956 research outputs found

    Lower limb stiffness estimation during running: the effect of using kinematic constraints in muscle force optimization algorithms

    Get PDF
    The focus of this paper is on the effect of muscle force optimization algorithms on the human lower limb stiffness estimation. By using a forward dynamic neuromusculoskeletal model coupled with a muscle short-range stiffness model we computed the human joint stiffness of the lower limb during running. The joint stiffness values are calculated using two different muscle force optimization procedures, namely: Toque-based and Torque/Kinematic-based algorithm. A comparison between the processed EMG signal and the corresponding estimated muscle forces with the two optimization algorithms is provided. We found that the two stiffness estimates are strongly influenced by the adopted algorithm. We observed different magnitude and timing of both the estimated muscle forces and joint stiffness time profile with respect to each gait phase, as function of the optimization algorithm used

    New Insights into Uniformly Accelerated Detector in a Quantum Field

    Get PDF
    We obtained an exact solution for a uniformly accelerated Unruh-DeWitt detector interacting with a massless scalar field in (3+1) dimensions which enables us to study the entire evolution of the total system, from the initial transient to late-time steady state. We find that the Unruh effect as derived from time-dependent perturbation theory is valid only in the transient stage and is totally invalid for cases with proper acceleration smaller than the damping constant. We also found that, unlike in (1+1)D results, the (3+1)D uniformly accelerated Unruh-DeWitt detector in a steady state does emit a positive radiated power of quantum nature at late-times, but it is not connected to the thermal radiance experienced by the detector in the Unruh effect proper.Comment: 6 pages, invited talk given by SYL at the conference of International Association for Relativistic Dynamics (IARD), June 2006, Storrs, Connecticut, US

    Gate errors in solid state quantum computer architectures

    Full text link
    We theoretically consider possible errors in solid state quantum computation due to the interplay of the complex solid state environment and gate imperfections. In particular, we study two examples of gate operations in the opposite ends of the gate speed spectrum, an adiabatic gate operation in electron-spin-based quantum dot quantum computation and a sudden gate operation in Cooper pair box superconducting quantum computation. We evaluate quantitatively the non-adiabatic operation of a two-qubit gate in a two-electron double quantum dot. We also analyze the non-sudden pulse gate in a Cooper-pair-box-based quantum computer model. In both cases our numerical results show strong influences of the higher excited states of the system on the gate operation, clearly demonstrating the importance of a detailed understanding of the relevant Hilbert space structure on the quantum computer operations.Comment: 6 pages, 2 figure

    Investigation into the effect of beam shape on melt pool characteristics using analytical modelling

    Get PDF
    An established analytical model is used to simulate an extended laser beam. Multiple Gaussian sources are superimposed to form a rectangular beam and results are compared with a single circular Gaussian source model as well as experimental results from a high power diode laser with a rectangular beam. Melt depth, and melt pool profile and progression have been predicted by modelling which are compared with experimental results from melting of Inconel 625. The model produced is shown to give a reasonable prediction of melt pool shape and can be usefully employed to help optimise overlap required for laser surface processing applications. The value of absorptivity used in the model can be used as a fitting parameter to optimise the match between experimental and predicted results

    The expression profiles of ADME genes in human cancers and their associations with clinical outcomes

    Get PDF
    ADME genes are a group of genes that are involved in drug absorption, distribution, metabolism, and excretion (ADME). The expression profiles of ADME genes within tumours is proposed to impact on cancer patient survival; however, this has not been systematically examined. In this study, our comprehensive analyses of pan-cancer datasets from the Cancer Genome Atlas (TCGA) revealed di erential intratumoral expression profiles for ADME genes in 21 di erent cancer types. Most genes also showed high interindividual variability within cancer-specific patient cohorts. Using Kaplan-Meier plots and logrank tests, we showed that intratumoral expression levels of twenty of the thirty-two core ADME genes were associated with overall survival (OS) in these cancers. Of these genes, five showed significant association with unfavourable OS in three cancers, including SKCM (ABCC2, GSTP1), KIRC (CYP2D6, CYP2E1), PAAD (UGT2B7); sixteen showed significant associations with favourable OS in twelve cancers, including BLCA (UGT2B15), BRCA (CYP2D6), COAD (NAT1), HNSC (ABCB1), KIRC (ABCG2, CYP3A4, SLC22A2, SLC22A6), KIRP (SLC22A2), LIHC (CYP2C19, CYP2C8, CYP2C9, CYP3A5, SLC22A1),LUAD(SLC15A2), LUSC (UGT1A1), PAAD (ABCB1), SARC (ABCB1), and SKCM (ABCB1, DYPD). Overall, these data provide compelling evidence supporting ADME genes as prognostic biomarkers and potential therapeutic targets. We propose that intratumoral expression of ADME genes may impact cancer patient survival by multiple mechanisms that can include metabolizing/transporting anticancer drugs, activating anticancer drugs, and metabolizing/transporting a variety of endogenous molecules involved in metabolically fuelling cancer cells and/or controlling pro-growth signalling pathways.Dong Gui Hu, Peter I. Mackenzie, Pramod C. Nair, Ross A. McKinnon and Robyn Meec

