Soft X-ray Emission from the Spiral Galaxy NGC 1313

The nearby barred spiral galaxy NGC 1313 has been observed with the PSPC instr- ument on board the ROSAT X-ray satellite. Ten individual sources are found. Three sources (X-1, X-2 and X-3 [SN~1978K]) are very bright (~10^40 erg/s) and are unusual in that analogous objects do not exist in our Galaxy. We present an X-ray image of NGC~1313 and \xray spectra for the three bright sources. The emission from the nuclear region (R ~< 2 kpc) is dominated by source X-1, which is located ~1 kpc north of the photometric (and dynamical) center of NGC~1313. Optical, far-infrared and radio images do not indicate the presence of an active galactic nucleus at that position; however, the compact nature of the \xray source (X-1) suggests that it is an accretion-powered object with central mass M >~ 10^3 Msun. Additional emission (L_X ~ 10^39 erg/s) in the nuclear region extends out to ~2.6 kpc and roughly follows the spiral arms. This emission is from 4 sources with luminosity of several x 10^38 erg/s, two of which are consistent with emission from population I sources (e.g., supernova remnants, and hot interstellar gas which has been heated by supernova remnants). The other two sources could be emission from population II sources (e.g., low-mass \xray binaries). The bright sources X-2 and SN~1978K are positioned in the southern disk of NGC~1313. X-2 is variable and has no optical counterpart brighter than 20.8 mag (V-band). It is likely that it is an accretion-powered object in NGC~1313. The type-II supernova SN~1978K (Ryder \etal 1993) has become extra- ordinarily luminous in X-rays $\sim$13 years after optical maximum.Comment: to appear in 10 Jun 1995 ApJ, 30 pgs uuencoded compressed postscript, 25 pgs of figures available upon request from colbert, whole preprint available upon request from Sandy Shrader ([email protected]), hopefully fixed unknown problem with postscript fil

A Deep ROSAT HRI Observation of NGC 1313

We describe a series of observations of NGC 1313 using the ROSAT HRI with a combined exposure time of 183.5 ksec. The observations span an interval between 1992 and 1998; the purpose of observations since 1994 was to monitor the X-ray flux of SN1978K, one of several luminous sources in the galaxy. No diffuse emission is detected in the galaxy to a level of ~1-2x10^37 ergs/s/arcmin^-2. A total of eight sources are detected in the summed image within the D_25 diameter of the galaxy. The luminosities of five of the eight range from \~6x10^37 to ~6x10^38 erg/s; these sources are most likely accreting X-ray binaries, similar to sources obseved in M31 and M33. The remaining three sources all emit above 10^39 erg/s. We present light curves of the five brightest sources. Variability is detected at the 99.9% level from four of these. We identify one of the sources as an NGC 1313 counterpart of a Galactic X-ray source. The light curve, though crudely sampled, most closely resembles that of a Galactic black hole candidate such as GX339-4, but with considerably higher peak X-ray luminosity. An additional seven sources lie outside of the D_25 diameter and are either foreground stars or background AGN.Comment: 18 pages, 9 figures; accepted AJ, scheduled for November 200

CP nonconservation in the leptonic sector

In this paper we use an exact method to impose unitarity on moduli of neutrino PMNS matrix recently determined, and show how one could obtain information on CP nonconservation from a limited experimental information. One suggests a novel type of global fit by expressing all theoretical quantities in terms of convention independent parameters: the Jarlskog invariant $J$ and the moduli $|U_{\alpha i}|$, able to resolve the positivity problem of $|U_{e 3}|$. In this way the fit will directly provide a value for $J$, and if it is different from zero it will prove the existence of CP violation in the available experimental data. If the best fit result, $|U_{e3}|^2<0$, from M. Maltoni {\em et al}, [New J.Phys. {\bf 6} (2004) 122] is confirmed, it will imply a new physics in the leptonic sector

