Influence of thermal hydrolysis pretreatment on physicochemical properties and anaerobic biodegradability of waste activated sludge with different solids content

© 2018 Elsevier Ltd The influence of thermal hydrolysis pretreatment (THP) on physicochemical properties (pH, total solids, volatile solids, chemical oxygen demand, total nitrogen, ammonium nitrogen, volatile fatty acids, viscosity, and cell morphology) and anaerobic biodegradability of highly concentrated waste activated sludge (WAS) with TS content ranging from 1 to 7% was evaluated at different temperatures ranging from 100 to 220 °C. The biomethane potential (BMP) of the WAS was systematically analyzed and evaluated. Images of its cellular structure were also analyzed. The results indicated that THP is a useful method for solubilizing volatile solids and enhancing CH 4 production regardless of the TS content of the WAS feed. The ultimate CH 4 production determined from the BMP analysis was 313–348 L CH 4 /kg VS (72.6–74.1% CH 4 ) at the optimum THP temperature of 180 °C. The results showed that THP could improve both the capacity and efficiency of anaerobic digestion, even at a high TS content, and could achieve the dual purpose of sludge reduction and higher energy recovery

Effect of organic loading rate on the recovery of nutrients and energy in a dual-chamber microbial fuel cell

© 2019 Elsevier Ltd This study aimed to assess the impacts of organic loading rate (OLR) (435–870 mgCOD/L·d) on nutrients recovery via a double-chamber microbial fuel cell (MFC) for treating domestic wastewater. Electricity generation was also explored at different OLRs, including power density and coulombic efficiency. Experimental results suggested the MFC could successfully treat municipal wastewater with over 90% of organics being removed at a wider range of OLR from 435 to 725 mgCOD/L·d. Besides, the maximum power density achieved in the MFC was 253.84 mW/m2 at the OLR of 435 mgCOD/L·d. Higher OLR may disrupt the recovery of PO43−-P and NH4+-N via the MFC. The same pattern was observed for the coulombic efficiency of the MFC and its highest value was 25.01% at the OLR of 435 mgCOD/L·d. It can be concluded that nutrients and electrical power can be simultaneously recovered from municipal wastewater via the dual-chamber MFC

Insight into greenhouse gases emissions from the two popular treatment technologies in municipal wastewater treatment processes

© 2019 Elsevier B.V. Due to the impact of methane, carbon dioxide and nitrous oxide on global warming, the quantity of these greenhouse gases (GHG) emissions from municipal wastewater treatment plants (WWTPs) has attracted more and more attention. Consequently, GHG emissions from the two popular treatment technologies: anaerobic/anoxic/oxic (AAO) process and sequencing batch reactor (SBR) should be properly identified and discussed toward the current situation in developing countries. Direct and indirect carbon dioxide (with and/or without including in Intergovernmental Panel on Climate Change (IPCC) report) are all discussed in this article. This literature study observed that a quantity of total carbon dioxide emissions from SBR (374 g/m3 of wastewater) was double that of AAO whilst 10% of these was direct carbon dioxide. Methane emitted from an SBR was 0.50 g/m3 wastewater while 0.18 g CH4/m3 wastewater was released from an AAO. The level of nitrous oxide from AAO and SBR accounted for 0.97 g/m3 wastewater and 4.20 g/m3 wastewater, respectively. Although these results were collected from different WWTPs and where influent was in various states, GHGs emitted from both biological units and other treatment units in various processes are significant. The results also revealed that aerated zone is the major contributing factor in a wastewater treatment plant to the large amount of GHG emissions

Anaerobic membrane bioreactors for antibiotic wastewater treatment: Performance and membrane fouling issues

© 2018 Elsevier Ltd Antibiotic wastewater has become a major concern due to the toxicity and recalcitrance of antibiotics. Anaerobic membrane bioreactors (AnMBRs) are considered alternative technology for treating antibiotic wastewater because of their advantages over the conventional anaerobic processes and aerobic MBRs. However, membrane fouling remains the most challenging issue in the AnMBRs’ operation and this limits their application. This review critically discusses: (i) antibiotics removal and antibiotic resistance genes (ARGs) in different types of AnMBRs and the impact of antibiotics on membrane fouling and (ii) the integrated AnMBRs systems for fouling control and removal of antibiotics. The presence of antibiotics in AnMBRs could aggravate membrane fouling by influencing fouling-related factors (i.e., sludge particle size, extracellular polymeric substances (EPS), soluble microbial products (SMP), and fouling-related microbial communities). Conclusively, integrated AnMBR systems can be a practical technology for antibiotic wastewater treatment

Optimization of hydraulic retention time and organic loading rate for volatile fatty acid production from low strength wastewater in an anaerobic membrane bioreactor

© 2018 Elsevier Ltd This study aims to investigate the production of volatile fatty acids (VFAs) from low strength wastewater at various hydraulic retention time (HRT) and organic loading rate (OLR) in a continuous anaerobic membrane bioreactor (AnMBR) using glucose as carbon source. This experiment was performed without any selective inhibition of methanogens and the reactor pH was maintained at 7.0 ± 0.1. 48, 24, 18, 12, 8 and 6 h-HRTs were applied and the highest VFA concentration was recorded at 8 h with an overall VFA yield of 48.20 ± 1.21 mg VFA/100 mg COD feed . Three different ORLs were applied (350, 550 and 715 mg COD feed ) at the optimum 8 h-HRT. The acetic and propanoic acid concentration maximums were (1.1845 ± 0.0165 and 0.5160 ± 0.0141 mili-mole/l respectively) at 550 mg COD feed . The isobutyric acid concentration was highest (0.3580 ± 0.0407 mili-mole/l) at 715 mg COD feed indicating butyric-type fermentation at higher organic loading rate

Hemodialysis vascular access options in pediatrics: considerations for patients and practitioners

Recent data indicate that the incidence of end-stage renal disease (ESRD) in pediatric patients (age 0–19 years) has increased over the past two decades. Similarly, the prevalence of ESRD has increased threefold over the same period. Hemodialysis (HD) continues to be the most frequently utilized modality for renal replacement therapy in incident pediatric ESRD patients. The number of children on HD exceeded the sum total of those on peritoneal dialysis and those undergoing pre-emptive renal transplantation. Choosing the best vascular access option for pediatric HD patients remains challenging. Despite a national initiative for fistula first in the adult hemodialysis population, the pediatric nephrology community in the United States of America utilizes central venous catheters as the primary dialysis access for most patients. Vascular access management requires proper advance planning to assure that the best permanent access is placed, seamless communication involving a multidisciplinary team of nephrologists, nurses, surgeons, and interventional radiologists, and ongoing monitoring to ensure a long life of use. It is imperative that practitioners have a long-term vision to decrease morbidity in this unique patient population. This article reviews the various types of pediatric vascular accesses used worldwide and the benefits and disadvantages of these various forms of access

Vascular Reconstructions in Kidney Transplantation

n/