Sound insulation design of modular construction housing

This paper provides an insight into the acoustic issues of modular housing using the Verbus System of construction. The paper briefly summarises the history of the development of Verbus modular housing and the acoustic design considerations of the process. Results are presented from two sound insulation tests conducted during the course of the project. The results are discussed in terms of compliance with Approved Document E1 and increased performance standards such as EcoHomes2

A DECISION MODEL TO ASSESS CATTLE FEEDING PRICE RISK

Traditional break-even/fed cattle price projections do not provide adequate risk information to feeders, investors, lenders, and other stakeholders interested in cattle feeding decisions. The objectives of this study were two-fold: 1) develop a spreadsheet model that could estimate the net income distribution surrounding a cattle placement decision based on historical errors of futures based price forecasts, and 2) determine whether information generated from the model can be used to improve placement and marketing decisions. To accomplish objective 1, model was developed that could estimate the income distribution around a pen of cattle under a cash speculating and short hedge pricing strategy. Distribution estimates were based on 7 alternative forecast horizons and were derived from historical forecast errors. To accomplish objective 2, decision rules were developed that allow the feeder to specify the maximum probability he/she is willing to risk losing a specified level of income. These decision rules were compared to random and naive decision rules by simulating the outcomes over 168 discrete six months feeding periods between 1987 and 2000. Risk averse decision rules were successful in signaling highly unprofitable feeding periods, but also filtered out highly profitable feeding periods.Livestock Production/Industries, Marketing,

Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic

Differences in the beam interaction characteristics of a CO2 laser, a Nd:YAG laser, a high power diode laser (HPDL) and an excimer laser with a partially stabilised zirconia (PSZ) bio-ceramic have been studied. A derivative of Beer-Lambert’s law was applied and the laser beam absorption lengths of the four lasers were calculated as 33.55 x 10-3 cm for the CO2 laser, 18.22 x 10-3 cm for the Nd:YAG laser, 17.17 x 10-3 cm for the HPDL and 8.41 x 10-6 cm for the excimer laser. It was determined graphically that the fluence threshold values at which significant material removal was effected by the CO2 laser, the Nd:YAG laser, the HPDL and the excimer laser were 52 J/cm2, 97 J/cm2, 115 J/cm2 and 0.48 J/cm2 respectively. The thermal loading value for the CO2 laser, the Nd:YAG laser, the HPDL and the excimer laser were calculated as being 1.55 kJ/cm3, 5.32 kJ/cm3, 6.69 kJ/cm3 and 57.04 kJ/cm3 respectively

Evidence for the Multiverse in the Standard Model and Beyond

In any theory it is unnatural if the observed parameters lie very close to special values that determine the existence of complex structures necessary for observers. A naturalness probability, P, is introduced to numerically evaluate the unnaturalness. If P is small in all known theories, there is an observer naturalness problem. In addition to the well-known case of the cosmological constant, we argue that nuclear stability and electroweak symmetry breaking (EWSB) represent significant observer naturalness problems. The naturalness probability associated with nuclear stability is conservatively estimated as P_nuc < 10^{-(3-2)}, and for simple EWSB theories P_EWSB < 10^{-(2-1)}. This pattern of unnaturalness in three different arenas, cosmology, nuclear physics, and EWSB, provides evidence for the multiverse. In the nuclear case the problem is largely solved even with a flat multiverse distribution, and with nontrivial distributions it is possible to understand both the proximity to neutron stability and the values of m_e and m_d - m_u in terms of the electromagnetic contribution to the proton mass. It is reasonable that multiverse distributions are strong functions of Lagrangian parameters due to their dependence on various factors. In any EWSB theory, strongly varying distributions typically lead to a little or large hierarchy, and in certain multiverses the size of the little hierarchy is enhanced by a loop factor. Since the correct theory of EWSB is unknown, our estimate for P_EWSB is theoretical. The LHC will determine P_EWSB more robustly, which may remove or strengthen the observer naturalness problem of EWSB. For each of the three arenas, the discovery of a natural theory would eliminate the evidence for the multiverse; but in the absence of such a theory, the multiverse provides a provisional understanding of the data.Comment: 79 pages, 23 figure

