3,709 research outputs found
Technical note: Absorption aerosol optical depth components from AERONET observations of mixed dust plumes
© Author(s) 2019.Absorption aerosol optical depth (AAOD) as obtained from sun–sky photometer measurements provides a measure of the light-absorbing properties of the columnar aerosol loading. However, it is not an unambiguous aerosol-type-specific parameter, particularly if several types of absorbing aerosols, for instance black carbon (BC) and mineral dust, are present in a mixed aerosol plume. The contribution of mineral dust to total aerosol light absorption is particularly important at UV wavelengths. In this study we refine a lidar-based technique applied to the separation of dust and non-dust aerosol types for the use with Aerosol Robotic Network (AERONET) direct sun and inversion products. We extend the methodology to retrieve AAOD related to non-dust aerosol (AAODnd) and BC (AAODBC). We test the method at selected AERONET sites that are frequently affected by aerosol plumes that contain a mixture of Saharan or Asian mineral dust and biomass-burning smoke or anthropogenic pollution, respectively. We find that aerosol optical depth (AOD) related to mineral dust as obtained with our methodology is frequently smaller than coarse-mode AOD. This suggests that the latter is not an ideal proxy for estimating the contribution of mineral dust to mixed dust plumes. We present the results of the AAODBC retrieval for the selected AERONET sites and compare them to coincident values provided in the Copernicus Atmosphere Monitoring System aerosol reanalysis.We find that modelled and AERONET AAODBC are most consistent for Asian sites or at Saharan sites with strong local anthropogenic sources.Peer reviewe
Vertical variation of optical properties of mixed Asian dust/pollution plumes according to pathway of air mass transport over East Asia
© Author(s) 2015. This is an Open Access article made available under the terms of the Creative Commons Attribution License 3.0 https://creativecommons.org/licenses/by/3.0/We use five years (2009-2013) of multiwavelength Raman lidar measurements at Gwangju, South Korea (35.10° N, 126.53° E) for the identification of changes of optical properties of East Asian dust depending on its transport path over China. Profiles of backscatter and extinction coefficients, lidar ratios, and backscatter-related Ångström exponents (wavelength pair 355/532 nm) were measured at Gwangju. Linear particle depolarization ratios were used to identify East Asian dust layers. We used backward trajectory modeling to identify the pathway and the vertical position of dust-laden air masses over China during long-range transport. Most cases of Asian dust events can be described by the emission of dust in desert areas and subsequent transport over highly polluted regions of China. The Asian dust plumes could be categorized into two classes according to the height above ground at which these plumes were transported: (case I) the dust layers passed over China at high altitude levels (> 3 km) until arrival over Gwangju, and (case II) the Asian dust layers were transported near the surface and within the lower troposphere (< 3 km) over industrialized areas before they arrived over Gwangju. We find that the optical characteristics of these mixed Asian dust layers over Gwangju differ depending on their vertical position above ground over China and the change of height above ground during transport. The mean linear particle depolarization ratio was 0.21 ± 0.06 (at 532 nm), the mean lidar ratios were 52 ± 7 sr at 355 nm and 53 ± 8 sr at 532 nm, and the mean Ångström exponent was 0.74 ± 0.31 for case I. In contrast, plumes transported at lower altitudes (case II) showed low depolarization ratios (0.13 ± 0.04 at 532 nm), and higher lidar ratio (63 ± 9 sr at 355 nm and 62 ± 8 sr at 532 nm) and Ångström exponents (0.98 ± 0.51). These numbers show that the optical characteristics of mixed Asian plumes are more similar to optical characteristics of urban pollution. We find a decrease of the linear depolarization ratio of the mixed dust/pollution plume depending on transport time if the pollution layer traveled over China at low heights, i.e., below approximately 3 km above ground. In contrast, we do not find such a trend if the dust plumes traveled at heights above 3 km over China. We need a longer time series of lidar measurements in order to determine in a quantitative way the change of optical properties of dust with transport time.Peer reviewedFinal Published versio
Finite-size scaling theory for explosive percolation transitions
The finite-size scaling (FSS) theory for continuous phase transitions has
been useful in determining the critical behavior from the size dependent
behaviors of thermodynamic quantities. When the phase transition is
discontinuous, however, FSS approach has not been well established yet. Here,
we develop a FSS theory for the explosive percolation transition arising in the
Erd\H{o}s and R\'enyi model under the Achlioptas process. A scaling function is
