203 research outputs found
Particle tracking in the ILC extraction lines with DIMAD and BDSIM
The study of beam transport is of central importance to the design and
performance assessment of modern particle accelerators. In this paper, we
benchmark two contemporary codes, DIMAD and BDSIM, the latter being a
relatively new tracking code built within the framework of GEANT4. We consider
both the 20 mrad and 2 mrad extraction lines of the 500 GeV International
Linear Collider (ILC) and we perform particle tracking studies of heavily
disrupted post-collision electron beams. We find that the two codes give an
almost equivalent description of the beam transport
Benchmarking of Tracking Codes (BDSIM/DIMAD) using the ILC Extraction Lines
The study of beam transport is of central importance to the design and
performance assessment of modern particle accelerators. In this work, we
benchmark two contemporary codes - DIMAD and BDSIM, the latter being a
relatively new tracking code built within the framework of GEANT4. We consider
both the 20 mrad and 2 mrad extraction lines of the International Linear
Collider (ILC) and we perform tracking studies of heavily disrupted
post-collision electron beams. We find that the two codes mostly give an
equivalent description of the beam transport.Comment: Contribution to the Tenth European Particle Accelerator Conference
`"EPAC'06'', Edinburgh, United-Kingdom, 26-30 June 200
Backscattering of secondary particles into the ILC detectors from beam losses along the extraction line
online : http://cern.ch/AccelConf/p07/PAPERS/THPMN009.PDFInternational audienceAt the International Linear Collider (ILC) the beams will be focused to extremely small spot sizes in order to achieve the desired luminosity. After the collision the beams must be brought to the dump with minimal losses. In spite of all the attention put into the design of the extraction line, the loss of some disrupted beam particles, beamstrahlung or synchrotron radiation photons is unavoidable. These losses will generate low-energy secondary particles, such as photons, electrons and neutron, a fraction of which can be back-scattered towards the Interaction Point (IP) and generate backgrounds into the detector. In this paper we present an evaluation of such backgrounds, using the BDSIM [1] and Mokka [2] simulations. The event reconstruction in the detector is made with the MarlinReco package from the Marlin tool [3]
Optimization of the e-e- option for the ILC
The e-e- running mode is one of the interesting physics options at the
International Linear Collider (ILC). The luminosity for e-e- collisions is
reduced by the beam-beam effects. The resulting beamstrahlung energy loss and
beam-beam deflection angles as function of the vertical transverse offset are
different compared to the e+e- collisions. In this paper, the dependence of
these observables with the offset for different beam sizes has been analyzed to
optimize performances for the e-e- mode, taking into account the requirements
of the beam-beam deflection based intra-train feedback system. A first study of
the implications for the final focus and extraction line optics is also
presented for the cases of the 20 mrad and 2 mrad ILC base line crossing angle
geometries
Polarized Positron Source with a Compton Multiple Interaction Point Line
ISBN 978-3-95450-115-1International audiencePositron sources are critical components of the future lepton colliders projects. This is essentially due to the high luminosity required, orders of magnitude higher than existing ones. In addition,polarization of the positron beam rather expands the physics research potential of the machine by increasing the precision of the measurements and enhancing certain types of interactions. In this framework, the Compton sources for polarized positron production are taken into account where the high energy gamma rays are produced by the Compton scattering and subsequently converted in the polarized electron-positron pairs in a target. The Compton multiple IPs line is proposed as one of the solutions to increase the number of captured positrons. This allows a signiïŹcant increase in the emitted gamma ray ïŹux impinging on the target. The gamma ray production with the Compton multiple IPs line is simulated and used for polarized positron generation. Later, a capture section based on an adiabatic matching device followed by a pre-injector linac is simulated to capture and accelerate the positron beam. The results obtained are presented and discussed
Update on the Status of BDSIM
International audienceRecent updates to the status of the BDSIM particle tracking code are presented. In particular, we describe eïŹorts to combine the secondary particle generation of BDSIM with the wakeïŹeld calculations of Placet in order to quantify backgrounds from col- limating elements in the beam delivery system of the International Linear Collider. Further recent updates to BDSIM are also introduced
Evaluation of Luminosity Reduction in the ILC Head-on Scheme from Parasitic Collisions
online : http://cern.ch/AccelConf/p07/PAPERS/THPMN008.PDFInternational audienceAn interaction region with head-on collisions is being developed for the ILC as an alternative to the base line 14 mrad crossing angle design, motivated by simpler beam manipulations upstream of the interaction point (IP) and a more favourable configuration for the detector and physics analysis. The design of the post-collision beam line in this scheme involves however a number of technological challenges, one of which is the strength requirement for the electrostatic separators (ES) placed immediately after the final doublet to extract the spent beam. In this paper, we examine in detail the main mechanism behind this requirement, the multi-beam kink instability, which results from the long-range beam-beam forces at the parasitic crossings after the bunches have been extracted. Our analysis uses realistic bunch distributions, the Guinea-Pig program to treat beam-beam effects at the interaction point and the DIMAD program to track the disrupted beam distributions in the postcollision beam line
GUINEA-PIG++ : an upgraded version of the linear collider beam-beam interaction simulation code GUINEA-PIG
http://cern.ch/AccelConf/p07/PAPERS/THPMN010.PDFInternational audienceGUINEA-PIG++ is a newly developed object-oriented version of the Linear Collider beam-beam simulation program GUINEA-PIG. The main goals of this project are to provide an reliable, modular, documented and versatile framework enabling convenient implementation of new features and functionalities
Positron Production and Capture based on Low Energy Electrons for SuperB
TUPEB057International audienceProviding a high quality and sufficient high current positron beam for the ultra high luminosity B-factory SuperB is a major goal. In this paper a proposition for positrons production and capture scheme based on low energy electrons up to1 GeV is presented. For this technique, several types of flux concentrator used to capture the positrons are being studied. The following accelerating section bringing the positrons up to 280 MeV and the total yield for L-band and S-band type accelerators are given. Also the result of the benchmark between ASTRA and a LAL code based on Geant4 toolkit simulation is discussed
A positron source using an axially oriented crystal associated to a granular amorphous converter
Submitted to Chinese Physics CA non conventional positron source using the intense Îł radiation from an axially oriented monocrystal which materialize into e+e- pairs in a granular amorphous converter is described. The enhancement of photon radiation by multi-GeV electrons crossing a tungsten crystal along its axis is reported. The resulting enhancement of pair production in an amorphous converter placed 2 meters downstream, is also reported. Sweeping off the charged particles from the crystal by a bending magnet upstream of the converter allows a significant reduction of the deposited energy density. Substituting a granular target made of small spheres to the usual compact one, makes easier the energy dissipation. The deposited energy and corresponding heating are analyzed and solutions for cooling are proposed. The configurations studied here for this kind of positron source allow its consideration for unpolarized positrons for the ILC
- âŠ