Target value design: using collaboration and a lean approach to reduce construction cost

Target Costing is an effective management technique that has been used in manufacturing for decades to achieve cost predictability during new products development. Adoption of this technique promises benefits for the construction industry as it struggles to raise the number of successful outcomes and certainty of project delivery in terms of cost, quality and time. Target Value Design is a management approach that takes the best features of Target Costing and adapts them to the peculiarities of construction. In this paper the concept of Target Value Design is introduced based on the results of action research carried out on 12 construction projects in the USA. It has been shown that systemic application of Target Value Design leads to significant improvement of project performance – the final cost of projects was on average 15% less than market cost. The construction industry already has approaches that have similarities with elements of the Target Value Design process or uses the same terminology, e.g. Partnering and Target Cost Contracts, Cost planning, etc. Following an exploration of the similarities and differences Target Value Design is positioned as a form of Target Costing for construction that offers a more reliable route to successful projects outcomes

Molybdenum distributions and variability in drinking water from England and Wales

An investigation has been carried out of molybdenum in drinking water from a selection of public supply sources and domestic taps across England and Wales. This was to assess concentrations in relation to the World Health Organization (WHO) health-based value for Mo in drinking water of 70 μg/l and the decision to remove the element from the list of formal guideline values. Samples of treated drinking water from 12 water supply works were monitored up to four times over an 18-month period, and 24 domestic taps were sampled from three of their supply areas. Significant (p  0.05) were detected. Tap water samples collected from three towns (North Wales, the English Midlands, and South East England) supplied uniquely by upland reservoir water, river water, and Chalk groundwater, respectively, also showed a remarkable uniformity in Mo concentrations at each location. Within each, the variability was very small between houses (old and new), between pre-flush and post-flush samples, and between the tap water and respective source water samples. The results indicate that water distribution pipework has a negligible effect on supplied tap water Mo concentrations. The findings contrast with those for Cu, Zn, Ni, Pb, and Cd, which showed significant differences (p < 0.05) in concentrations between pre-flush and post-flush tap water samples. In two pre-flush samples, concentrations of Ni or Pb were above drinking water limits, although in all cases, post-flush waters were compliant. The high concentrations, most likely derived from metal pipework in the domestic distribution system, accumulated during overnight stagnation. The concentrations of Mo observed in British drinking water, in all cases less than 2 μg/l, were more than an order of magnitude below the WHO health-based value and suggest that Mo is unlikely to pose a significant health or water supply problem in England and Wales

Rheology at the micro-scale: new tools for bio-analysis

We present a simple and non-invasive experimental procedure to measure the linear viscoelastic properties of cells by passive particle tracking microrheology. In order to do this, a generalised Langevin equation is adopted to relate the timedependent thermal fluctuations of a probe sensor, immobilised to the cell’s membrane, to the frequency-dependent viscoelastic moduli of the cell. The method has been validated by measuring the linear viscoelastic response of a soft solid and then applied to cell physiology studies. It is shown that the viscoelastic moduli are related to the cell’s cytoskeletal structure, which in this work is modulated either by inhibiting the actin/myosin-II interactions by means of blebbistatin or by varying the solution osmolarity from iso- to hypo-osmotic conditions. The insights gained from this form of rheological analysis promises to be a valuable addition to physiological studies; e.g. cell physiology during pathology and pharmacological response

Close contacts of xenograft recipients: Ethical considerations due to risk of xenozoonosis

With decades of pre-clinical studies culminating in the recent clinical application of xenotransplantation, it would appear timely to provide recommendations for operationalizing oversight of xenotransplantation clinical trials. Ethical issues with clinical xenotransplantation have been described for decades, largely centering on animal welfare, the risks posed to the recipient, and public health risks posed by potential spread of xenozoonosis. Much less attention has been given to considerations relating to potentially elevated risks faced by those who may care for or otherwise have close contact with xenograft recipients. This paper examines the ethical and logistical issues raised by the potential exposure to xenozoonotic disease faced by close contacts of xenotransplant recipients—defined herein as including but not limited to caregivers, household contacts, and sexual partners— which warrants special attention given their increased risk of exposure to infection compared to the general public. We discuss implications of assent or consent by these close contacts to potentially undergo, along with the recipient, procedures for infection screening and possible quarantine. We then propose several options and recommendations for operationalizing oversight of xenotransplantation clinical trials that could account for and address close contacts’ education on and agency regarding the risk of xenozoonosis

Modelling the energy gap in transition metal/aluminium bilayers"

We present an application of the generalised proximity effect theory.Comment: 15 pages, 11 figures, presented at workshop on low temperature superconducting electronics at the University of Twente, The Netherland

Mineral exploration in the Lower Palaeozoic rocks of south-west Cumbria. Part 1, regional surveys

The results of geochemical, geological and geophysical surveys over Lower Palaeozoic rocks in the south-western part of Cumbria are given in two reports. This report (Part 1) describes the results of a geochemical drainage survey and an examination of mineralised sites, and relates them to information from new geological mapping and an assessment of regional geophysical data. Part 2 contains details of follow-up surveys in the Black Combe inlier. The geochemical drainage survey, involving the collection and analysis of heavy mineral concentrates and stream sediment samples from 119 sites, found substantial antimony, arsenic, barium, bismuth, copper, iron, lead, tin, tungsten and zinc anomalies. Gold was reported for the first time from this part of the Lake District: small amounts were noted in panned concentrates from five sites. Other minerals identified in panned concentrates included arsenopyrite, baryte, bismutite, bismuthinite, cassiterite, chalcopyrite, cerussite, pyrite, pyromorphite, scheelite, sphalerite, stolzite and wolfram&e. The examination of old workings and outcrops revealed many undocumented occurrences of quartzsulphide vein-style mineralisation. The chemical analysis of samples taken from old workings and other occurrences confirmed field observations that locally, particularly in the Black Combe area, this mineralisation is polymetallic with variable amounts of arsenic, gold, bismuth, copper, lead, zinc and in a few cases antimony, barium, cobalt, nickel, tungsten and tin. Iron mineralisation occurs both as oxide (hematite) and sulphide deposits. Mercury was present in appreciable amounts in samples from the High Brow pyrite mine. The distribution of panned concentrate anomalies suggests that the vein-style mineralisation is polyphase and that individual phases may be zoned. Highest zinc anomalies occur near Torver and the highest lead on the west side of Black Combe. Tin and tungsten are restricted largely to the central part of Black Combe, and the most prominent arsenic and bismuth anomalies are found in the same area. Copper anomalies are widespread over the Skiddaw Group and the Borrowdale Volcanic Group. Barium anomalies indicate that baryte mineralisation is weak and localised, occurring principally within the Black Combe area and close to the Windermere Supergroup basal unconformity. Iron oxides from host rocks and hematite mineralisation are responsible for local enrichments of iron, antimony, arsenic and molybdenum in panned concentrates

Lorentz-covariant deformed algebra with minimal length

The $D$-dimensional two-parameter deformed algebra with minimal length introduced by Kempf is generalized to a Lorentz-covariant algebra describing a ($D+1$)-dimensional quantized space-time. For D=3, it includes Snyder algebra as a special case. The deformed Poincar\'e transformations leaving the algebra invariant are identified. Uncertainty relations are studied. In the case of D=1 and one nonvanishing parameter, the bound-state energy spectrum and wavefunctions of the Dirac oscillator are exactly obtained.Comment: 8 pages, no figure, presented at XV International Colloquium on Integrable Systems and Quantum Symmetries (ISQS-15), Prague, June 15-17, 200

Thinking about growth : a cognitive mapping approach to understanding small business development

School of Managemen