    Soliton pair creation in classical wave scattering

    Full text link
    We study classical production of soliton-antisoliton pairs from colliding wave packets in (1+1)-dimensional scalar field model. Wave packets represent multiparticle states in quantum theory; we characterize them by energy E and particle number N. Sampling stochastically over the forms of wave packets, we find the entire region in (E,N) plane which corresponds to classical creation of soliton pairs. Particle number is parametrically large within this region meaning that the probability of soliton-antisoliton pair production in few-particle collisions is exponentially suppressed.Comment: 16 pages, 8 figures, journal version; misprint correcte

    Assessment and improvement of the sea ice processing for dissolved inorganic carbon analysis

    Get PDF
    Dissolved inorganic carbon (DIC) is an important parameter to characterize the biogeochemical processes in sea ice and across the ocean‐sea ice‐atmosphere interface. The main challenge in bulk sea ice processing for DIC analysis is to melt the ice core without exposure to the air, which otherwise might contaminate the sample. A common practice is to seal the ice core in a gas‐tight plastic bag and remove the air gently using a syringe or a hand pump. However, this procedure is time‐consuming and the uncertainty in DIC concentration processed in this way has not been fully accessed. In this study, we modified the method by using a vacuum sealer and evaluated this procedure by examining the impact of ice sample processing, biological activity, gaseous CO2 initially present in sea ice, and the presence of ikaite (CaCO3·6H2O) crystals. The results show that no loss or gain in DIC occurs during the evacuation and ice melting process and that it might not be necessary to pre‐poison the ice samples during the ice melting process. In addition, gaseous CO2 initially present in sea ice has a negligible impact on DIC analysis. If detectable ikaite crystals are present in sea ice, the measurement results should be referred to total inorganic carbon instead of DIC. The field test at Station Nord in Greenland demonstrates that the modified method is simple and quick to use even under the most remote and extreme environments

    Linear Response, Validity of Semi-Classical Gravity, and the Stability of Flat Space

    Get PDF
    A quantitative test for the validity of the semi-classical approximation in gravity is given. The criterion proposed is that solutions to the semi-classical Einstein equations should be stable to linearized perturbations, in the sense that no gauge invariant perturbation should become unbounded in time. A self-consistent linear response analysis of these perturbations, based upon an invariant effective action principle, necessarily involves metric fluctuations about the mean semi-classical geometry, and brings in the two-point correlation function of the quantum energy-momentum tensor in a natural way. This linear response equation contains no state dependent divergences and requires no new renormalization counterterms beyond those required in the leading order semi-classical approximation. The general linear response criterion is applied to the specific example of a scalar field with arbitrary mass and curvature coupling in the vacuum state of Minkowski spacetime. The spectral representation of the vacuum polarization function is computed in n dimensional Minkowski spacetime, and used to show that the flat space solution to the semi-classical Einstein equations for n=4 is stable to all perturbations on distance scales much larger than the Planck length.Comment: 22 pages: This is a significantly expanded version of gr-qc/0204083, with two additional sections and two new appendices giving a complete, explicit example of the semi-classical stability criterion proposed in the previous pape

    Quantum-Hall Quantum-Bits

    Get PDF
    Bilayer quantum Hall systems can form collective states in which electrons exhibit spontaneous interlayer phase coherence. We discuss the possibility of using bilayer quantum dot many-electron states with this property to create two-level systems that have potential advantages as quantum bits.Comment: 4 pages, 4 figures included, version to appear in Phys. Rev. B (Rapid Communications

    Accelerometer-Based Physical Activity Patterns and Associations with Outcomes among Individuals with Osteoarthritis

    Get PDF
    Background This study examined patterns of physical activity and associations with pain, function, fatigue, and sleep disturbance among individuals with knee or hip osteoarthritis. Methods Participants (n = 54) were enrolled in a telephone-based physical activity coaching intervention trial; all data were collected at baseline. Self-reported measures of pain and function (WOMAC [Western Ontario and McMaster Universities Osteoarthritis Index] subscales), fatigue (10-point numeric rating scale), and PROMIS (Patient-Reported Outcomes Information System) Sleep Disturbance were collected via telephone. Accelerometers were mailed to participants and were worn for at least 3 days. Proportion of time participants spent in sedentary behavior during the morning (from wake until 12:00 pm), afternoon (12:00 pm until 5:59 pm) and evening (6:00 pm until sleep) each day was averaged across all days of wear. Pearson correlations assessed associations between activity and self-reported measures. Results Participants spent a large proportion of time in sedentary behavior: 65.6% of mornings, 70.0% of afternoons, and 76.6% of evenings. Associations between proportion of time spent in sedentary behavior and reported outcomes were generally strongest in the afternoon, strongest for WOMAC function, and lowest for PROMIS Sleep Disturbance. In the evening hours, sedentary time was most strongly associated with fatigue. Conclusions Overall, findings stress the importance of reducing sedentary behavior among adults with osteoarthritis and suggest behavioral interventions may be strengthened by considering patients' within-day variation in symptoms and activity
    • 

    corecore