6,364 research outputs found
Low frequency sound propagation in activated carbon
Activated carbon can adsorb and desorb gas molecules onto and off its surface. Research has examined
whether this sorption affects low frequency sound waves, with pressures typical of audible
sound, interacting with granular activated carbon. Impedance tube measurements were undertaken
examining the resonant frequencies of Helmholtz resonators with different backing materials. It
was found that the addition of activated carbon increased the compliance of the backing volume.
The effect was observed up to the highest frequency measured (500 Hz), but was most significant at
lower frequencies (at higher frequencies another phenomenon can explain the behavior). An apparatus
was constructed to measure the effective porosity of the activated carbon as well as the number
of moles adsorbed at sound pressures between 104 and 118 dB and low frequencies between 20
and 55 Hz. Whilst the results were consistent with adsorption affecting sound propagation, other
phenomena cannot be ruled out. Measurements of sorption isotherms showed that additional energy
losses can be caused by water vapor condensing onto and then evaporating from the surface of the
material. However, the excess absorption measured for low frequency sound waves is primarily
caused by decreases in surface reactance rather than changes in surface resistance
Neuromorphic Dynamics at the Nanoscale in Silicon Suboxide RRAM
Resistive random-access memories, also known as memristors, whose resistance can be modulated by the electrically driven formation and disruption of conductive filaments within an insulator, are promising candidates for neuromorphic applications due to their scalability, low-power operation and diverse functional behaviors. However, understanding the dynamics of individual filaments, and the surrounding material, is challenging, owing to the typically very large cross-sectional areas of test devices relative to the nanometer scale of individual filaments. In the present work, conductive atomic force microscopy is used to study the evolution of conductivity at the nanoscale in a fully CMOS-compatible silicon suboxide thin film. Distinct filamentary plasticity and background conductivity enhancement are reported, suggesting that device behavior might be best described by composite core (filament) and shell (background conductivity) dynamics. Furthermore, constant current measurements demonstrate an interplay between filament formation and rupture, resulting in current-controlled voltage spiking in nanoscale regions, with an estimated optimal energy consumption of 25 attojoules per spike. This is very promising for extremely low-power neuromorphic computation and suggests that the dynamic behavior observed in larger devices should persist and improve as dimensions are scaled down
A nanoscale analysis method to reveal oxygen exchange between environment, oxide, and electrodes in ReRAM devices
The limited sensitivity of existing analysis techniques at the nanometer scale makes it challenging to systematically examine the complex interactions in redox-based resistive random access memory (ReRAM) devices. To test models of oxygen movement in ReRAM devices beyond what has previously been possible, we present a new nanoscale analysis method. Harnessing the power of secondary ion mass spectrometry, the most sensitive surface analysis technique, for the first time, we observe the movement of 16O across electrically biased SiOx ReRAM stacks. We can therefore measure bulk concentration changes in a continuous profile with unprecedented sensitivity. This reveals the nanoscale details of the reversible field-driven exchange of oxygen across the ReRAM stack. Both the reservoir-like behavior of a Mo electrode and the injection of oxygen into the surface of SiOx from the ambient are observed within one profile. The injection of oxygen is controllable through changing the porosity of the SiOx layer. Modeling of the electric fields in the ReRAM stacks is carried out which, for the first time, uses real measurements of both the interface roughness and electrode porosity. This supports our findings helping to explain how and where oxygen from ambient moisture enters devices during operation
Errordiary: Support for Teaching Human Error
Understanding human error is an important part of making good choices about interaction design. In this paper we report an innovative approach to the teaching of human error. Errordiary is an online repository of the funny, frustrating and sometimes fatal human errors that happen on a daily basis. Students engage with these real-life cases of human error and are challenged to classify them. This raises awareness of everyday human error, teaches students about the psychology of human error, and gives students the experience of dealing with the difficulties of applying classification schemes to real world data
Exploring the uptake and use of electronic cigarettes provided to smokers accessing homeless centres: a four-centre cluster feasibility trial
Background: Smoking prevalence is extremely high in adults experiencing homelessness, and there is little evidence regarding which cessation interventions work best. This study explored the feasibility of providing free electronic cigarette starter kits to smokers accessing homeless centres in the UK. /
