179,254 research outputs found
The status of the world's public-domain digital topography of the land and ice
There has been no reasonably comprehensive survey of what digital, elevation models of the Earth's land surface exist in the publicâdomain. We have performed a survey of these data, and we report on the coverage and cost of the data we have established. To qualify for inclusion in our coverage, we required the data to be available to the general public, obtainable from a specific, identified institution, and to have a determined cost. We have established that at 100 m resolution coverage exists of most of the the developed world. In the United States and Australia, the data are available at cost, at around 3000 km^{2} ÂŁ^{-1}. In the remaining countries, the data are available from mapping agencies with varying commercial pricing strategies. The total cost of the data we have identified is ÂŁ 1,688,312. For much of the world we are unable to confirm the existence of such data, and our experience is that in these regions it will prove difficult to obtain digital, elevation data, if, indeed, it exists at all
Levinson's theorem for graphs
We prove an analog of Levinson's theorem for scattering on a weighted
(m+1)-vertex graph with a semi-infinite path attached to one of its vertices.
In particular, we show that the number of bound states in such a scattering
problem is equal to m minus half the winding number of the phase of the
reflection coefficient (where each so-called half-bound state is counted as
half a bound state).Comment: 10 pages, 1 figure; v2: minor correction
Need to Know Review Number two: What Local Government Needs to Know about Public Health
This review of existing research on local government and public health focuses on the leadership role of local government in developing local public health systems that are capable of addressing the wider determinants of health
Bryophytes of Mona Island Natural Reserve, Puerto Rico
This checklist provides in addition to a list of mosses and hepatics, a key to the species. We report 17 moss species of which 9 are new to Mona Island and 3 are new records for Puerto Rico (Fissidens minutus, Plaubelia sprengelii and Brymela callicostelloides). This report represents a 35% increase to the moss flora of Mona Island. Thirteen hepatics are reported of which 8 are new records, representing an increase of 31%. Two new synonyms (Bryum microdecurrens = Bryum coronatum, Riccia brittonii = Riccia elliottii) are included. No hornworts are known for the island.Este listado en adiciĂłn a la lista de musgos y hepĂĄticas provee una clave para las especies. Reportamos 17 especies de musgos de los cuales 9 son nuevos para Isla de Mona y 3 son registros nuevos para Puerto Rico (Fissidens minutus, Plaubelia sprengelii y Brymela callicostelloides). Este reporte representa un aumento de un 35% en la flora muscinal de Isla de Mona. Trece hepĂĄticas son reportadas de las cuales 8 son registros nuevos, representando un aumento de 31%. Dos nuevos sinĂłnimos (Bryum microdecurrens = Bryum coronatum, Riccia brittonii = Riccia elliottii) se incluyen. No se conocen registros de antocerotes para la isla
Streamlined life cycle assessment of transparent silica aerogel made by supercritical drying
This is the post-print version of the Article. The official published version can be accessed from the link below - Copyright @ 2011 ElsevierWhen developing sustainable building fabric technologies, it is essential that the energy use and CO2 burden arising from manufacture does not outweigh the respective in-use savings. This study investigates this paradigm by carrying out a streamlined life cycle assessment (LCA) of silica aerogel. This unique, nanoporous translucent insulation material has the lowest thermal conductivity of any solid, retaining up to four times as much heat as conventional insulation, whilst being highly transparent to light and solar radiation. Monolithic silica aerogel has been cited as the âholy grailâ of future glazing technology. Alternatively, translucent granular aerogel is now being produced on a commercial scale. In each case, many solvents are used in production, often accompanied by intensive drying processes, which may consume large amounts of energy and CO2. To date, there has been no peer-reviewed LCA of this material conducted to the ISO 14000 standard. Primary data for this âcradle-to-factory gateâ LCA is collected for silica aerogel made by low and high temperature supercritical drying. In both cases, the mass of raw materials and electricity usage for each process is monitored to determine the total energy use and CO2 burden. Findings are compared against the predicted operational savings arising from retrofitting translucent silica aerogel to a single glazed window to upgrade its thermal performance. Results should be treated as a conservative estimate as the aerogel is produced in a laboratory, which has not been developed for mass manufacture or refined to reduce its environmental impact. Furthermore, the samples are small and assumptions to upscale the manufacturing volume occur without major changes to production steps or equipment used. Despite this, parity between the CO2 burden and CO2 savings is achieved in less than 2 years, indicating that silica aerogel can provide a measurable environmental benefit.This work is funded by the EPSRC, Brunel University and Buro Happold Ltd, the University of Bath is funded by the EPSRC grant EP/F018622/1
