Four-Pass Coupler for Laser-Diode-Pumped Solid-State Laser

A four-pass optical coupler affords increased (in comparison with related prior two-pass optical couplers) utilization of light generated by a laser diode in side pumping of a solid-state laser slab. The original application for which this coupler was conceived involves a neodymium-doped yttrium aluminum garnet (Nd:YAG) crystal slab, which, when pumped by a row of laser diodes at a wavelength of 809 nm, lases at a wavelength of 1,064 nm. Heretofore, typically, a thin laser slab has been pumped in two passes, the second pass occurring by virtue of reflection of pump light from a highly reflective thin film on the side opposite the side through which the pump light enters. In two-pass pumping, a Nd:YAG slab having a thickness of 2 mm (which is typical) absorbs about 84 percent of the 809-nm pump light power, leaving about 16 percent of the pump light power to travel back toward the laser diodes. This unused power can cause localized heating of the laser diodes, thereby reducing their lifetimes. Moreover, if the slab is thinner than 2 mm, then even more unused power travels back toward the laser diodes. The four-pass optical coupler captures most of this unused pump light and sends it back to the laser slab for two more passes. As a result, the slab absorbs more pump light, as though it were twice as thick. The gain and laser cavity beam quality of a smaller laser slab in conjunction with this optical coupler can thus be made comparable to those of a larger two-pass-pumped laser slab

High Output Maximum Efficiency Resonator

A diode pumped, solid state laser is provided that can produce over 16 billion, 15 mJ, 10 ns Q-Switched laser pulses with a low measured decay rate. The laser can be integrated into a global biomass measuring instrument, and mounted on the International Space Station (ISS)

Injection seeded, diode pumped regenerative ring Nd:YAG amplifier for spaceborne laser ranging technology development

A small, all solid state, regenerative ring amplifier designed as a prototype for space application is discussed. Novel features include dual side pumping of the Nd:YAG crystal and a triangular ring cavity design which minimizes the number of optical components and losses. The amplifier is relatively small (3 ns round trip time) even though standard optical elements are employed. The ring regeneratively amplifies a 100 ps single pulse by approximately 10(exp 5) at a repetition rate of 10 to 100 Hz. The amplifier is designed to be injection seeded with a pulsed, 100 ps laser diode at 1.06 microns, but another Nd:YAG laser system supplying higher pulse energies was employed for laboratory experiment. This system is a prototype laser oscillator for the Geoscience Laser Ranging System (GLRS) platform. Results on measurements of beam quality, astigmatism, and gain are given

Efficient Dual Head Nd:YAG 100mJ Oscillator for Remote Sensing

A diode pumped, Nd:YAG laser producing 100 mJ Q-switched pulses and employing a dual-pump head scheme in an unstable resonator configuration is described. Each head contains a side pumped zig-zag slab and four 6-bar QCW 808 nm diodes arrays which are de-rated 23%. Denoting 'z' as the lasing axis, the pump directions were along the x-axis in one head and the y-axis in the other, producing a circularized thermal lens, more typical in laser rod-based cavities. The dual head design's effective thermal lens is now corrected with a proper HR mirror curvature selection. This laser has demonstrated over 100 mJ output with high optical efficiency (24%), good TEM(sub 00) beam quality, and high pointing stability

Tuning localized plasmons in nanostructured substrates for surface-enhanced Raman scattering

Comprehensive reflectivity mapping of the angular dispersion of nanostructured arrays comprising of inverted pyramidal pits is demonstrated. By comparing equivalently structured dielectric and metallic arrays, diffraction and plasmonic features are readily distinguished. While the diffraction features match expected theory, localised plasmons are also observed with severely flattened energy dispersions. Using pit arrays with identical pitch, but graded pit dimensions, energy scaling of the localised plasmon is observed. These localised plasmons are found to match a simple model which confines surface plasmons onto the pit sidewalls thus allowing an intuitive picture of the plasmons to be developed. This model agrees well with a 2D finite-difference time-domain simulation which shows the same dependence on pit dimensions. We believe these tuneable plasmons are responsible for the surface-enhancement of the Raman scattering (SERS) of an attached layer of benzenethiol molecules. Such SERS substrates have a wide range of applications both in security, chemical identification, environmental monitoring and healthcare

An investigation into CLIL-related sections of EFL coursebooks : issues of CLIL inclusion in the publishing market

The current ELT global coursebook market has embraced CLIL as a weak form of bilingual education and an innovative component to include in General English coursebooks for EFL contexts. In this paper I investigate how CLIL is included in ELT coursebooks aimed at teenaged learners, available to teachers in Argentina. My study is based on the content analysis of four series which include a section advertised as CLIL-oriented. Results suggest that such sections are characterised by (1) little correlation between featured subject specific content and school curricula in L1, (2) oversimplification of contents, and (3) dominance of reading skills development and lower-order thinking tasks. Through this study, I argue that CLIL components become superficial supplements rather than a meaningful attempt to promote weak forms of bilingual education

Shop Notes

Contains reports on four research projects

Explaining motivation in language learning: a framework for evaluation and research

Researching motivation in language learning is complex and multi-faceted. Various models of learner motivation have been proposed in the literature, but no one model supplies a complex and coherent framework for investigating a range of motivational characteristics. Building on previous models I propose such a methodological framework, based on a complex dynamic systems perspective, which re-conceptualises the investigation of motivation in SLA in qualitative and mixed method approaches by offering one flexible tool for case study approaches. This new framework has been tried and tested in three locations in England and reported as case studies. The study aimed to address the following research questions: (1) in what ways does CLIL impact on learner motivation? (2) what are the main elements of CLIL that enhance motivation? Overall analysis of the results found that where expectations of success were high and where the teaching was effective, CLIL had a positive impact on motivation and progress. The framework is designed to be flexible enough to be used to investigate language learning in a range of national contexts. It is hoped that the proposed framework, reported here together with exemplification and commentary from the English study, will enable researchers in a wide range of language learning contexts to investigate learner motivation in a systematic and in-depth manner