FORTRAN program for computing coordinates of circular-arc, single and tandem, turbine and compressor, blade sections on a plane

Coordinates for circular arc blade section of aircraft high speed compressor gas turbines were computed using FORTRAN 4 program. Aerodynamic configurations studied include single segment airfoils, airfoils with slots, and mutiple segment tandem arranged airfoil

Stoichiometry control of sputtered CuCl thin films: Influence on ultraviolet emission properties

We demonstrate that the chemical composition of the sputtered CuCl thin films could be finely controlled by adjusting the bias to the substrate. The films deposited without any intentional bias were Cl rich (CuCl1+x), a bias of −22 V yielded stoichiometric CuCl, and a further increase in the negative bias resulted in Cl deficient films (CuCl1−x). The crystalline and optical properties were found to be associated with the chemical composition. Cl rich films showed a deep level green emission at around 515 nm in addition to ultraviolet (UV) excitonic emission. The stoichiometric films have higher optical quality, exhibiting a sharp UV emission at around 385 nm at room temperature, compared to nonstoichiometric samples. Visible luminescence related to deep level defects was not observed in the stoichiometric films. Changes in energy of the flux from the target and the subsequent ion bombardment on the substrate surface are correlated with the variations in chemical composition and their impact on the film microstructure and UV emission

Short-term effects of deep ploughing on soil C stocks following renewal of a dairy pasture in New Zealand

In New Zealand’s high producing permanent pastures the topsoil constitutes a large reservoir of soil organic carbon (SOC), which shows a marked stratification with depth. As consequence, sub-surface layers can contain 10 times less carbon than the surface soil. In permanent pastures with high carbon inputs, the formation and decomposition of these surface SOC stocks are often at equilibrium and C storage shows little change over time. Pastoral based dairy systems utilising ryegrass plus clover cultivars require renewal every 7-10 years to avoid reversion to less productive grasses. This may involve spring cultivation (either no-till, shallow till or full cultivation), summer forage cropping and autumn re-grassing. It has been hypothesised that SOC stocks can be increased by inverting the soil profile at pasture renewal through infrequent (once in 25-30 years) deep mouldboard ploughing (up to 30 cm depth). Increased C sequestration occurs when the new grass quickly rebuilds SOC stocks in the new topsoil (exposed low C sub-soil) at a rate faster than the decomposition of SOC in the rich former topsoil transferred to depth (now below 15 cm). However, benefits form accelerated C storage may be offset if crop and pasture production is adversely affected by the ploughing event (e.g., as result of compaction or excessive drainage). Hence, the aim of this work was to assess the short-term effects of infrequent inversion tillage of long-term New Zealand pastoral-based dairy soils under summer crop management and autumn re-grassing. An imperfectly drained Typic Fragiaqualf under dairy grazing was deep ploughed (approx. 25 cm) and re-sown with turnip in October 2016; other treatments included were shallow (< 10 cm) cultivation and no-till. The site was core sampled (0-40 cm) before cultivation and after 5 months of turnip growth to assess changes in SOC. Plant growth, herbage quality, and nutrient leaching were monitored during the 5-month period; root growth was assessed at the end of the crop rotation. Full cultivation transferred SOC below 10 cm depth, as expected. Soil bulk density decreased whereas root mass increased (10-20 cm depth; P < 0.05) under deep cultivation only. Besides, losses of mineral N were attenuated under deep tillage, resulting in a relative increase in crop yield. The potential for infrequent inversion tillage increasing soil C sequestration as a greenhouse gas (GHG) mitigation tool is currently being tested at other sites in New Zealand

Advancing the digital and computational capabilities of healthcare providers: A qualitative study of a hospital organisation in the NHS

Objective: Healthcare systems require transformation to meet societal challenges and projected health demands. Digital and computational tools and approaches are fundamental to this transformation, and hospitals have a key role to play in their development and implementation. This paper reports on a study with the objective of exploring the challenges encountered by hospital leaders and innovators as they implement a strategy to become a data-driven hospital organisation. In doing so, this paper provides guidance to future leaders and innovators seeking to build computational and digital capabilities in complex clinical settings. Methods: Interviews were undertaken with 42 participants associated with a large public hospital organisation within England's National Health Service. Using the concept of institutional readiness as an analytical framework, the paper explores participants’ perspectives on the organisation's capacity to support the development of, and benefit from, digital and computational approaches. Results: Participants’ accounts reveal a range of specific institutional readiness criteria relating to organisational vision, technical capability, organisational agility, and talent and skills that, when met, enhance the organisations’ capacity to support the development and implementation of digital and computational tools. Participant accounts also reveal challenges relating to these criteria, such as unrealistic expectations and the necessary prioritisation of clinical work in resource-constrained settings. Conclusions: The paper identifies a general set of institutional readiness criteria that can guide future hospital leaders and innovators aiming to improve their organisation's digital and computational capability. The paper also illustrates the challenges of pursuing digital and computational innovation in resource-constrained hospital environments

