PtSe2 grown directly on polymer foil for use as a robust piezoresistive sensor

Robust strain gauges are fabricated by growing PtSe2 layers directly on top of flexible polyimide foils. These PtSe2 layers are grown by low-temperature, thermally-assisted conversion of predeposited Pt layers. Under applied flexure the PtSe2 layers show a decrease in electrical resistance signifying a negative gauge factor. The influence of the growth temperature and film thickness on the electromechanical properties of the PtSe2 layers is investigated. The best-performing strain gauges fabricated have a superior gauge factor to that of commercial metal-based strain gauges. Notably, the strain gauges offer good cyclability and are very robust, surviving repeated peel tests and immersion in water. Furthermore, preliminary results indicate that the stain gauges also show potential for high-frequency operation. This host of advantageous properties, combined with the possibility of further optimization and channel patterning, indicate that PtSe2 grown directly on polyimide holds great promise for future applications

Growth of 1T ' MoTe2 by thermally assisted conversion of electrodeposited tellurium films

Molybdenum ditelluride (MoTe2) is a transition metal dichalcogenide (TMD) which has two phases stable under ambient conditions, a semiconducting (2H) and semimetallic (1T') phase. Despite a host of interesting properties and potential applications, MoTe2 is one of the less-studied TMDs, perhaps due its relatively low abundance in nature or challenges associated with its synthesis, such as the toxicity of most precursors. In this report, we describe the fabrication of thin films of phase-pure IT' MoTe2 using predeposited molybdenum and electrodeposited tellurium layers, at the relatively low temperature of 450 C. This method allows control over film geometry and over the tellurium concentration during the conversion. The MoTe2 films are characterized by Raman spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscopy, and electron microscopies. When applied as a catalyst for the hydrogen evolution reaction, the films display promising initial results. The MoTe2 films have a Tafel slope of below 70 mV dec(-1) and compare favorably with other MoTe2 catalysts reported in the literature, especially considering the inherently scalable fabrication method. The variation in electrocatalytic behavior with thickness and morphology of the films is also investigated

Rhenium-doped MoS2 films

Tailoring the electrical properties of transition metal dichalcogenides by doping is one of the biggest challenges for the application of 2D materials in future electronic devices. Here, we report on a straightforward approach to the n-type doping of molybdenum disulfide (MoS2) films with rhenium (Re). High-Resolution Scanning Transmission Electron Microscopy and Energy-Dispersive X-ray spectroscopy are used to identify Re in interstitial and lattice sites of the MoS2 structure. Hall-effect measurements confirm the electron donating influence of Re in MoS2, while the nominally undoped films exhibit a net p-type doping. Density functional theory (DFT) modelling indicates that Re on Mo sites is the origin of the n-type doping, whereas S-vacancies have a p-type nature, providing an explanation for the p-type behaviour of nominally undoped MoS2 films