derived based on the observed fact that the derivative of the curve of the
order parameter at the critical point diverges with system size in a
power-law manner, which is different from the conventional one based on the
divergence of the correlation length at . We show that the susceptibility
is also described in the same scaling form. Numerical simulation data for
different system sizes are well collapsed on the respective scaling functions.Comment: 5 pages, 5 figure
Observation of inhomogeneous domain nucleation in epitaxial Pb(Zr,Ti)O3 capacitors
We investigated domain nucleation process in epitaxial Pb(Zr,Ti)O3 capacitors
under a modified piezoresponse force microscope. We obtained domain evolution
images during polarization switching process and observed that domain
nucleation occurs at particular sites. This inhomogeneous nucleation process
should play an important role in an early stage of switching and under a high
electric field. We found that the number of nuclei is linearly proportional to
log(switching time), suggesting a broad distribution of activation energies for
nucleation. The nucleation sites for a positive bias differ from those for a
negative bias, indicating that most nucleation sites are located at
ferroelectric/electrode interfaces
Infrared Hall conductivity of NaCoO
We report infrared Hall conductivity of
NaCoO thin films determined from Faraday rotation angle
measurements. exhibits two types of hole
conduction, Drude and incoherent carriers. The coherent Drude carrier shows a
large renormalized mass and Fermi liquid-like behavior of Hall scattering rate,
. The spectral weight is suppressed and disappears at T
= 120K. The incoherent carrier response is centered at mid-IR frequency and
shifts to lower energy with increasing T. Infrared Hall constant is positive
and almost independent of temperature in sharp contrast with the dc-Hall
constant.Comment: 5 Pages, 5 Figures. Author list corrected in metadata only, paper is
unchange
Analytic study of the three-urn model for separation of sand
We present an analytic study of the three-urn model for separation of sand.
We solve analytically the master equation and the first-passage problem. We
find that the stationary probability distribution obeys the detailed balance
and is governed by the {\it free energy}. We find that the characteristic
lifetime of a cluster diverges algebraically with exponent 1/3 at the limit of
stability.Comment: 5pages, 4 figures include
In Situ deposition of YBCO high-T(sub c) superconducting thin films by MOCVD and PE-MOCVD
Metalorganic Chemical Vapor Deposition (MOCVD) offers the advantages of a high degree of compositional control, adaptability for large scale production, and the potential for low temperature fabrication. The capability of operating at high oxygen partial pressure is particularly suitable for in situ formation of high temperature superconducting (HTSC) films. Yttrium barium copper oxide (YBCO) thin films having a sharp zero-resistance transition with T( sub c) greater than 90 K and Jc approx. 10 to the 4th power A on YSZ have been prepared, in situ, at a substrate temperature of about 800 C. Moreover, the ability to form oxide films at low temperature is very desirable for device applications of HTSC materials. Such a process would permit the deposition of high quality HTSC films with a smooth surface on a variety of substrates. Highly c-axis oriented, dense, scratch resistant, superconducting YBCO thin films with mirror-like surfaces have been prepared, in situ, at a reduced substrate temperature as low as 570 C by a remote microwave-plasma enhanced metalorganic chemical vapor deposition (PE-MOCVD) process. Nitrous oxide was used as a reactant gas to generate active oxidizing species. This process, for the first time, allows the formation of YBCO thin films with the orthorhombic superconducting phase in the as-deposited state. The as-deposited films grown by PE-MOCVD show attainment of zero resistance at 72 K with a transition width of about 5 K. MOCVD was carried out in a commercial production scale reactor with the capability of uniform deposition over 100 sq cm per growth run. Preliminary results indicate that PE-MOCVD is a very attractive thin film deposition process for superconducting device technology
Epitaxial growth and the magnetic properties of orthorhombic YTiO3 thin films
High-quality YTiO3 thin films were grown on LaAlO3 (110) substrates at low
oxygen pressures (<10-8 Torr) using pulsed laser deposition. The in-plane
asymmetric atomic arrangements at the substrate surface allowed us to grow
epitaxial YTiO3 thin films, which have an orthorhombic crystal structure with
quite different a- and b-axes lattice constants. The YTiO3 film exhibited a
clear ferromagnetic transition at 30 K with a saturation magnetization of about
0.7 uB/Ti. The magnetic easy axis was found to be along the [1-10] direction of
the substrate, which differs from the single crystal easy axis direction, i.e.,
[001].Comment: 14 pages, 4 figure
- …