Doping Evolution of Magnetic Order and Magnetic Excitations in (Sr1−x_{1-x}Lax_x)3_3Ir2_2O7_7

We use resonant elastic and inelastic X-ray scattering at the Ir-$L_3$ edge to study the doping-dependent magnetic order, magnetic excitations and spin-orbit excitons in the electron-doped bilayer iridate (Sr$_{1-x}$La$_{x}$)$_3$Ir$_2$O$_7$ ($0 \leq x \leq 0.065$). With increasing doping $x$, the three-dimensional long range antiferromagnetic order is gradually suppressed and evolves into a three-dimensional short range order from $x = 0$ to $0.05$, followed by a transition to two-dimensional short range order between $x = 0.05$ and $0.065$. Following the evolution of the antiferromagnetic order, the magnetic excitations undergo damping, anisotropic softening and gap collapse, accompanied by weakly doping-dependent spin-orbit excitons. Therefore, we conclude that electron doping suppresses the magnetic anisotropy and interlayer couplings and drives (Sr$_{1-x}$La$_x$)$_3$Ir$_2$O$_7$ into a correlated metallic state hosting two-dimensional short range antiferromagnetic order and strong antiferromagnetic fluctuations of $J_{\text{eff}} = \frac{1}{2}$ moments, with the magnon gap strongly suppressed.Comment: 6 Pages, 3 Figures, with supplementary in Sourc

Resolving the nature of electronic excitations in resonant inelastic x-ray scattering

The study of elementary bosonic excitations is essential toward a complete description of quantum electronic solids. In this context, resonant inelastic X-ray scattering (RIXS) has recently risen to becoming a versatile probe of electronic excitations in strongly correlated electron systems. The nature of the radiation-matter interaction endows RIXS with the ability to resolve the charge, spin and orbital nature of individual excitations. However, this capability has been only marginally explored to date. Here, we demonstrate a systematic method for the extraction of the character of excitations as imprinted in the azimuthal dependence of the RIXS signal. Using this novel approach, we resolve the charge, spin, and orbital nature of elastic scattering, (para-)magnon/bimagnon modes, and higher energy dd excitations in magnetically-ordered and superconducting copper-oxide perovskites (Nd2CuO4 and YBa2Cu3O6.75). Our method derives from a direct application of scattering theory, enabling us to deconstruct the complex scattering tensor as a function of energy loss. In particular, we use the characteristic tensorial nature of each excitation to precisely and reliably disentangle the charge and spin contributions to the low energy RIXS spectrum. This procedure enables to separately track the evolution of spin and charge spectral distributions in cuprates with doping. Our results demonstrate a new capability that can be integrated into the RIXS toolset, and that promises to be widely applicable to materials with intertwined spin, orbital, and charge excitations

Evaluational adjectives

This paper demarcates a theoretically interesting class of "evaluational adjectives." This class includes predicates expressing various kinds of normative and epistemic evaluation, such as predicates of personal taste, aesthetic adjectives, moral adjectives, and epistemic adjectives, among others. Evaluational adjectives are distinguished, empirically, in exhibiting phenomena such as discourse-oriented use, felicitous embedding under the attitude verb `find', and sorites-susceptibility in the comparative form. A unified degree-based semantics is developed: What distinguishes evaluational adjectives, semantically, is that they denote context-dependent measure functions ("evaluational perspectives")—context-dependent mappings to degrees of taste, beauty, probability, etc., depending on the adjective. This perspective-sensitivity characterizing the class of evaluational adjectives cannot be assimilated to vagueness, sensitivity to an experiencer argument, or multidimensionality; and it cannot be demarcated in terms of pretheoretic notions of subjectivity, common in the literature. I propose that certain diagnostics for "subjective" expressions be analyzed instead in terms of a precisely specified kind of discourse-oriented use of context-sensitive language. I close by applying the account to `find x PRED' ascriptions

The ADAM environment and transputers

The ADAM environment is both used for data analysis by Starlink and for data acquisition by the UK-involved observatories in Australia, Hawaii, and the Canary Islands. ADAM was originally hosted under VAX/VMS but is now at an advanced stage of a Unix port. ADAM comprises a parameter system, hierarchical data system, noticeboard system, error handling system, and other components. Originally a multi-tasking single processor environment, it has been enhanced to a multiprocessor environment using local or wide area networking. The Royal Observatory Edinburgh is producing a transputer version of the ADAM kernel to allow instruments which make use of transputers for data acquisition/control to integrate more closely with the ADAM software running at the telescopes. Communication into the transputer system is based on Ethernet carrying TCP/IP, which eases development toward a network of mixed VMS/Unix/transputer Telescope systems. The transputer system is being applied to instruments under development for the UKIRT and JCMT telescopes