Characterization of different FAD-dependent glucose dehydrogenases for possible use in glucose-based biosensors and biofuel cells

In this study, different flavin adenine dinucleotide (FAD)-dependent glucose dehydrogenases (FADGDHs) were characterized electrochemically after “wiring” them with an osmium redox polymer [Os(4,4′-dimethyl-2,2′-bipyridine)2(PVI)10Cl]+ on graphite electrodes. One tested FADGDH was that recently discovered in Glomerella cingulata (GcGDH), another was the recombinant form expressed in Pichia pastoris (rGcGDH), and the third was a commercially available glycosylated enzyme from Aspergillus sp. (AspGDH). The performance of the Os-polymer “wired” GDHs on graphite electrodes was tested with glucose as the substrate. Optimal operational conditions and analytical characteristics like sensitivity, linear ranges and current density of the different FADGDHs were determined. The performance of all three types of FADGDHs was studied at physiological conditions (pH 7.4). The current densities measured at a 20 mM glucose concentration were 494 ± 17, 370 ± 24, and 389 ± 19 μA cm−2 for GcGDH, rGcGDH, and AspGDH, respectively. The sensitivities towards glucose were 2.16, 1.90, and 1.42 μA mM−1 for GcGDH, rGcGDH, and AspGDH, respectively. Additionally, deglycosylated rGcGDH (dgrGcGDH) was investigated to see whether the reduced glycosylation would have an effect, e.g., a higher current density, which was indeed found. GcGDH/Os-polymer modified electrodes were also used and investigated for their selectivity for a number of different sugars

Calcium dependence of aequorin bioluminescence dissected by random mutagenesis

Aequorin bioluminescence is emitted as a rapidly decaying flash upon calcium binding. Random mutagenesis and functional screening were used to isolate aequorin mutants showing slow decay rate of luminescence. Calcium sensitivity curves were shifted in all mutants, and an intrinsic link between calcium sensitivity and decay rate was suggested by the position of all mutations in or near EF-hand calcium-binding sites. From these results, a low calcium affinity was assigned to the N-terminal EF hand and a high affinity to the C-terminal EF-hand pair. In WT aequorin, the increase of the decay rate with calcium occurred at constant total photon yield and thus determined a corresponding increase of light intensity. Increase of the decay rate was underlain by variations of a fast and a slow component and required the contribution of all three EF hands. Conversely, analyses of double EF-hand mutants suggested that single EF hands are sufficient to trigger luminescence at a slow rate. Finally, a model postulating that proportions of a fast and a slow light-emitting state depend on calcium concentration adequately described the calcium dependence of aequorin bioluminescence. Our results suggest that variations of luminescence kinetics, which depend on three EF hands endowed with different calcium affinities, critically determine the amplitude of aequorin responses to biological calcium signals

Design of a Photoswitchable Cadherin

[Image: see text] There is a growing interest in engineering proteins whose function can be controlled with the spatial and temporal precision of light. Here, we present a novel example of a functional light-triggered switch in the Ca-dependent cell–cell adhesion protein E-cadherin, created using a mechanism-based design strategy. We report an 18-fold change in apparent Ca(2+) binding affinity upon illumination. Our results include a detailed examination of functional switching via linked changes in Ca(2+) binding and cadherin dimerization. This design opens avenues toward controllable tools that could be applied to many long-standing questions about cadherin’s biological function in cell–cell adhesion and downstream signaling

Wiring of Redox Enzymes on Three Dimensional Self-Assembled Molecular Scaffold

none6The integration of biological molecules and nanoscale components provides a fertile basis for the construction of hybrid materials of synergic properties and functions. Stable protein 1 (SP1), a highly stable ring shaped protein, was recently used to display different functional domains, to bind nanoparticles (NPs), and to spontaneously form two and three-dimensional structures. Here we show an approach to wire redox enzymes on this self-assembled protein nanoparticle hybrid. Those hybrids are genetically engineered SP1s, displaying glucose oxidase (GOx) enzymes tethered to the protein inner pore. Moreover, the Au-NP-protein hybrids self-assembled to multiple enzymatic layers on the surface. By wiring the redox enzymes to the electrode, we present an active structure for the bioelectrocatalytic oxidation of glucose. This system demonstrates for the first time a three-dimensional assembly of multiple catalytic modules on a protein scaffold with an efficient electrical wiring of the enzyme units on an electrode surface, thus implementing a hybrid electrically active unit for nanobioelectronic applications.noneFrasconi M; Heyman A; Medalsy I; Porath D; Mazzei F; Shoseyoy OFrasconi, Marco; Heyman, A; Medalsy, I; Porath, D; Mazzei, F; Shoseyoy, O

Engineering hybrid nanotube wires for high-power biofuel cells

Poor electron transfer and slow mass transport of substrates are significant rate-limiting steps in electrochemical systems. It is especially true in biological media, in which the concentrations and diffusion coeffi cients of substrates are low, hindering the development of power systems for miniaturized biomedical devices. In this study, we show that the newly engineered porous microwires comprised of assembled and oriented carbon nanotubes (CNTs) overcome the limitations of small dimensions and large specific surface area. Their improved performances are shown by comparing the electroreduction of oxygen to water in saline buffer on carbon and CNT fi bres. Under air, and after several hours of operation, we show that CNT microwires exhibit more than tenfold higher performances than conventional carbon fi bres. Consequently, under physiological conditions, the maximum power density of a miniature membraneless glucose / oxygen CNT biofuel cell exceeds by far the power density obtained for the current state of art carbon fi bre biofuel cells

Creating Biomimetic Surfaces through Covalent and Oriented Binding of Proteins

This manuscript describes a novel method for the biofunctionalization of glass surfaces with polyhistidine-tagged proteins. The main innovation of this methodology consists of the covalent binding between the nitrilotriacetic acid (NTA) moiety and the proteins, ensuring not only orientation, but also stability of the recombinant proteins on NTAcovered surfaces. In this work, as C-terminal polyhistidine tagged cadherin extracellular fragments have been used, this methodology guarantees the proper orientation of these proteins, by mimicking their insertion into cell plasma membranes. These biofunctionalized surfaces have been characterized by confocal microscopy, X-ray photoelectron spectroscopy, contact angle, and atomic force microscopy, showing a high density of cadherins on the glass surfaces and the stability of the linkage. The prepared materials exhibited a high tendency to promote cell spreading, demonstrating the functionality of the protein and the high utility of these biomaterials to promote cell adhesion events. Interestingly, differences in the cytoskeleton organization have been observed in cells adhering to surfaces with no cadherins or with nonoriented cadherins, in comparison to surfaces functionalized with well-oriented cadherins. This method, which allows the robust immobilization of polyhistidine tagged proteins due to their covalent binding and with a defined orientation, may also find particular usefulness in the making of protein biochips, for analysis of protein-protein interactions, as well as structural and single-molecule studies