34 research outputs found
DEVELOPMENT OF A FAST MICRON-RESOLUTION BEAM POSITION MONITOR SIGNAL PROCESSOR FOR LINEAR COLLIDER BEAMBASED FEEDBACK SYSTEMS
We present the design of a prototype fast beam position monitor (BPM) signal processor for use in inter-bunch beam-based feedbacks for linear colliders and electron linacs. We describe the FONT4 intra-train beam-based digital position feedback system prototype deployed at the Accelerator test facility (ATF) extraction line at KEK, Japan. The system incorporates a fast analogue beam position monitor front-end signal processor, a digital feedback board, and a fast kicker-driver amplifier. The total feedback system latency is less than 150ns, of which less than 10ns is used for the BPM processor. We report preliminary results of beam tests using electron bunches separated by c. 150ns. Position resolution of order 1 micron was obtained
BEAM TEST RESULTS WITH THE FONT4 ILC PROTOTYPE INTRA-TRAIN BEAM FEEDBACK SYSTEM
We present the design and beam test results of a prototype beam-based digital feedback system for the Interaction Point of the International Linear Collider. A custom analogue front-end processor, FPGA-based digital signal processing board, and kicker drive amplifier have been designed, built, and tested on the extraction line of the KEK Accelerator Test Facility (ATF). The system was measured to have a latency of approximately 140 ns
Latest Beam Test Results of the FONT4 ILC Intra-train Feedback System Prototype
We present the design and preliminary results of a prototype beam-based
digital feedback system for the Interaction Point of the International Linear
Collider. A custom analogue front-end processor, FPGA-based digital signal
processing board, and kicker drive amplifier have been designed, built, and
tested on the extraction line of the KEK Accelerator Test Facility (ATF). The
system was measured to have a latency of approximately 140 ns.Comment: 4 pages, 6 figures, Proceedings of LCWS/ILC0
Recommended from our members
Design of the ILC Prototype FONT4 Digital Intra-Train Beam-Based Feedback System
We present the design of the FONT4 digital intra-train beam position feedback system prototype and preliminary results of initial beam tests at the Accelerator Test Facility (ATF) at KEK. The feedback system incorporates a fast analogue beam position monitor (BPM) front-end signal processor, a digital feedback board, and a kicker driver amplifier. The short bunchtrain, comprising 3 electron bunches separated by c. 150ns, in the ATF extraction line was used to test components of the prototype feedback system
Recommended from our members
Performance of the FONT3 Fast Analogue Intra-Train Beam-Based Feedback System at ATF
We report results of beam tests of the FONT3 intra-train position feedback system prototype at the Accelerator Test Facility (ATF) at KEK. The feedback system incorporates a novel beam position monitor (BPM) processor with latency below 5 nanoseconds, and a kicker driver amplifier with similar low latency. The 56 nanosecond-long bunchtrain in the ATF extraction line was used to test the prototype feedback system. The achieved latency of 23ns provides a demonstration of intra-train feedback on very short timescales relevant even for the CLIC Linear Collider design
Development of a fast, single-pass, micron-resolution beam position monitor signal processor: Beam test results from ATF2
We present the design of a stripline beam position monitor (BPM) signal processor with low latency (c. 10ns) and micron-level spatial resolution in single-pass mode. Such a BPM processor has applications in singlepass beamlines such as those at linear colliders and FELs. The processor was deployed and tested at the Accelerator Test Facility (ATF2) extraction line at KEK, Japan. We report the beam test results and processor performance, including response, linearity, spatial resolution and latency