The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system

As the field of laser materials processing becomes ever more diverse, the high power diode laser (HPDL) is now being regarded by many as the most applicable tool. The commercialisation of an industrial epoxy grout removal and single-stage ceramic tile grout sealing process is examined through the development of a hand-held HPDL device in this work. Further, an appraisal of the potential hazards associated with the use of the HPDL in an industrial environment and the solutions implemented to ensure that the system complies with the relevant safety standards are given. The paper describes the characteristics and feasibility of the industrial epoxy grout removal process. A minimum power density of approximately 3 kW/cm2 was found to exist, whilst the minimum interaction time, below which there was no removal of epoxy tile grout, was found to be approximately 0.5 s. The maximum theoretical removal rate that may be achievable was calculated as being 65.98 mm2/s for a circular 2 mm diameter beam with a power density of 3 kW/cm2 and a traverse speed of 42 mm/s. In addition, the characteristics of the single-stage ceramic tile grout sealing are outlined. The single-stage ceramic tile grout sealing process yielded crack and porosity free seals which were produced in normal atmospheric conditions. Tiles were successfully sealed with power densities as low as 550 W/cm2 and at rates of up to 420 mm/min. In terms of mechanical, physical and chemical characteristics, the single-stage ceramic tile grout was found to be far superior to the conventional epoxy tile grout and, in many instances, matched and occasionally surpassed that of the ceramic tiles themselves

Hydration and mobility of HO-(aq)

The hydroxide anion plays an essential role in many chemical and biochemical reactions. But a molecular-scale description of its hydration state, and hence also its transport, in water is currently controversial. The statistical mechanical quasi-chemical theory of solutions suggests that HO[H2O]3- is the predominant species in the aqueous phase under standard conditions. This result is in close agreement with recent spectroscopic studies on hydroxide water clusters, and with the available thermodynamic hydration free energies. In contrast, a recent ab initio molecular dynamics simulation has suggested that HO[H_2O]4- is the only dominant aqueous solution species. We apply adiabatic ab initio molecular dynamics simulations, and find good agreement with both the quasi-chemical theoretical predictions and experimental results. The present results suggest a picture that is simpler, more traditional, but with additional subtlety. These coordination structures are labile but the tri-coordinate species is the prominent case. This conclusion is unaltered with changes in the electronic density functional. No evidence is found for rate-determining activated inter-conversion of a HO[H2O]4- trap structure to HO[H2O]3-, mediating hydroxide transport. The view of HO- diffusion as the hopping of a proton hole has substantial validity, the rate depending largely on the dynamic disorder of the water hydrogen-bond network.Comment: 7 pages, 5 figures, additional results include

Issues, concerns, and initial implementation results for space based telerobotic control

Telerobotic control for space based assembly and servicing tasks presents many problems in system design. Traditional force reflection teleoperation schemes are not well suited to this application, and the approaches to compliance control via computer algorithms have yet to see significant testing and comparison. These observations are discussed in detail, as well as the concerns they raise for imminent design and testing of space robotic systems. As an example of the detailed technical work yet to be done before such systems can be specified, a particular approach to providing manipulator compliance is examined experimentally and through modeling and analysis. This yields some initial insight into the limitations and design trade-offs for this class of manipulator control schemes. Implications of this investigation for space based telerobots are discussed in detail

ASSESSING THE COST OF BEEF QUALITY

The number of U.S. fed cattle marketed through a value based or grid marketing system is increasing dramatically. Most grids reward Choice or better quality grades and some pay premiums for red meat yield. The Choice-Select (C-S) price spread increased 55 percent, over $3/cwt between 1989-91 and 1999-01. However, there is a cost associated with pursuing these carcass premiums. This paper examines these tradeoffs both in the feedlot and in a retained ownership scenario. Correlations between carcass and performance traits resulted in economic tradeoffs that change across input costs and quality grade premiums and discounts. Feedlot profitability was largely determined by marbling, carcass weight, and feed efficiency. Carcass weight was most important at a low C-S spread. However, at average C-S spread and higher, marbling became the largest determinate of feedlot profits, and its importance increased with the C-S spread. Carcass weight and feed efficiency influence on feedlot profitability declined at higher C-S spreads. Rib-eye area was the fourth most important variable and declined in importance as marbling increased in importance. There is some indication that cows with lower feed costs also produce the most profitable calf for the feedlot, and vice-versa. The data suggests that cow size and marbling score are negatively correlated. The current trend toward wider C-S spreads and rewarding higher quality grading cattle places greater emphasis on marbling ability of calves. These correlations and results suggest that higher marbling is associated with lower cost cows to maintain.Livestock Production/Industries, Marketing,