Improving the thermal performance of single-glazed windows using translucent granular aerogel
Copyright @ 2011 Taylor & FrancisCost-effective materials, products and installation methods are required to improve the energy efficiency of the UK's existing building stock. The aim of this paper is to assess the potential for high-performance translucent granular aerogel insulation to be retrofitted over single glazing to reduce heat loss without blocking out all of the useful natural light. In situ testing of a 10-mm-thick prototype panel, consisting of a clear twin-wall polycarbonate sheet filled with granular aerogel, was carried out and validated with steady-state calculations. Results demonstrate that an 80% reduction in heat loss can be achieved without detrimental reductions in light transmission. Payback calculations accounting for the inevitable thermal bridging from openable solutions such as roller shutters or pop-in secondary glazing suggest that a return on investment between 3.5 and 9.5 years is possible if products are consistently used over the heating season. Granular aerogel is a promising material for improving the thermal performance of existing windows. Future research will seek to map out different ways in which the material can be applied to the existing UK housing stock, identifying which systems offer the greatest potential for widespread CO2 savings over their life cycle.This work is funded by the EPSRC, Brunel University and Buro Happold Ltd
Domestic UK retrofit challenge: Barriers, incentives and current performance leading into the green deal
Copyright @ 2012 Elsevier - The official published version can be accessed from the link below.This paper reviews the thermal performance of the existing UK housing stock, the main fabric efficiency incentive schemes and the barriers to obtaining deep energy and CO2 savings throughout the stock. The UK faces a major challenge to improve the thermal performance of its existing housing stock. Millions of dwellings possess âhard-to-treatâ solid walls and have glazing which is not cost effective to improve. A range of fabric efficiency incentive schemes exist, but many do not target the full range of private and social housing. From now on, the Green Deal will be the UK's key energy efficiency policy. However, the scheme is forecasted to have low consumer appeal and low incentives for investors. Moreover, calculated Green Deal loan repayments will be reliant upon estimated energy savings, yet it is claimed that retrofit measures may only be half as effective as anticipated due to a lack of monitoring, poor quality installation and the increased use of heating following refurbishment. Looking to Germany, there has been success through the Passivhaus standard, but the UK currently lacks appropriate skills and cost effective components to replicate this approach. In addition, the embodied energy in retrofit products and materials threatens to counter operational savings.This study is funded by the EPSRC, Brunel University and Buro Happold Ltd
Recommended from our members
Manufacturing flexible light-emitting polymer displays with conductive lithographic film technology
We report on a new low-cost manufacturing process for flexible displays that has the potential to rapidly expand the market into areas that have traditionally been outside the scope of such technology. In this paper we consider the feasibility of using offset-lithography to deposit contacts for polymer light-emitting displays. We compare and contrast manufacturing criteria and present a case study detailing our initial results. It is expected that these developments will stimulate further progress in multilayer device
fabrication.
Cheap, flexible conductive interconnects have the potential to find applications in a wide variety of device structures. For the more challenging exploitation areas in multilayer devices, such as displays, it was found that the properties of conductive lithographic films were not optimal in their current form. Three parameters (conductivity, surface roughness and surface work function) were identified as critical to device fabrication. Calendering and electroless plating were investigated as methods to improve these properties. Both methods aimed to modify the surface roughness and conductivity, with the plating study also modifying the work function
- âŠ