Supernova Ejecta in the Youngest Galactic Supernova Remnant G1.9+0.3

G1.9+0.3 is the youngest known Galactic supernova remnant (SNR), with an estimated supernova (SN) explosion date of about 1900, and most likely located near the Galactic Center. Only the outermost ejecta layers with free-expansion velocities larger than about 18,000 km/s have been shocked so far in this dynamically young, likely Type Ia SNR. A long (980 ks) Chandra observation in 2011 allowed spatially-resolved spectroscopy of heavy-element ejecta. We denoised Chandra data with the spatio-spectral method of Krishnamurthy et al., and used a wavelet-based technique to spatially localize thermal emission produced by intermediate-mass elements (IMEs: Si and S) and iron. The spatial distribution of both IMEs and Fe is extremely asymmetric, with the strongest ejecta emission in the northern rim. Fe Kalpha emission is particularly prominent there, and fits with thermal models indicate strongly oversolar Fe abundances. In a localized, outlying region in the northern rim, IMEs are less abundant than Fe, indicating that undiluted Fe-group elements (including 56Ni) with velocities larger than 18,000 km/s were ejected by this SN. But in the inner west rim, we find Si- and S-rich ejecta without any traces of Fe, so high-velocity products of O-burning were also ejected. G1.9+0.3 appears similar to energetic Type Ia SNe such as SN 2010jn where iron-group elements at such high free-expansion velocities have been recently detected. The pronounced asymmetry in the ejecta distribution and abundance inhomogeneities are best explained by a strongly asymmetric SN explosion, similar to those produced in some recent 3D delayed-detonation Type Ia models.Comment: 6 pages, 3 figures, submitted to ApJ Letter

Nonuniform Expansion of the Youngest Galactic Supernova Remnant G1.9+0.3

We report measurements of X-ray expansion of the youngest Galactic supernova remnant, G1.9+0.3, using Chandra observations in 2007, 2009, and 2011. The measured rates strongly deviate from uniform expansion, decreasing radially by about 60% along the X-ray bright SE-NW axis from 0.84% +/- 0.06% per yr to 0.52% +/- 0.03% per yr. This corresponds to undecelerated ages of 120-190 yr, confirming the young age of G1.9+0.3, and implying a significant deceleration of the blast wave. The synchrotron-dominated X-ray emission brightens at a rate of 1.9% +/- 0.4% per yr. We identify bright outer and inner rims with the blast wave and reverse shock, respectively. Sharp density gradients in either ejecta or ambient medium are required to produce the sudden deceleration of the reverse shock or the blast wave implied by the large spread in expansion ages. The blast wave could have been decelerated recently by an encounter with a modest density discontinuity in the ambient medium, such as found at a wind termination shock, requiring strong mass loss in the progenitor. Alternatively, the reverse shock might have encountered an order-of-magnitude density discontinuity within the ejecta, such as found in pulsating delayed-detonation Type Ia models. We demonstrate that the blast wave is much more decelerated than the reverse shock in these models for remnants at ages similar to G1.9+0.3. Similar effects may also be produced by dense shells possibly associated with high-velocity features in Type Ia spectra. Accounting for the asymmetry of G1.9+0.3 will require more realistic 3D Type Ia models.Comment: 6 pages, 4 figures, accepted for publication in ApJ Letters, minor revision

An empirical study of the “prototype walkthrough”: a studio-based activity for HCI education

For over a century, studio-based instruction has served as an effective pedagogical model in architecture and fine arts education. Because of its design orientation, human-computer interaction (HCI) education is an excellent venue for studio-based instruction. In an HCI course, we have been exploring a studio-based learning activity called the prototype walkthrough, in which a student project team simulates its evolving user interface prototype while a student audience member acts as a test user. The audience is encouraged to ask questions and provide feedback. We have observed that prototype walkthroughs create excellent conditions for learning about user interface design. In order to better understand the educational value of the activity, we performed a content analysis of a video corpus of 16 prototype walkthroughs held in two HCI courses. We found that the prototype walkthrough discussions were dominated by relevant design issues. Moreover, mirroring the justification behavior of the expert instructor, students justified over 80 percent of their design statements and critiques, with nearly one-quarter of those justifications having a theoretical or empirical basis. Our findings suggest that PWs provide valuable opportunities for students to actively learn HCI design by participating in authentic practice, and provide insight into how such opportunities can be best promoted

XMM-Newton discovery of transient X-ray pulsar in NGC 1313

We report on the discovery and analysis of the transient X-ray pulsar XMMU J031747.5-663010 detected in the 2004 November 23 XMM-Newton observation of the spiral galaxy NGC 1313. The X-ray source exhibits pulsations with a period P~765.6 s and a nearly sinusoidal pulse shape and pulsed fraction ~38% in the 0.3-7 keV energy range. The X-ray spectrum of XMMU J031747.5-663010 is hard and is well fitted with an absorbed simple power law of photon index ~1.5 in the 0.3-7 keV energy band. The X-ray properties of the source and the absence of an optical/UV counterpart brighter than 20 mag allow us to identify XMMU J031747.5-663010 as an accreting X-ray pulsar located in NGC 1313. The estimated absorbed 0.3-7 keV luminosity of the source L~1.6\times 10^{39} ergs/s, makes it one of the brightest X-ray pulsars known. Based on the relatively long pulse period and transient behaviour of the source, we classify it as a Be binary X-ray pulsar candidate. XMMU J031747.5-663010 is the second X-ray pulsar detected outside the Local Group, after transient 18 s pulsating source CXOU J073709.1+653544 discovered in the nearby spiral galaxy NGC 2403.Comment: 6 pages, 4 figures. Accepted for publication in MNRAS. Updated to match the accepted versio

