26,141 research outputs found
Rate Splitting for MIMO Wireless Networks: A Promising PHY-Layer Strategy for LTE Evolution
MIMO processing plays a central part towards the recent increase in spectral
and energy efficiencies of wireless networks. MIMO has grown beyond the
original point-to-point channel and nowadays refers to a diverse range of
centralized and distributed deployments. The fundamental bottleneck towards
enormous spectral and energy efficiency benefits in multiuser MIMO networks
lies in a huge demand for accurate channel state information at the transmitter
(CSIT). This has become increasingly difficult to satisfy due to the increasing
number of antennas and access points in next generation wireless networks
relying on dense heterogeneous networks and transmitters equipped with a large
number of antennas. CSIT inaccuracy results in a multi-user interference
problem that is the primary bottleneck of MIMO wireless networks. Looking
backward, the problem has been to strive to apply techniques designed for
perfect CSIT to scenarios with imperfect CSIT. In this paper, we depart from
this conventional approach and introduce the readers to a promising strategy
based on rate-splitting. Rate-splitting relies on the transmission of common
and private messages and is shown to provide significant benefits in terms of
spectral and energy efficiencies, reliability and CSI feedback overhead
reduction over conventional strategies used in LTE-A and exclusively relying on
private message transmissions. Open problems, impact on standard specifications
and operational challenges are also discussed.Comment: accepted to IEEE Communication Magazine, special issue on LTE
Evolutio
: An Excellent Candidate of Tetraquarks
We analyze various possible interpretations of the narrow state
which lies 100 MeV above threshold. This interesting state
decays mainly into instead of . If this relative branching
ratio is further confirmed by other experimental groups, we point out that the
identification of either as a state or more generally
as a state in the representation is probably
problematic. Instead, such an anomalous decay pattern strongly indicates
is a four quark state in the representation
with the quark content . We discuss its
partners in the same multiplet, and the similar four-quark states composed of a
bottom quark . Experimental searches of other members
especially those exotic ones are strongly called for
Recommended from our members
An experimental study on heat transfer and pressure drop of MTHE
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.A micro-sized shell and tube heat exchanger (MTHE) was fabricated, and its performance in heat transfer and pressure drop was experimentally studied. The single-phase forced convection heat transfer correlation in the tube side of the MTHE was proposed and compared with previous experimental data in the Reynolds number range of 500-1800. The averaged deviation of the correlation in calculating the Nusselt numbers is about 6.59%. The entrance effect in the thermal developing region was discussed in detail. In the same range of Reynolds number the pressure drop and friction coefficients were found to be considerably higher than those predicted by the conventional correlations. The product of friction factor and Reynolds number is also a constant, but about one fold higher than the conventional. The reasons resulting in these physical phenomena have been preliminary discussed.Tianjin Science and Technology Committee Key
Project fund, under Grant No. 08JCZDC203
Recommended from our members
On the influence of tube row number for mixed convection around micro tubes
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.A numerical simulation was performed on the heat transfer of mixed convection for fluid flowing across a micro-tube bundle by using Lattice Boltzmann Method. Firstly, the program code was validated by using a bench mark case of natural convection around a hot single tube inside a square enclosure. The local and averaged heat transfer coefficient of each tube in the bundle with various row numbers was calculated. Numerous cases have been simulated from a weak natural convection case (forced convection) to a pure natural convection case. The results indicate that the total averaged Nusselt number outside the tubes gradually decreases and becomes almost a constant with tube row number at low Reynolds number, which is different from the case of conventional scaled tube. The averaged Nusselt numbers and temperature fields for various situations were compared. The other influencing factors except of the tube row number on the heat transfer behavior of a tube bundle were also summarized and discussed.Tianjin Science and Technology Committee Key Project fund, under Grant No. 08JCZDC20300 and NSF of China under grant No. 4097216
Hyperaccretion Disks around Neutron Stars
(Abridged) We here study the structure of a hyperaccretion disk around a
neutron star. We consider a steady-state hyperaccretion disk around a neutron
star, and as a reasonable approximation, divide the disk into two regions,
which are called inner and outer disks. The outer disk is similar to that of a
black hole and the inner disk has a self-similar structure. In order to study
physical properties of the entire disk clearly, we first adopt a simple model,
in which some microphysical processes in the disk are simplified, following
Popham et al. and Narayan et al. Based on these simplifications, we
analytically and numerically investigate the size of the inner disk, the
efficiency of neutrino cooling, and the radial distributions of the disk
density, temperature and pressure. We see that, compared with the black-hole
disk, the neutron star disk can cool more efficiently and produce a much higher
neutrino luminosity. Finally, we consider an elaborate model with more physical
considerations about the thermodynamics and microphysics in the neutron star
disk (as recently developed in studying the neutrino-cooled disk of a black
hole), and compare this elaborate model with our simple model. We find that
most of the results from these two models are basically consistent with each
other.Comment: 44 pages, 10 figures, improved version following the referees'
comments, main conclusions unchanged, accepted for publication in Ap
Two-Dimensional Inversion Asymmetric Topological Insulators in Functionalized III-Bi Bilayers
The search for inversion asymmetric topological insulators (IATIs) persists
as an effect for realizing new topological phenomena. However, so for only a
few IATIs have been discovered and there is no IATI exhibiting a large band gap
exceeding 0.6 eV. Using first-principles calculations, we predict a series of
new IATIs in saturated Group III-Bi bilayers. We show that all these IATIs
preserve extraordinary large bulk band gaps which are well above
room-temperature, allowing for viable applications in room-temperature
spintronic devices. More importantly, most of these systems display large bulk
band gaps that far exceed 0.6 eV and, part of them even are up to ~1 eV, which
are larger than any IATIs ever reported. The nontrivial topological situation
in these systems is confirmed by the identified band inversion of the band
structures and an explicit demonstration of the topological edge states.
Interestingly, the nontrivial band order characteristics are intrinsic to most
of these materials and are not subject to spin-orbit coupling. Owning to their
asymmetric structures, remarkable Rashba spin splitting is produced in both the
valence and conduction bands of these systems. These predictions strongly
revive these new systems as excellent candidates for IATI-based novel
applications.Comment: 17 pages,5figure
High energy neutrinos from magnetars
Magnetars can accelerate cosmic rays to high energies through the unipolar
effect, and are also copious soft photon emitters. We show that young,
fast-rotating magnetars whose spin and magnetic moment point in opposite
directions emit high energy neutrinos from their polar caps through photomeson
interactions. We identify a neutrino cut-off band in the magnetar
period-magnetic field strength phase diagram, corresponding to the photomeson
interaction threshold. Within uncertainties, we point out four possible
neutrino emission candidates among the currently known magnetars, the brightest
of which may be detectable for a chance on-beam alignment. Young magnetars in
the universe would also contribute to a weak diffuse neutrino background, whose
detectability is marginal, depending on the typical neutrino energy.Comment: emulateapj style, 6 pages, 1 figure, ApJ, v595, in press. Important
contributions from Dr. Harding added. Major revisions made. More conservative
and realistic estimates about the neutrino threshold condition and emission
efficiency performed. More realistic typical beaming angle and magnetar birth
rate adopte
- …