made of a four layers winding generating the 4 T uniform magnetic induction required by the detector. The length of the solenoid is 13 m with an inner diameter of 5.9 m. The mass kept at liquid helium temperature totals 220 t and the electromagnetic stored energy is 2.7 GJ. The windings are indirectly cooled with a liquid helium flow driven by a thermosyphon effect. The external cryogenic system consists of a 1.5 kW at 4.5 K (entropy equivalent) cryoplant including an additional liquid nitrogen precooling unit and a 5000 litre liquid helium buffer. The whole magnet and cryogenic system will be tested at the surface by 2003 before final installation in the underground area of LHC
New Long-term Historical Data Recording and Failure Analysis System for the CERN Cryoplants
CERN uses several liquid helium cryoplants (total of 21) for cooling large variety of superconducting devices namely: accelerating cavities, magnets for accelerators and particle detectors. The cryoplants are remotely operated from several control rooms using industrial standard supervision systems, which allows the instant display of all plant data and the trends, over several days, for the most important signals. The monitoring of the cryoplant performance during transient conditions and normal operation over several months asks for a long-term recording of all plant parameters. An historical data recording system has been developed, which collects data from all cryoplants, stores them in a centralized database over a period of one year and allows an user-friendly graphical visualization. In particular, a novel tool was developed for debugging causes of plant failures by comparing selected reference data with the simultaneous evolution of all plant data. The paper describes the new system, already in operation with 11 cryoplants
Cryogenic Facilities at 1.9 K for the Reception of the Superconducting Wires and Cables of the LHC Dipoles Magnets
CERN's LHC project has moved to an implementation phase. The fabrication of 1600 high-field superconducting magnets operating at 1.9 K will require about 6400 km of Nb-Ti cables. A cryogenic test facility has therefore been set up in order, on the one hand, to verify the quality of individual wires and, on the other hand, to control the critical current of the assembled cables. The facility is composed of a helium liquefier, a transfer line, a dewar and pumps. The paper describes the fully automatic operation of this installation and the different test cycles applied to these wires and cables
Refrigeration System for the ATLAS Experiment
The proposed ATLAS detector for the 27 km circumference LHC collider is of unprecedented size and complexity. The magnet configuration is based on an inner superconducting solenoid and large superconducting air-core toroids (barrel and two end-caps) each made of eight coils symmetrically arranged outside the calorimetry. The total cold mass approaches 600 tons and the stored energy is 1.7Â GJ. The cryogenic infrastructure will include a 6Â kW @ 4.5Â K refrigerator, a precooling unit and distribution systems and permits flexible operation during cool-down, normal running and quench recovery. A dedicated LN2 refrigeration system is proposed for the three liquid argon calorimeters (84 m3 of LAr). Magnets and calorimeters will be individually tested prior to their definitive installation in a large scale cryogenic test area on the surface. The experiment is scheduled to be operational in 2005
New cryogenic facilities for testing superconducting equipments for the CERN Large Hadron Collider
CERN's major project, the Large Hadron Collider (LHC), has moved to an implementation phase with machine construction to be completed by 2005. To achieve the design proton-proton centre of mass energy of 14 TeV in the given 27 km circumference LEP tunnel, the LHC will make an extensive use of high-field superconducting magnets using Nb-Ti filament operated at 1.9 K. In order to test, on the one han d, the superconducting cables of the magnets and, on the other hand, the expected performance of several of these magnets assembled in a string representing the lattice period of the machine (107 m lo ng), CERN has installed new cryogenic test facilities. The paper briefly describes these new facilities with all their associated equipments
- âŠ