G65.2+5.7: A Thermal Composite Supernova Remnant With a Cool Shell

This paper presents archival ROSAT PSPC observations of the G65.2+5.7 supernova remnant (also known as G65.3+5.7). Little material obscures this remnant and so it was well observed, even at the softest end of ROSAT's bandpass (~0.11 to 0.28 keV). These soft X-ray images reveal the remnant's centrally-filled morphology which, in combination with existing radio frequency observations, places G65.2+5.7 in the thermal composite (mixed morphology) class of supernova remnants. Not only might G65.2+5.7 be the oldest known thermal composite supernova remnant, but owing to its optically revealed cool, dense shell, this remnant supports the proposal that thermal composite supernova remnants lack X-ray bright shells because they have evolved beyond the adiabatic phase. These observations also reveal a slightly extended point source centered on RA = 19h 36m 46s, dec = 30deg 40' 07'' and extending 6.5 arcmin in radius in the band 67 map. The source of this emission has yet to be discovered, as there is no known pulsar at this location.Comment: In AASTEX preprint form, document is 12 pages long and includes 3 figure file

A Broadband X-Ray Study of the Supernova Remnant 3C 397

We present an X-ray study of the radio bright supernova remnant (SNR) 3C 397 with ROSAT, ASCA, and RXTE. A central X-ray spot seen with the ROSAT High-Resolution Imager hints at the presence of a pulsar-powered component, and gives this SNR a composite X-ray morphology. Combined ROSAT and ASCA imaging show that the remnant is highly asymmetric, with its hard X-ray emission peaking at the western lobe. The spectrum of 3C 397 is heavily absorbed, and dominated by thermal emission with emission lines evident from Mg, Si, S, Ar and Fe. Single-component models fail to describe the spectrum, and at least two components are required. We use a set of non-equilibrium ionization (NEI) models (Borkowski et al. in preparation). The temperatures from the soft and hard components are 0.2 keV and 1.6 keV respectively. The corresponding ionization time-scales $n_0 t$ ($n_0$ being the pre-shock hydrogen density) are 6 $\times 10^{12}$ cm$^{-3}$ s and 6 $\times$ 10$^{10}$ cm$^{-3}$ s, respectively. The spectrum obtained with the Proportional Counter Array (PCA) of RXTE is contaminated by emission from the Galactic ridge, with only $\sim$ 15% of the count rate originating from 3C 397 in the 5-15 keV range. The PCA spectrum allowed us to confirm the thermal nature of the hard X-ray emission. A third component originating from a pulsar-driven component is possible, but the contamination of the source signal by the Galactic ridge did not allow us to find pulsations from any hidden pulsar. We discuss the X-ray spectrum in the light of two scenarios: a young ejecta-dominated remnant of a core-collapse SN, and a middle-aged SNR expanding in a dense ISM. Spatially resolved spectroscopy (with CHANDRA and XMM) is needed to differentiate between the two scenarios, and address the nature of the mysterious radio-quiet X-ray hot spot.Comment: 21 pages including 8 figures and 5 tables. Accepted for publication in the Astrophysical journa

THE IMPACT OF USING EQUIPMENT WITH DIGITAL CONTROL ON MODERN AGRICULTURE 4.0 - REVIEW

Lately, the widespread use and continuous improvement of machine tools has had a significant impact on productivity in the manufacturing industry since the Industrial Revolution. At the beginning of the new era of industrialization, the need to advance machine tools to a new level, which corresponds to the Industry 4.0 concept, must be recognized and addressed. Like the various stages of industrialization, machine tools have also gone through various stages of technological advances, namely Machine Tool 1.0, Machine Tool 2.0 and Machine Tool 3.0. Industry 4.0 advocates for a new generation of machines - Machine Tool 4.0. This paper describes some of the key and desired features of the implementation of intelligent machines such as numerically controlled lathes and milling machine tool centers integrated vertically and horizontally in order to achieve a modern, intelligent, autonomous and safer agriculture