Objectives: Seven key objectives were examined to inform a future trial: (1) assess willingness of smokers to participate in the study to estimate recruitment rates; (2) assess participant retention in the intervention and control arms; (3) examine the perceived value of the intervention, facilitators of and barriers to engagement, and influence of local context; (4) assess service providers’ capacity to support the study and the type of information and training required; (5) assess the potential efficacy of supplying free electronic cigarette starter kits; (6) explore the feasibility of collecting data on contacts with health-care services as an input to a main economic evaluation; and (7) estimate the cost of providing the intervention and usual care. /
Design: A prospective cohort four-centre pragmatic cluster feasibility study with embedded qualitative process evaluation. /
Setting: Four homeless centres. Two residential units in London, England. One day centre in Northampton, England. One day centre in Edinburgh, Scotland. /
Intervention: In the intervention arm, a single refillable electronic cigarette was provided together with e-liquid, which was provided once per week for 4 weeks (choice of three flavours: fruit, menthol or tobacco; two nicotine strengths: 12 or 18 mg/ml). There was written information on electronic cigarette use and support. In the usual-care arm, written information on quitting smoking (adapted from NHS Choices) and signposting to the local stop smoking service were provided. /
Results: Fifty-two per cent of eligible participants invited to take part in the study were successfully recruited (56% in the electronic cigarette arm; 50.5% in the usual-care arm; total n = 80). Retention rates were 75%, 63% and 59% at 4, 12 and 24 weeks, respectively. The qualitative component found that perceived value of the intervention was high. Barriers were participants’ personal difficulties and cannabis use. Facilitators were participants’ desire to change, free electronic cigarettes and social dynamics. Staff capacity to support the study was generally good. Carbon monoxide-validated sustained abstinence rates at 24 weeks were 6.25% (3/48) in the electronic cigarette arm compared with 0% (0/32) in the usual-care arm (intention to treat). Almost all participants present at follow-up visits completed measures needed for input into an economic evaluation, although information about staff time to support usual care could not be gathered. The cost of providing the electronic cigarette intervention was estimated at £114.42 per person. An estimated cost could not be calculated for usual care. /
Limitations: Clusters could not be fully randomised because of a lack of centre readiness. The originally specified recruitment target was not achieved and recruitment was particularly difficult in residential centres. Blinding was not possible for the measurement of outcomes. Staff time supporting usual care could not be collected. /
Conclusions: The study was associated with reasonable recruitment and retention rates and promising acceptability in the electronic cigarette arm. Data required for full cost-effectiveness evaluation in the electronic cigarette arm could be collected, but some data were not available in the usual-care arm. /
Future work: Future research should focus on several key issues to help design optimal studies and interventions with this population, including which types of centres the intervention works best in, how best to retain participants in the study, how to help staff to deliver the intervention, and how best to record staff treatment time given the demands on their time. /
Trial registration: Current Controlled Trials ISRCTN14140672; the protocol was registered as researchregistry4346. /
Funding: This project was funded by the National Institute for Health Research (NIHR) Public Health Research programme and will be published in full in Public Health Research; Vol. 9, No. 7. See the NIHR Journals Library website for further project information
Encrusted and incarcerated urinary bladder catheter: what are the options?
Urinary bladder catheter encrustations are known complications of long-term urinary catheterisation, which is commonly seen in clinical practice. These encrustations can impede deflation of the balloon and therefore cause problems in the removal of the catheter. The options in managing an encrusted and incarcerated urinary bladder catheter include extracorporeal shock wave lithotripsy and lithoclast. We describe here another technique of dealing with a stuck and encrustated catheter, via direct crushing of the encrustations with a rigid cystoscope inserted through a suprapubic cystostomy tract
Can Axillary Lymph Node Dissection Be Safely Omitted for Early-Stage Breast Cancer Patients with Sentinel Lymph Node Micrometastasis?
A single fungal strain was the unexpected cause of a mass aspergillosis outbreak in the world's largest and only flightless parrot.
Kākāpō are a critically endangered species of parrots restricted to a few islands off the coast of New Zealand. Kākāpō are very closely monitored, especially during nesting seasons. In 2019, during a highly successful nesting season, an outbreak of aspergillosis affected 21 individuals and led to the deaths of 9, leaving a population of only 211 kākāpō. In monitoring this outbreak, cultures of aspergillus were grown, and genome sequenced. These sequences demonstrate that, very unusually for an aspergillus outbreak, a single strain of aspergillus caused the outbreak. This strain was found on two islands, but only one had an outbreak of aspergillosis; indicating that the strain was necessary, but not sufficient, to cause disease. Our analysis provides an understanding of the 2019 outbreak and provides potential ways to manage such events in the future
- …