Preliminary error budget analysis of the coronagraphic instrument metis for the solar orbiter ESA mission

METIS, the Multi Element Telescope for Imaging and Spectroscopy, is the solar coronagraph foreseen for the ESA Solar Orbiter mission. METIS is conceived to image the solar corona from a near-Sun orbit in three different spectral bands: in the HeII EUV narrow band at 30.4 nm, in the HI UV narrow band at 121.6 nm, and in the polarized visible light band (590 – 650 nm). It also incorporates the capability of multi-slit spectroscopy of the corona in the UV/EUV range at different heliocentric heights. METIS is an externally occulted coronagraph which adopts an “inverted occulted” configuration. The Inverted external occulter (IEO) is a small circular aperture at the METIS entrance; the Sun-disk light is rejected by a spherical mirror M0 through the same aperture, while the coronal light is collected by two annular mirrors M1-M2 realizing a Gregorian telescope. To allocate the spectroscopic part, one portion of the M2 is covered by a grating (i.e. approximately 1/8 of the solar corona will not be imaged). This paper presents the error budget analysis for this newconcept coronagraph configuration, which incorporates 3 different sub-channels: UV and EUV imaging sub-channel, in which the UV and EUV light paths have in common the detector and all of the optical elements but a filter, the polarimetric visible light sub-channel which, after the telescope optics, has a dedicated relay optics and a polarizing unit, and the spectroscopic sub-channel, which shares the filters and the detector with the UV-EUV imaging one, but includes a grating instead of the secondary mirror. The tolerance analysis of such an instrument is quite complex: in fact not only the optical performance for the 3 sub-channels has to be maintained simultaneously, but also the positions of M0 and of the occulters (IEO, internal occulter and Lyot stop), which guarantee the optimal disk light suppression, have to be taken into account as tolerancing parameters. In the aim of assuring the scientific requirements are optimally fulfilled for all the sub-channels, the preliminary results of manufacturing, alignment and stability tolerance analysis for the whole instrument will be described and discussed

BC-SIM-TR-003 - STC NECP Report

The present document has been issued with the aim of describing the NECP (Near Earth Commissioning Phase) Tests of STC the Stereo Camera part of SIMBIO-SYS instrument, payload of the BepiColombo mission

Observing Mercury: from Galileo to the stereo camera on the BepiColombo mission

AbstractAfter having observed the planets from his house in Padova using his telescope, in January 1611 Galileo wrote to Giuliano de Medici that Venus is moving around the Sun as Mercury. Forty years ago, Giuseppe Colombo, professor of Celestial Mechanics in Padova, made a decisive step to clarify the rotational period of Mercury. Today, scientists and engineers of the Astronomical Observatory of Padova and of the University of Padova, reunited in the Center for Space Studies and Activities (CISAS) named after Giuseppe Colombo, are busy to realize a stereo camera (STC) that will be on board the European (ESA) and Japanese (JAXA) space mission BepiColombo, devoted to the observation and exploration of the innermost planet. This paper will describe the stereo camera, which is one of the channels of the SIMBIOSYS instrument, aiming to produce the global mapping of the surface with 3D images

Design of an afocal telescope for the ARIEL mission

ARIEL (Atmospheric Remote-sensing Infrared Exoplanet Large-survey) is one of the three candidates for the next ESA medium-class science mission (M4) expected to be launched in 2026. This mission will be devoted to observe spectroscopically in the infrared (IR) a large population of known transiting planets in our Galaxy. ARIEL is based on a 1-m class telescope ahead of two spectrometer channels covering the band 1.95 to 7.8 microns. In addition there are four photometric channels: two wide band, also used as fine guidance sensors, and two narrow band. During its 3.5 years operations from L2 orbit, ARIEL will continuously observe exoplanets transiting their host star. The ARIEL design is conceived as a fore-module common afocal telescope that will feed the spectrometer and photometric channels. The telescope optical design is an off-axis portion of a two-mirror classic telescope coupled to a tertiary off-axis paraboloidal mirror providing a collimating output beam. The telescope and optical bench operating temperatures, as well as those of some subsystems, will be monitored and fine tuned/stabilised mainly by means of a thermal control subsystem (TCU - Telescope Control Unit) working in closed-loop feedback and hosted by the main Payload electronics unit, i.e. the Instrument Control Unit (ICU). In this paper the telescope requirements will be given together with the foreseen design. The technical solution chosen to passively cool the telescope unit will be detailed discussed

Alignment procedure for detector integration and characterization of the CaSSIS instrument onboard the TGO mission

The Colour and Stereo Surface Imaging System (CaSSIS) is a high-resolution camera for the ESA ExoMars Trace Gas Orbiter mission launched in March 2016. CaSSIS is capable of acquiring color stereo images of features on the surface of Mars to better understand the processes related to trace gas emission. The optical configuration of CaSSIS is based on a three-mirror anastigmatic off-axis imager with a relay mirror; to attain telecentric features and to maintain compact the design, the relay mirror has power. The University of Bern had the task of detector integration and characterization of CaSSIS focal plane. An OGSE (Optical Ground Support Equipment) characterization facility was set up for this purpose. A pinhole, imaged through an off-axis paraboloidal mirror, is used to produce a collimated beam. In this work, the procedures to align the OGSE and to link together the positions of each optical element will be presented. A global Reference System (RS) has been defined using an optical cube placed on the optical bench (OB) and linked to gravity through its X component; this global RS is used to correlate the alignment of the optical components. The main steps to characterize the position of the object to that of the CaSSIS focal plane have been repeated to guide and to verify the operations performed during the alignment procedures. A calculation system has been designed to work on the optical setup and on the detector simultaneously, and to compute online the new position of the focus plane with respect to the detector. Final results will be shown and discussed. <P /

