Spin-3/2 physics of semiconductor hole nanowires: Valence-band mixing and tunable interplay between bulk-material and orbital bound-state spin splittings

We present a detailed theoretical study of the electronic spectrum and Zeeman splitting in hole quantum wires. The spin-3/2 character of the topmost bulk-valence-band states results in a strong variation of subband-edge g factors between different subbands. We elucidate the interplay between quantum confinement and heavy-hole - light-hole mixing and identify a certain robustness displayed by low-lying hole-wire subband edges with respect to changes in the shape or strength of the wire potential. The ability to address individual subband edges in, e.g., transport or optical experiments enables the study of holes states with nonstandard spin polarization, which do not exist in spin-1/2 systems. Changing the aspect ratio of hole wires with rectangular cross-section turns out to strongly affect the g factor of subband edges, providing an opportunity for versatile in-situ tuning of hole-spin properties with possible application in spintronics. The relative importance of cubic crystal symmetry is discussed, as well as the spin splitting away from zone-center subband edges.Comment: 16 pages, 12 figures, RevTe

Origins of conductance anomalies in a p-type GaAs quantum point contact

Low temperature transport measurements on a p-GaAs quantum point contact are presented which reveal the presence of a conductance anomaly that is markedly different from the conventional `0.7 anomaly'. A lateral shift by asymmetric gating of the conducting channel is utilized to identify and separate different conductance anomalies of local and generic origins experimentally. While the more generic 0.7 anomaly is not directly affected by changing the gate configuration, a model is proposed which attributes the additional conductance features to a gate-dependent coupling of the propagating states to localized states emerging due to a nearby potential imperfection. Finite bias conductivity measurements reveal the interplay between the two anomalies consistently with a two-impurity Kondo model

Lande-like formula for the g factors of hole-nanowire subband edges

We have analyzed theoretically the Zeeman splitting of hole-quantum-wire subband edges. As is typical for any bound state, their g factor depends on both an intrinsic g factor of the material and an additional contribution arising from a finite bound-state orbital angular momentum. We discuss the quantum-confinement-induced interplay between bulk-material and orbital effects, which is nontrivial due to the presence of strong spin-orbit coupling. A compact analytical formula is provided that elucidates this interplay and can be useful for predicting Zeeman splitting in generic hole-wire geometries.Comment: 4 pages, 2 figure

A Comparison Of Hip And Knee Joint Kinematics Between Two Alpine Ski Ergometers

This study was conducted to determine if hip and knee joint kinematics differed between conditions as subjects "skied" on two alpine ski ergometers. Eleven male recreational skiers, ages 18-23, participated in the study. During the random test, sagittal plane motions of the hip and knee joints were videotaped as subjects skied on each ski ergometer at a slow speed (92 turns/minute) and a fast speed (102 turns/minute). Each subject was vid.eotaped at 30 frames per second during the last thirty seconds of a two minute exercise bout. Three turns were randomly selected and digitized on the Ariel Performance Analysis System (APAS). Relative angular displacements of the left hip and knee were measured and compared. Hip and knee flexion were significantly different between the two ergometers at the fast speed. A comparison of the fast and slow trials revealed that subjects were able to achieve more knee flexion at the fast speed on one ergometer. However, on the other ergometer, the degree of knee flexion was greater at the slow speed. How closely the two ski ergometers simulate actual downhill skiing is unknown and warrants further investigation

Magnetic and Transport Properties of Fe-Ag granular multilayers

Results of magnetization, magnetotransport and Mossbauer spectroscopy measurements of sequentially evaporated Fe-Ag granular composites are presented. The strong magnetic scattering of the conduction electrons is reflected in the sublinear temperature dependence of the resistance and in the large negative magnetoresistance. The simultaneous analysis of the magnetic properties and the transport behavior suggests a bimodal grain size distribution. A detailed quantitative description of the unusual features observed in the transport properties is given

Evidence for localization and 0.7 anomaly in hole quantum point contacts

Quantum point contacts implemented in p-type GaAs/AlGaAs heterostructures are investigated by low-temperature electrical conductance spectroscopy measurements. Besides one-dimensional conductance quantization in units of $2e^{2}/h$ a pronounced extra plateau is found at about $0.7(2e^{2}/h)$ which possesses the characteristic properties of the so-called "0.7 anomaly" known from experiments with n-type samples. The evolution of the 0.7 plateau in high perpendicular magnetic field reveals the existence of a quasi-localized state and supports the explanation of the 0.7 anomaly based on self-consistent charge localization. These observations are robust when lateral electrical fields are applied which shift the relative position of the electron wavefunction in the quantum point contact, testifying to the intrinsic nature of the underlying physics.Comment: 4.2 pages, 3 figure

PVP2008-61205 NATURAL FLAW SHAPE DEVELOPMENT DUE TO STRESS CORROSION CRACKING

ABSTRACT Typical ASME Section XI subcritical cracking analyses assume an idealized flaw shape driven by stress intensity factors developed for semi-elliptical shaped flaws. Recent advanced finite element analyses (AFEA) conducted by both the US NRC and the nuclear industry for long circumferential indications found in the pressurizer nozzle dissimilar metal welds at the Wolf Creek power plant, suggest that the semielliptical flaw assumption may be overly conservative in some cases. The AFEA methodology that was developed allowed the progression of a planar flaw subjected to typical SCC-type growth laws by calculating stress intensity factors at every nodal point along the crack front, and incrementally advancing the crack front in a more natural manner. Typically crack growth analyses increment the semi-elliptical flaw by considering only the stress intensity factor at the deepest and surface locations along the crack front, while keeping the flaw shape semi-elliptical. In this paper, a brief background to the AFEA methodology and the analyses conducted in the Wolf Creek effort will be discussed. In addition, the natural behavior of surface cracks under normal operating conditions (plus welding residual stress) will be investigated and compared to the semi-elliptical assumption. Conclusions on the observation of when semi-elliptical flaw assumptions are appropriate will be made. These observations will add insight into the conservatism of using an idealized flaw shape assumption. INTRODUCTION In October 2006, circumferential indications were located by ultrasonic testing (UT) in three of the pressurizer nozzle dissimilar metal (DM) welds at the Wolf Creek nuclear power plant. The indications located were relatively long circumferential defects in Alloy 82/182 dissimilar metal welds. In one case the flaw was sized at 43% of the circumference and 26% deep. Using ASME Section XI type analyses, Emc 2 and NRC staff estimated the times to both leakage and rupture fo