299 research outputs found
Accurate estimates of absolute left ventricular volumes from equilibrium radionuclide angiographic count data using a simple geometric attenuation correction
To simplify and clarify the methods of obtaining attenuation-corrected equilibrium radionuclide angiographic estimates of absolute left ventricular volumes, 27 patients who also had biplane contrast cineangiography were evaluated. Background-corrected left ventricular end-diastolic and end-systolic counts were obtained by semiautomated variable and hand-drawn regions of interest and were normalized to cardiac cycles processed, frame rate and blood sample counts. Blood sample counts were acquired on (d°) and at a distance (d′) from the collimator. A simple geometric attenuation correction was performed to obtain absolute left ventricular volume estimates.Using blood sample counts obtained at d° or d′, the attentuation.corrected radionuclide left ventricular end-diastolic volume estimates using both region of interest selection methods correlated with the cineangiographic end-diastolic volumes (r = 0.95 to 0.96). However, both mean radionuclide semiautomated variable left ventricular end-diastolic volumes (179 ± 100 [± 1 standard deviation] and 185 ± 102 ml, p < 0.001) were smaller than the average cineangiographic end-diastolic volume (217 ± 102 ml), and both mean hand-drawn left ventricular end-diastolic volumes (212 ± 104 and 220 ± 106 ml) did not differ from the average cineangiographic end-diastolic volume. Using the blood sample counts obtained at d° or d′, the attenuation-corrected radionuclide left ventricular end-systolic volume estimates using both region of interest selection methods correlated with the cineangiographic end-systolic volumes (r = 0.96 to 0.98). Also, using blood sample counts at d°, the mean radionuclide semiautomated variable left ventricular end-systolic volume (116 ± 98 ml, p < 0.05) was less than the average cineangiographic end-systolic volume (128 ± 98 ml), and the other radionuclide end-systolic volumes did not differ from the average cineangiographic end-systolic volume.Therefore, it is concluded that: 1) a simple geometric attenuation-correction of radionuclide left ventricular end-diastolic and end-systolic count data provides accurate estimates of biplane cineangiographic end-diastolic and end-systolic volumes; and 2) the hand-drawn region of interest selection method, unlike the semiautomated variable method that underestimates end-diastolic and end-systolic volumes, provides more accurate estimates of biplane cineangiographic left ventricular volumes irrespective of the distance blood sample counts are acquired from the collimator
Accurate estimates of absolute left ventricular volumes from equilibrium radionuclide angiographic count data using a simple geometric attenuation correction
To simplify and clarify the methods of obtaining attenuation-corrected equilibrium radionuclide angiographic estimates of absolute left ventricular volumes, 27 patients who also had biplane contrast cineangiography were evaluated. Background-corrected left ventricular end-diastolic and end-systolic counts were obtained by semiautomated variable and hand-drawn regions of interest and were normalized to cardiac cycles processed, frame rate and blood sample counts. Blood sample counts were acquired on (d°) and at a distance (d′) from the collimator. A simple geometric attenuation correction was performed to obtain absolute left ventricular volume estimates.Using blood sample counts obtained at d° or d′, the attentuation.corrected radionuclide left ventricular end-diastolic volume estimates using both region of interest selection methods correlated with the cineangiographic end-diastolic volumes (r = 0.95 to 0.96). However, both mean radionuclide semiautomated variable left ventricular end-diastolic volumes (179 ± 100 [± 1 standard deviation] and 185 ± 102 ml, p < 0.001) were smaller than the average cineangiographic end-diastolic volume (217 ± 102 ml), and both mean hand-drawn left ventricular end-diastolic volumes (212 ± 104 and 220 ± 106 ml) did not differ from the average cineangiographic end-diastolic volume. Using the blood sample counts obtained at d° or d′, the attenuation-corrected radionuclide left ventricular end-systolic volume estimates using both region of interest selection methods correlated with the cineangiographic end-systolic volumes (r = 0.96 to 0.98). Also, using blood sample counts at d°, the mean radionuclide semiautomated variable left ventricular end-systolic volume (116 ± 98 ml, p < 0.05) was less than the average cineangiographic end-systolic volume (128 ± 98 ml), and the other radionuclide end-systolic volumes did not differ from the average cineangiographic end-systolic volume.Therefore, it is concluded that: 1) a simple geometric attenuation-correction of radionuclide left ventricular end-diastolic and end-systolic count data provides accurate estimates of biplane cineangiographic end-diastolic and end-systolic volumes; and 2) the hand-drawn region of interest selection method, unlike the semiautomated variable method that underestimates end-diastolic and end-systolic volumes, provides more accurate estimates of biplane cineangiographic left ventricular volumes irrespective of the distance blood sample counts are acquired from the collimator
1130 Cardiac diastolic function evaluation using a novel method for quantification of cine myocardial deformation analysis (cMDA) based on non-rigid registration
Left ventricular twist, but not circumferential-longitudinal shear angle, increases with increasing age in normal subjects
