1 research outputs found

    Evaluación de la contaminación física, química y bacteriológica del agua del río Nanay en los tramos: bocatoma agua potable/zanjón refinería Iquitos-Loreto-2018

    Get PDF
    The objective of this research is to evaluate the physical, chemical and bacteriological contamination of the water of the Nanay river – drinking water intake intake – Pampachica and Petroperú Refinery trench, located in the province of Loreto, Peru; during the months of August and December of the year 2018. The physical analysis used the HASH-Electrometric technique to measure electrical conductivity, pH and air temperature. In the chemical analysis, the techniques of titration, colorimetry, and spectrometry were used, and in the bacteriological analysis, the technique of multiple NMP fermentation tubes was used. Four stationary reference points 500 m above and 500 m below were taken for in situ and laboratory analyses. The results of the problem samples of the physical parameters were found: pH with a variation of 6.03 in the intake 500 m below the pH unit to 6.07 pH unit in the intake 500 m above the drinking water catchment and chemical parameters: Dissolved oxygen from 0.97 mg/L to 1.75 mg/L of the water in the Petroperú intake and refinery, which presents a high risk level for the aquatic environment, normalized by Supreme Decree No. 004-2017 -MINAM, which approves Environmental Quality Standards (ECA); for water, the average iron ranges between 0.83 mg/L – 8.16 mg/L which does not present what is admissible in the standards of the World Health Organization and the European Union.Esta investigación tiene como objetivo evaluar la contaminación física, química y bacteriológica del agua del rio Nanay – bocatoma de captación de agua potable – Pampachica y zanjón Refinería Petroperú, localizado en la provincia de Loreto, Perú; durante los meses de agosto y diciembre del año 2018. El análisis físico, utilizó la técnica de HASH-Electrométrico para medir conductibilidad eléctrica, pH y temperatura del aire. En el análisis químico se utilizó las técnicas de titulación, colorimetría, espectrometría y en el análisis bacteriológico se usó la técnica de los tubos múltiples de fermentación NMP. Se tomaron cuatro puntos de referencia estacionarias a 500 m arriba y 500 m abajo para los análisis in situ y laboratorio. Se encontró los resultados de las muestras problemas de los parámetros físicos: pH con una variación de 6,03 en Bocatoma a 500 m abajo unidad de pH a 6,07 unidad de pH en la Bocatoma a 500 m arriba de captación de agua potable y parámetros químicos: Oxígeno disuelto de 0,97 mg/L a 1,75 mg/L del agua en la Bocatoma y refinería Petroperú, la cual presenta un nivel de alto riesgo para el medio acuático, normalizada por el Decreto Supremo No 004-2017-MINAM, que aprueban Estándares de Calidad Ambiental (ECA); para agua el hierro el promedio oscila entre 0,83 mg/L – 8,16 mg/L el cual no presenta lo admisible en los estándares de la Organización Mundial de la Salud y Unión Europea
    corecore