10 research outputs found
Foams with enhanced ductility and impact behavior based on polypropylene composites
Producción CientíficaIn this work, formulations based on composites of a linear polypropylene (L-PP), a long-chain branched polypropylene (LCB-PP), a polypropylene–graft–maleic anhydride (PP-MA), a styrene-ethylene-butylene-styrene copolymer (SEBS), glass fibers (GF), and halloysite nanotubes (HNT-QM) have been foamed by using the improved compression molding route (ICM), obtaining relative densities of about 0.62. The combination of the inclusion of elastomer and rigid phases with the use of the LCB-PP led to foams with a better cellular structure, an improved ductility, and considerable values of the elastic modulus. Consequently, the produced foams presented simultaneously an excellent impact performance and a high stiffness with respect to their corresponding solid counterparts.Unión Europea (Evolution project under grant 314744)Ministerio de Ciencia, Innovación y Universidades - Fondo Europeo de Desarrollo Regional (project RTI2018-098749-B-I00)Junta de Castilla y Leon (project VA275P18
The Effect of SEBS/Halloysite Masterbatch Obtained in Different Extrusion Conditions on the Properties of Hybrid Polypropylene/Glass Fiber Composites for Auto Parts
Masterbatches from a linear poly[styrene-b-(ethylene-co-butylene)-b-styrene] (SEBS) and halloysite nanotubes (HNT-QM) were obtained in different conditions of temperature and shear using two co-rotating twin-screw extruders. The influence of screw configuration and melt processing conditions on the morpho-structural, thermal and mechanical properties of masterbatches at macro and nanoscale was studied. A good dispersion of halloysite nanotubes and better thermal stability and tensile and nanomechanical properties were obtained at a lower temperature profile and higher screw speed. The effect of masterbatches, the best and worst alternatives, on the properties of a polypropylene (PP)–glass fiber (GF) composite was also evaluated. Double hardness, tensile strength and modulus and four times higher impact strength were obtained for PP/GF composites containing masterbatches compared to pristine PP. However, the masterbatch with the best properties led further to enhanced mechanical properties of the PP/GF composite. A clear difference between the effects of the two masterbatches was obtained by nanoindentation and nanoscratch tests. These analyses proved to be useful for the design of polymer composites for automotive parts, such as bumpers or door panels. This study demonstrated that setting-up the correct processing conditions is very important to obtain the desired properties for automotive applications
Stearic Acid/Layered Double Hydroxides Composite Thin Films Deposited by Combined Laser Techniques
We report on the investigation of stearic acid-layered double hydroxide (LDH) composite films, with controlled wettability capabilities, deposited by a combined pulsed laser deposition (PLD)-matrix-assisted pulsed laser evaporation (MAPLE) system. Two pulsed lasers working in IR or UV were used for experiments, allowing the use of proper deposition parameters (wavelength, laser fluence, repetition rate) for each organic and inorganic component material. We have studied the time stability and wettability properties of the films and we have seen that the morphology of the surface has a low effect on the wettability of the surfaces. The obtained composite films consist in stearic acid aggregates in LDH structure, exhibiting a shift to hydrophobicity after 36 months of storage
Preliminary Studies on Graphene-Reinforced 3D Products Obtained by the One-Stage Sacrificial Template Method for Bone Reconstruction Applications
The bone remodeling field has shifted focus towards the delineation of products with two main critical attributes: internal architectures capable to promote fast cell colonization and good mechanical performance. In this paper, Luffa-fibers and graphene nanoplatelets were proposed as porogen template and mechanical reinforcing agent, respectively, in view of framing 3D products by a one-stage polymer-free process. The ceramic matrix was prepared through a reproducible technology, developed for the conversion of marble resources into calcium phosphates (CaP) powders. After the graphene incorporation (by mechanical and ultrasonication mixing) into the CaP matrix, and Luffa-fibers addition, the samples were evaluated in both as-admixed and thermally-treated form (compact/porous products) by complementary structural, morphological, and compositional techniques. The results confirmed the benefits of the two agents’ addition upon the compact products’ micro-porosity and the global mechanical features, inferred by compressive strength and elastic modulus determinations. For the porous products, overall optimal results were obtained at a graphene amount of <1 wt.%. Further, no influence of graphene on fibers’ ability to generate at high temperatures internal interconnected-channels-arrays was depicted. Moreover, its incorporation led to a general preservation of structural composition and stability for both the as-admixed and thermally-treated products. The developed CaP-reinforced structures sustain the premises for prospective non- and load-bearing biomedical applications
The Effect of Graphene Nanoplatelets on the Properties of Hybrid Polyamide/Glass Fiber Composites
Currently, the method of solving the issues related to the environment has become a topic of great interest and is approached by researching several directions, such as recycling or the replacement of polluting materials [...
The Nanomechanical and Tribological Properties of Polyamide/Hydrotalcite Nanocomposites
In specific fields of the industry (e.g., aircraft and automotive industry), plastic materials with high performance (improved scratch resistance, fire resistance, thermal stability, and high mechanical properties) are required. [...
Morphological And Thermo Mechanical Properties Of Halloysite/Polypropylene Nanocomposites
Scanning Electron Microscopy and Raman Spectroscopy Characterization of Structural Changes Induced by Thermal Treatment in Innovative Bio-Based Polyamide Nanocomposites
A comprehensive Raman scattering-based characterization of a full bio-based polyamide loaded with graphene nanoplatelets or layered double hydroxides (LDH) was assessed. The potential of the Raman spectroscopy was used to reveal several particularities of the nanocomposite structures induced by thermal treatment. Thus, a complete morpho-structural picture was obtained in combination with scanning electron microscopy (SEM) analysis of the neat polyamide and polyamide nanocomposites exposed at different thermal conditions (room temperature, 80 °C, and 145 °C). The analysis of G, D and 2D Raman peaks and their relative intensity ratio ID/IG, revealed the fact that the presence of graphene in polyamide is suitable for improving the essential physical properties and is also responsible for the decrease in the defects’ occurrence in the graphene layers. The surface of nanocomposites based on full bio-based polyamide, with different 2D fillers (graphenic and non-graphenic structures), was carefully evaluated before and after the thermal treatment by employing SEM and Raman analyses. The two thermal treatments allowed different chain mobility of the polymer (first temperature being over the polymer Tg and second one close to the melting phase in the viscoelastic stage). The spectroscopic and microscopic investigation was used to determine the conformational changes in filler aggregates and polymer surface, respectively