STC Observation strategy report

This document contains all the information and concepts necessary to define an observation strategy for STC, the stereocamera channel of SIMBIOSYS, and plan its observations. It first describes the constraints derived from the orbit of Mercury, the planning of BepiColombo mission, and the design of STC detector; then the possibilities offered by the software commanding the instrument are presented. Building on these constraints and possibilities, an observation strategy based on a “segmented orbit” concept is presented and illustrated with some practical examples

The afocal telescope of the ESA ARIEL mission: analysis of the layout

ARIEL (Atmospheric Remote-sensing Infrared Exoplanet Large-survey) is one of the three present candidates as an M4 ESA mission to be launched in 2026. During its foreseen 3.5 years operation, it will observe spectroscopically in the infrared a large population of known transiting planets in the neighborhood of the Solar System. The aim is to enable a deep understanding of the physics and chemistry of these exoplanets. ARIEL is based on a 1-m class telescope ahead of a suite of instruments: two spectrometer channels covering the band 1.95 to 7.8 μm and four photometric channels (two wide and two narrow band) in the range 0.5 to 1.9 μm. The ARIEL optical design is conceived as a fore-module common afocal telescope that will feed the spectrometer and photometric channels. The telescope optical design is based on an eccentric pupil two-mirror classic Cassegrain configuration coupled to a tertiary paraboloidal mirror. The temperature of the primary mirror (M1) will be monitored and finely tuned by means of an active thermal control system based on thermistors and heaters. They will be switched on and off to maintain the M1 temperature within ±1 K thanks to a proportional-integral-derivative (PID) controller implemented within the Telescope Control Unit (TCU), a Payload electronics subsystem mainly in charge of the active thermal control of the two detectors owning to the spectrometer. TCU will collect the housekeeping data of the controlled subsystems and will forward them to the spacecraft (S/C) by means of the Instrument Control Unit (ICU), the main Payload's electronic Unit linked to the S/C On Board Computer (OBC)

The IFAE/UAB Raman LIDAR for the CTA-North

The IFAE/UAB Raman LIDAR project aims to develop a Raman LIDAR suitable for the online atmospheric calibration of the CTA. Requirements for such a solution include the ability to characterize aerosol extinction to distances of more than 20 km with an accuracy better than 5%, within time scales of less than one minute. The Raman LIDAR consists therefore of a large 1.8 m mirror and a powerful pulsed Nd-YAG laser. A liquid light-guide collects the light at the focal plane and transports it to the readout system. An in-house built polychromator has been characterized thoroughly with respect to its capability to separate efficiently the different wavelengths (355 nm, 387 nm, 532 nm and 607 nm). It was found to operate according to specifications, particularly that light leakage from the elastic channels (532 nm and 355 nm) into the much dimmer Raman channels (387 nm and 607 nm) could be excluded to less than 2 x 10(-7). We present here the status of the integration and commissioning of this solution and plans for the near future. After a one-year test period at the Observatorio del Roque de los Muchachos, an in-depth evaluation of this and the solutions adopted by a similar project developed by the LUPM, Montpellier, will lead to a final Raman LIDAR proposed to be built for both CTA sites

The afocal telescope optical design and tolerance analysis for the ESA ARIEL mission

ARIEL (Atmospheric Remote-sensing Infrared Exoplanet Large-survey) is one of the three present candidates for the next ESA medium-class science mission (M4) to be launched in 2026. During its 3.5 years of scientific operations from L2 orbit, this mission will observe spectroscopically in the infrared (IR) a large population of known transiting planets in the neighbourhood of the Solar System. The aim is to enable a deep understanding of the physics and chemistry of these exoplanets. ARIEL is based on a 1-m class telescope ahead of a suite of instruments: two spectrometer channels covering the band 1.95 to 7.80 µm and four photometric channels (two wide and two narrow band) in the range 0.5 to 1.9 μm. The ARIEL optical design is conceived as a fore-module common afocal telescope that will feed the spectrometer and photometric channels. The telescope optical design is based on an eccentric pupil two-mirror classic Cassegrain configuration coupled to a tertiary paraboloidal mirror. An all-aluminum structure has been considered for the telescope layout, and a detailed tolerance analysis has been conducted to assess the telescope feasibility. This analysis has been done including the different parts of the realization and life of the instrument, from integration on-ground to in-flight stability during the scientific acquisitions. The primary mirror (M1) temperature will be monitored and finely tuned via an active thermal control system based on thermistors and heaters. The heaters will be switched on and off to maintain the M1 temperature within ±1K thanks to a proportional-integral-derivative (PID) controller

Methodology for the analysis of a thermo-mechanically deformed optical system

n/