6,956 research outputs found

    An investigation into unsteady base bleed for drag reduction in bluff two-box SUVs

    Get PDF
    This paper discusses a preliminary investigation into the use of base bleed on a production SUV using CFD analysis. The paper shows the methods used in creating the computational model and conducting the analysis, and present the findings to date. The paper shows that the reduction in drag increases as the mass flow rate of air is increased when the flow is deflected at the outlet. By controlling the turbulent wake to the rear of the vehicle, it is shown in the paper that mass flow rates of under 2kg/s can reduce drag coefficient by 8.2% with an outlet on the side of the vehicle, and that a mass flow rate of under 1.5kg/s can reduce the drag coefficient by 10.7% for an outlet on the upper section of the rear of the vehicle. The paper also discusses the feasibility of base bleed being applied to a production vehicle

    Observational Tests and Predictive Stellar Evolution II: Non-standard Models

    Full text link
    We examine contributions of second order physical processes to results of stellar evolution calculations amenable to direct observational testing. In the first paper in the series (Young et al. 2001) we established baseline results using only physics which are common to modern stellar evolution codes. In the current paper we establish how much of the discrepancy between observations and baseline models is due to particular elements of new physics. We then consider the impact of the observational uncertainties on the maximum predictive accuracy achievable by a stellar evolution code. The sun is an optimal case because of the precise and abundant observations and the relative simplicity of the underlying stellar physics. The Standard Model is capable of matching the structure of the sun as determined by helioseismology and gross surface observables to better than a percent. Given an initial mass and surface composition within the observational errors, and no additional constraints for which the models can be optimized, it is not possible to predict the sun's current state to better than ~7%. Convectively induced mixing in radiative regions, seen in multidimensional hydrodynamic simulations, dramatically improves the predictions for radii, luminosity, and apsidal motions of eclipsing binaries while simultaneously maintaining consistency with observed light element depletion and turnoff ages in young clusters (Young et al. 2003). Systematic errors in core size for models of massive binaries disappear with more complete mixing physics, and acceptable fits are achieved for all of the binaries without calibration of free parameters. The lack of accurate abundance determinations for binaries is now the main obstacle to improving stellar models using this type of test.Comment: 33 pages, 8 figures, accepted for publication in the Astrophysical Journa

    Wall Adhesion and Constitutive Modelling of Strong Colloidal Gels

    Full text link
    Wall adhesion effects during batch sedimentation of strongly flocculated colloidal gels are commonly assumed to be negligible. In this study in-situ measurements of colloidal gel rheology and solids volume fraction distribution suggest the contrary, where significant wall adhesion effects are observed in a 110mm diameter settling column. We develop and validate a mathematical model for the equilibrium stress state in the presence of wall adhesion under both viscoplastic and viscoelastic constitutive models. These formulations highlight fundamental issues regarding the constitutive modeling of colloidal gels, specifically the relative utility and validity of viscoplastic and viscoelastic rheological models under arbitrary tensorial loadings. The developed model is validated against experimental data, which points toward a novel method to estimate the shear and compressive yield strength of strongly flocculated colloidal gels from a series of equilibrium solids volume fraction profiles over various column widths.Comment: 37 pages, 12 figures, submitted to Journal of Rheolog

    Low Mass Neutron Stars and the Equation of State of Dense Matter

    Get PDF
    Neutron-star radii provide useful information on the equation of state of neutron rich matter. Particularly interesting is the density dependence of the equation of state (EOS). For example, the softening of the EOS at high density, where the pressure rises slower than anticipated, could signal a transition to an exotic phase. However, extracting the density dependence of the EOS requires measuring the radii of neutron stars for a broad range of masses. A ``normal'' 1.4 solar mass neutron star has a central density of a few times nuclear-matter saturation density. In contrast, low mass (of the order of 0.5 solar masses) neutron stars have central densities near nuclear-matter saturation density so its radius provides information on the EOS at low density. Unfortunately, low-mass stars are rare because they may be hard to form. Instead, a precision measurement of nuclear radii on atomic nuclei may contain similar information. Indeed, we find a strong correlation between the neutron radius of 208Pb and the radius of a 0.5 solar-mass neutron star. Thus, the radius of such a neutron star can be inferred from a measurement of the the neutron radius of 208Pb. Comparing this value to the measured radius of a 1.4 solar-mass neutron star should provide the strongest constraint to date on the density dependence of the equation of state.Comment: 9 pages and 5 eps. figures (included

    Tomographic Separation of Composite Spectra. IX. The Massive Close Binary HD 115071

