Transmission loss predictions for dissipative silencers of arbitrary cross section in the presence of mean flow

A numerical technique is developed for the analysis of dissipative silencers of arbitrary, but axially uniform, cross section. Mean gas flow is included in a central airway which is separated from a bulk reacting porous material by a concentric perforate screen. The analysis begins by employing the finite element method to extract the eigenvalues and associated eigenvectors for a silencer of infinite length. Point collocation is then used to match the expanded acoustic pressure and velocity fields in the silencer chamber to those in the inlet and outlet pipes. Transmission loss predictions are compared with experimental measurements taken for two automotive dissipative silencers with elliptical cross sections. Good agreement between prediction and experiment is observed both without mean flow and for a mean flow Mach number of 0.15. It is demonstrated also that the technique presented offers a considerable reduction in computational expenditure when compared to a three dimensional finite element analysis

Spectral fluctuation characterization of random matrix ensembles through wavelets

A recently developed wavelet based approach is employed to characterize the scaling behavior of spectral fluctuations of random matrix ensembles, as well as complex atomic systems. Our study clearly reveals anti-persistent behavior and supports the Fourier power spectral analysis. It also finds evidence for multi-fractal nature in the atomic spectra. The multi-resolution and localization nature of the discrete wavelets ideally characterizes the fluctuations in these time series, some of which are not stationary.Comment: 7 pages, 2 eps figure

Evolution of an elliptical bubble in an accelerating extensional flow

Mathematical models that describe the dynamical behavior of a thin gas bubble embedded in a glass fiber during a fiber drawing process have been discussed and analyzed. The starting point for the mathematical modeling was the equations presented in [1] for a glass fiber with a hole undergoing extensional flow. These equations were reconsidered here with the additional reduction that the hole, i.e. the gas bubble, was thin as compared to the radius of the fiber and of finite extent. The primary model considered was one in which the mass of the gas inside the bubble was fixed. This fixed-mass model involved equations for the axial velocity and fiber radius, and equations for the radius of the bubble and the gas pressure inside the bubble. The model equations assumed that the temperature of the furnace of the drawing tower was known. The governing equations of the bubble are hyperbolic and predict that the bubble cannot extend beyond the limiting characteristics specified by the ends of the initial bubble shape. An analysis of pinch-off was performed, and it was found that pinch-off can occur, depending on the parameters of the model, due to surface tension when the bubble radius is small. In order to determine the evolution of a bubble, a numerical method of solution was presented. The method was used to study the evolution of two different initial bubble shapes, one convex and the other non-convex. Both initial bubble shapes had fore-aft symmetry, and it was found that the bubbles stretched and elongated severely during the drawing process. For the convex shape, fore-aft symmetry was lost in the middle of the drawing process, but the symmetry was re-gained by the end of the drawing tower. A small amount of pinch-off was observed at each end for this case, so that the final bubble length was slightly shorter than its theoretical maximum length. For the non-convex initial shape, pinch-off occurred in the middle of the bubble resulting in two bubbles by the end of the fiber draw. The two bubbles had different final pressures and did not have fore-aft symmetry. An extension of the fixed-mass model was considered in which the gas in the bubble was allowed to diffuse into the surrounding glass. The governing equations for this leaky-mass model were developed and manipulated into a form suitable for a numerical treatment

NEXUS/Physics: An interdisciplinary repurposing of physics for biologists

In response to increasing calls for the reform of the undergraduate science curriculum for life science majors and pre-medical students (Bio2010, Scientific Foundations for Future Physicians, Vision & Change), an interdisciplinary team has created NEXUS/Physics: a repurposing of an introductory physics curriculum for the life sciences. The curriculum interacts strongly and supportively with introductory biology and chemistry courses taken by life sciences students, with the goal of helping students build general, multi-discipline scientific competencies. In order to do this, our two-semester NEXUS/Physics course sequence is positioned as a second year course so students will have had some exposure to basic concepts in biology and chemistry. NEXUS/Physics stresses interdisciplinary examples and the content differs markedly from traditional introductory physics to facilitate this. It extends the discussion of energy to include interatomic potentials and chemical reactions, the discussion of thermodynamics to include enthalpy and Gibbs free energy, and includes a serious discussion of random vs. coherent motion including diffusion. The development of instructional materials is coordinated with careful education research. Both the new content and the results of the research are described in a series of papers for which this paper serves as an overview and context.Comment: 12 page

The early X-ray afterglows of optically bright and dark Gamma-Ray Bursts

A systematical study on the early X-ray afterglows of both optically bright and dark gamma-ray bursts (B-GRBs and D-GRBs) observed by Swift has been presented. Our sample includes 25 GRBs. Among them 13 are B-GRBs and 12 are D-GRBs. Our results show that the distributions of the X-ray afterglow fluxes ($F_{X}$), the gamma-ray fluxes ($S_{\gamma}$), and the ratio ($R_{\gamma, X}$) for both the D-GRBs and B-GRBs are similar. The differences of these distributions for the two kinds of GRBs should be statistical fluctuation. These results indicate that the progenitors of the two kinds of GRBs are the same population. Their total energy explosions are comparable. The suppression of the optical emissions from D-GRBs should results from circumburst but not their central engine.Comment: 10 pages, 3 figures, 1 table; accepted by ChJA

A general scheme for modeling gamma-ray burst prompt emission

We describe a general method for modeling gamma-ray burst prompt emission. We find that for the burst to be produced via the synchrotron process unphysical conditions are required -- the distance of the source from the center of the explosion ($R_\gamma$) must be larger than $\sim 10^{17}$cm and the source Lorentz factor \gta 10^3; for such a high Lorentz factor the deceleration radius ($R_d$) is less than $R_\gamma$ even if the number density of particles in the surrounding medium is as small as $\sim 0.1$ cm$^{-3}$. The result, $R_\gamma > R_d$, is in contradiction with the early x-ray and optical afterglow data. The synchrotron-self-Compton (SSC) process fares much better. There is a large solution space for a typical GRB prompt emission to be produced via the SSC process. The prompt optical emission accompanying the burst is found to be very bright (\lta 14 mag; for $z\sim2$) in the SSC model, which exceeds the observed flux (or upper limit) for most GRBs. Continuous acceleration of electrons can significantly reduce the optical flux and bring it down to the observed limits. (Abridged)Comment: Published in MNRAS Jan 2008, 56 page

Method for fabricating a low stress x-ray mask using annealable amorphous refractory compounds

X‐ray masks have been fabricated by depositing a compressively stressed refractory material on a wafer, annealing to a zero stress state, and then forming the membrane. Amorphous TaSiN and TaSi alloys deposited with a magnetron sputter tool have been extensively characterized in terms of resistivity, composition, defectivity, surface roughness, and crystalline state. Optimization in terms of these parameters has resulted in base line selection of absorber films of the following compositions: Ta_(61)Si_(17)N_(21) and Ta_(75)Si_(23). The process is shown to be extendable to an entire class of amorphous annealable refractory materials. Careful studies of deposition and annealing conditions have resulted in a 4× reduction of image placement to the 30 nm maximum vector level. Finally, the importance of stress gradients is experimentally verified