1,910 research outputs found
Force and cavitation characteristics of the NACA 4412 hydrofoil
This report covers Water Tunnel measurements of the infinite aspect ratio characteristics and cavitation characteristics of a hydrofoil section. The profile tested is identical to the 4412 airfoil section of the National Advisory Committee for Aeronautics and is called the NACA 4412 hydrofoil in this report. Measurements and observations include lift, drag, and pitching moment and the inception and development of cavitation as functions of the angle of attack, velocity, and pressure of the flow. The purpose of this report is to present these measurements of the characteristics of this section in water, to compare the results with other available information on this shape, and to evaluate the Water Tunnel method for obtaining the complte hydrodynamic characteristics of hydrofoils
A study of ignition phenomena of bulk metals by radiant heating
Early research on combustion of metals was motivated by the knowledge of the large heat release and corresponding high temperatures associated with metal-oxygen reactions. The advent of space flight brought about an increased interest in the ignition and combustion of metallic particles as additives in solid rocket propellants. More recently, attention has been given to the flammability properties of bulk, structural metals due to the number of accidental explosions of metal components in high-pressure oxygen systems. The following work represents a preliminary study that is part of a broader research effort aimed at providing further insight into the phenomena of bulk metal combustion by looking at the effects of gravity on the ignition behavior of metals. The scope of this preliminary experimental study includes the use of a non-coherent, continuous radiation ignition source, the measurement of temperature profiles of a variety of metals and a qualitative observation of the ignition phenomena at normal gravity. The specific objectives of the investigation include: (1) a feasibility study of the use of a continuous radiation source for metal ignition; (2) testing and characterization of the ignition behavior of a variety of metals; and (3) building a preliminary experimental database on ignition of metals under normal gravity conditions
Application of multispectral radar and LANDSAT imagery to geologic mapping in death valley
Side-Looking Airborne Radar (SLAR) images, acquired by JPL and Strategic Air Command Systems, and visible and near-infrared LANDSAT imagery were applied to studies of the Quaternary alluvial and evaporite deposits in Death Valley, California. Unprocessed radar imagery revealed considerable variation in microwave backscatter, generally correlated with surface roughness. For Death Valley, LANDSAT imagery is of limited value in discriminating the Quaternary units except for alluvial units distinguishable by presence or absence of desert varnish or evaporite units whose extremely rough surfaces are strongly shadowed. In contrast, radar returns are most strongly dependent on surface roughness, a property more strongly correlated with surficial geology than is surface chemistry
Cavitation Noise from Underwater Projectiles
This report describes measurements of high frequency noise produced by projectiles cavitating in a high velocity stream of water. Spherical and ellipsoidal focusing reflectors were used in conjunction with a Brush CC-11A hydrophone to locate the noise source
The homestake surface-underground scintillations: Description
Two new detectors are currently under construction at the Homestake Gold Mine a 140-ton Large Area Scintillation Detector (LASD) with an upper surface area of 130 square meters, a geometry factor (for an isotropic flux) of 1200 square meters, sr, and a depth of 4200 m.w.e.; and a surface air shower array consisting of 100 scintillator elements, each 3 square meters, spanning an area of approximately square kilometers. Underground, half of the LASD is currently running and collecting muon data; on the surface, the first section of the air shower array will begin operation in the spring of 1985. The detectors and their capabilities are described
Discussion of "Test Characteristics of a Combined Pump-Turbine Model with Wicket Gates"
[no abstract
The high speed water tunnel at the California Institute of Technology
The high speed water tunnel was established at the California Institute of Technology to study the forces acting upon moving bodies immersed in a fluid. The working section of the tunnel is 14 inches in diameter
and 6 feet long and velocities up to 72 feet per second are obtained in it. The model to be tested is mounted on the spindle of a three component balance which measures the drag force, the yaw or lateral force and the moment
about the spindle support. The angle of inclination of the model to the flow direction can be adjusted easily. From these measurements are determined the magnitude and location of the resultant forces acting on the model.
In order to study cavitation, the pressure in the tunnel is made adjustable and a transparent working section is provided for visual and photographic observations.
For qualitative assistance in interpreting the results of the tunnel studies in terms of the effects of the body shapes on the flow pattern, an auxiliary flume is available. The flow is made visible by use of a new technique employing polarized light
Radar Imaging of Volcanic Fields and Sand Dune Fields: Implications for VOIR
A number of volcanic fields and sand dune fields in the western part of North America were studied using aircraft and Seasat synthetic aperture radar images and LANDSAT images. The capability of radars with different characteristics (i.e., frequency, polarization and look angles was assessed to identify and map different volcanic features, lava flows and sand dune types. It was concluded that: (1) volcanic features which have a relatively large topographic expression (i.e., cinder cones, collapse craters, calderas, etc.) are easily identified; (2) lava flows of different ages can be identified, particularly on the L-band images; and (3) sand dunes are clearly observed and their extent and large scale geometric characteristics determined, provided the proper imaging geometry exists
- …