    Get PDF
    We present the first orbital elements for the massive close binary, HD 115071, a double-lined spectroscopic binary in a circular orbit with a period of 2.73135 +/- 0.00003 days. The orbital semiamplitudes indicate a mass ratio of M_2/M_1 = 0.58 +/- 0.02 and yet the stars have similar luminosities. We used a Doppler tomography algorithm to reconstruct the individual component optical spectra, and we applied well known criteria to arrive at classifications of O9.5 V and B0.2 III for the primary and secondary, respectively. We present models of the Hipparcos light curve of the ellipsoidal variations caused by the tidal distortion of the secondary, and the best fit model for a Roche-filling secondary occurs for an inclination of i = 48.7 +/- 2.1 degrees. The resulting masses are 11.6 +/- 1.1 and 6.7 +/- 0.7 solar masses for the primary and secondary, respectively, so that both stars are very overluminous for their mass. The system is one of only a few known semi-detached, Algol-type binaries that contain O-stars. We suggest that the binary has recently emerged from extensive mass transfer (possibly through a delayed contact and common envelope process).Comment: Submitted to Ap

    Radial Velocities of Six OB Stars

    Full text link
    We present new results from a radial velocity study of six bright OB stars with little or no prior measurements. One of these, HD 45314, may be a long-period binary, but the velocity variations of this Be star may be related to changes in its circumstellar disk. Significant velocity variations were also found for HD 60848 (possibly related to nonradial pulsations) and HD 61827 (related to wind variations). The other three targets, HD 46150, HD 54879, and HD 206183, are constant velocity objects, but we note that HD 54879 has Hα\alpha emission that may originate from a binary companion. We illustrate the average red spectrum of each target.Comment: Accepted for publication in PASP July 2007 issu

    The Long Period, Massive Binaries HD 37366 and HD 54662: Potential Targets for Long Baseline Optical Interferometry

    Full text link
    We present the results from an optical spectroscopic analysis of the massive stars HD 37366 and HD 54662. We find that HD 37366 is a double-lined spectroscopic binary with a period of 31.8187 +/- 0.0004 days, and HD 54662 is also a double lined binary with a much longer period of 557.8 +/- 0.3 days. The primary of HD 37366 is classified as O9.5 V, and it contributes approximately two-thirds of the optical flux. The less luminous secondary is a broad-lined, early B-type main-sequence star. Tomographic reconstruction of the individual spectra of HD 37366 reveals absorption lines present in each component, enabling us to constrain the nature of the secondary and physical characteristics of both stars. Tomographic reconstruction was not possible for HD 54662; however, we do present mean spectra from our observations that show that the secondary component is approximately half as bright as the primary. The observed spectral energy distributions (SEDs) were fit with model SEDs and galactic reddening curves to determine the angular sizes of the stars. By assuming radii appropriate for their classifications, we determine distance ranges of 1.4 - 1.9 and 1.2 - 1.5 kpc for HD 37366 and HD 54662, respectively.Comment: 27 pages, 8 figures, Accepted for publication in Ap

    Measurement of the CMS Magnetic Field

    Full text link
    The measurement of the magnetic field in the tracking volume inside the superconducting coil of the Compact Muon Solenoid (CMS) detector under construction at CERN is done with a fieldmapper designed and produced at Fermilab. The fieldmapper uses 10 3-D B-sensors (Hall probes) developed at NIKHEF and calibrated at CERN to precision 0.05% for a nominal 4 T field. The precise fieldmapper measurements are done in 33840 points inside a cylinder of 1.724 m radius and 7 m long at central fields of 2, 3, 3.5, 3.8, and 4 T. Three components of the magnetic flux density at the CMS coil maximum excitation and the remanent fields on the steel-air interface after discharge of the coil are measured in check-points with 95 3-D B-sensors located near the magnetic flux return yoke elements. Voltages induced in 22 flux-loops made of 405-turn installed on selected segments of the yoke are sampled online during the entire fast discharge (190 s time-constant) of the CMS coil and integrated offline to provide a measurement of the initial magnetic flux density in steel at the maximum field to an accuracy of a few percent. The results of the measurements made at 4 T are reported and compared with a three-dimensional model of the CMS magnet system calculated with TOSCA.Comment: 4 pages, 5 figures, 15 reference

    The yellow hypergiants HR 8752 and rho Cassiopeiae near the evolutionary border of instability

    Get PDF
    High-resolution near-ultraviolet spectra of the yellow hypergiants HR 8752 and rho Cassiopeiae indicate high effective temperatures placing both stars near the T_eff border of the ``yellow evolutionary void''. At present, the temperature of HR 8752 is higher than ever. For this star we found Teff=7900+-200 K, whereas rho Cassiopeiae has Teff=7300+-200 K. Both, HR 8752 and rho Cassiopeiae have developed strong stellar winds with Vinf ~ 120 km/s and Vinf ~ 100 km/s, respectively. For HR 8752 we estimate an upper limit for the spherically symmetric mass-loss of 6.7X10^{-6}M_solar/yr. Over the past decades two yellow hypergiants appear to have approached an evolutionary phase, which has never been observed before. We present the first spectroscopic evidence of the blueward motion of a cool super/hypergiant on the HR diagram.Comment: 13 pages including 3 figures. Accepted for publication in ApJ Letter
    • 

    corecore