Chymase-Dependent Generation of Angiotensin II from Angiotensin-(1-12) in Human Atrial Tissue
Since angiotensin-(1-12) [Ang-(1-12)] is a non-renin dependent alternate precursor for the generation of cardiac Ang peptides in rat tissue, we investigated the metabolism of Ang-(1-12) by plasma membranes (PM) isolated from human atrial appendage tissue from nine patients undergoing cardiac surgery for primary control of atrial fibrillation (MAZE surgical procedure). PM was incubated with highly purified 125I-Ang-(1-12) at 37°C for 1 h with or without renin-angiotensin system (RAS) inhibitors [lisinopril for angiotensin converting enzyme (ACE), SCH39370 for neprilysin (NEP), MLN-4760 for ACE2 and chymostatin for chymase; 50 µM each]. 125I-Ang peptide fractions were identified by HPLC coupled to an inline γ-detector. In the absence of all RAS inhibitor, 125I-Ang-(1-12) was converted into Ang I (2±2%), Ang II (69±21%), Ang-(1-7) (5±2%), and Ang-(1-4) (2±1%). In the absence of all RAS inhibitor, only 22±10% of 125I-Ang-(1-12) was unmetabolized, whereas, in the presence of the all RAS inhibitors, 98±7% of 125I-Ang-(1-12) remained intact. The relative contribution of selective inhibition of ACE and chymase enzyme showed that 125I-Ang-(1-12) was primarily converted into Ang II (65±18%) by chymase while its hydrolysis into Ang II by ACE was significantly lower or undetectable. The activity of individual enzyme was calculated based on the amount of Ang II formation. These results showed very high chymase-mediated Ang II formation (28±3.1 fmol×min−1×mg−1, n = 9) from 125I-Ang-(1-12) and very low or undetectable Ang II formation by ACE (1.1±0.2 fmol×min−1×mg−1). Paralleling these findings, these tissues showed significant content of chymase protein that by immunocytochemistry were primarily localized in atrial cardiac myocytes. In conclusion, we demonstrate for the first time in human cardiac tissue a dominant role of cardiac chymase in the formation of Ang II from Ang-(1-12)
1132 Assessment of semi-automated cardiac time volume curves and comparison with cine myocardial deformation analysis (cMDA) derived diastolic cardiac indices in pressure and volume overload conditions
The renin‐angiotensin‐aldosterone system and its suppression
Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/148403/1/jvim15454-sup-0001-supinfo.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/148403/2/jvim15454-sup-0002-figures.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/148403/3/jvim15454-sup-0005-TableS3.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/148403/4/jvim15454-sup-0004-TableS2.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/148403/5/jvim15454-sup-0007-TableS5.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/148403/6/jvim15454_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/148403/7/jvim15454.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/148403/8/jvim15454-sup-0006-TableS4.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/148403/9/jvim15454-sup-0003-TableS1.pd
A dual propagation contours technique for semi-automated assessment of systolic and diastolic cardiac function by CMR
<p>Abstract</p> <p>Background</p> <p>Although cardiovascular magnetic resonance (CMR) is frequently performed to measure accurate LV volumes and ejection fractions, LV volume-time curves (VTC) derived ejection and filling rates are not routinely calculated due to lack of robust LV segmentation techniques. VTC derived peak filling rates can be used to accurately assess LV diastolic function, an important clinical parameter. We developed a novel geometry-independent dual-contour propagation technique, making use of LV endocardial contours manually drawn at end systole and end diastole, to compute VTC and measured LV ejection and filling rates in hypertensive patients and normal volunteers.</p> <p>Methods</p> <p>39 normal volunteers and 49 hypertensive patients underwent CMR. LV contours were manually drawn on all time frames in 18 normal volunteers. The dual-contour propagation algorithm was used to propagate contours throughout the cardiac cycle. The results were compared to those obtained with single-contour propagation (using either end-diastolic or end-systolic contours) and commercially available software. We then used the dual-contour propagation technique to measure peak ejection rate (PER) and peak early diastolic and late diastolic filling rates (ePFR and aPFR) in all normal volunteers and hypertensive patients.</p> <p>Results</p> <p>Compared to single-contour propagation methods and the commercial method, VTC by dual-contour propagation showed significantly better agreement with manually-derived VTC. Ejection and filling rates by dual-contour propagation agreed with manual (dual-contour – manual PER: -0.12 ± 0.08; ePFR: -0.07 ± 0.07; aPFR: 0.06 ± 0.03 EDV/s, all P = NS). However, the time for the manual method was ~4 hours per study versus ~7 minutes for dual-contour propagation. LV systolic function measured by LVEF and PER did not differ between normal volunteers and hypertensive patients. However, ePFR was lower in hypertensive patients vs. normal volunteers, while aPFR was higher, indicative of altered diastolic filling rates in hypertensive patients.</p> <p>Conclusion</p> <p>Dual-propagated contours can accurately measure both systolic and diastolic volumetric indices that can be applied in a routine clinical CMR environment. With dual-contour propagation, the user interaction that is routinely performed to measure LVEF is leveraged to obtain additional clinically relevant parameters.</p
Native myocardial T1 mapping in pulmonary hypertension: correlations with cardiac function and hemodynamics
- …