33,642 research outputs found
Arcs in a finite projective plane
The projective plane of order 11 is the dominant focus of this work. The motivation for working in the projective plane of order 11 is twofold. First, it is the smallest projective plane of prime power order such that the size of the largest (n, r)-arc is not known for all r ∈ {2,...,q + 1}. It is also the smallest projective plane of prime order such that the (n; 3)-arcs are not classified. Second, the number of (n, 3)-arcs is significantly higher in the projective plane of order 11 than it is in the projective plane of order 7, giving a large number of (n, 3)-arcs for study.
The main application of (n, r)-arcs is to the study of linear codes.
As a forerunner to the work in the projective plane of order eleven two algorithms are used to raise the lower bound on the size of the smallest complete n-arc in the projective plane of order thirty-one from 12 to 13.
This work presents the classification up to projective equivalence of the complete (n, 3)- arcs in PG(2, 11) and the backtracking algorithm that is used in its construction. This algorithm is based on the algorithm used in [3]; it is adapted to work on (n, 3)-arcs as opposed to n-arcs. This algorithm yields one representative from every projectively inequivalent class of (n, 3)-arc. The equivalence classes of complete (n, 3)-arcs are then further classified according to their stabilizer group.
The classification of all (n, 3)-arcs up to projective equivalence in PG(2, 11) is the foundation of an exhaustive search that takes one element from every equivalence class and determines if it can be extended to an (n′, 4)-arc. This search confirmed that in PG(2, 11) no (n, 3)-arc can be extended to a (33, 4)-arc and that subsequently m4(2, 11) = 32. This same algorithm is used to determine four projectively inequivalent complete (32, 4)-arcs, extended from complete (n, 3)-arcs.
Various notions under the general title of symmetry are defined both for an (n, r)-arc and for sets of points and lines. The first of these makes the classification of incomplete (n; 3)- arcs in PG(2, 11) practical. The second establishes a symmetry based around the incidence structure of each of the four projectively inequivalent complete (32, 4)-arcs in PG(2, 11); this allows the discovery of their duals. Both notions of symmetry are used to analyze the incidence structure of n-arcs in PG(2, q), for q = 11, 13, 17, 19.
The penultimate chapter demonstrates that it is possible to construct an (n, r)-arc with a stabilizer group that contains a subgroup of order p, where p is a prime, without reference to an (m < n, r)-arc, with stabilizer group isomorphic to ℤ1. This method is used to find q-arcs and (q + 1)-arcs in PG(2, q), for q = 23 and 29, supporting Conjecture 6.7.
The work ends with an investigation into the effect of projectivities that are induced by a matrix of prime order p on the projective planes. This investigation looks at the points and subsets of points of order p that are closed under the right action of such matrices and their structure in the projective plane. An application of these structures is a restriction on the size of an (n, r)-arc in PG(2, q) that can be stabilized by a matrix of prime order p
Testing a Simplified Version of Einstein's Equations for Numerical Relativity
Solving dynamical problems in general relativity requires the full machinery
of numerical relativity. Wilson has proposed a simpler but approximate scheme
for systems near equilibrium, like binary neutron stars. We test the scheme on
isolated, rapidly rotating, relativistic stars. Since these objects are in
equilibrium, it is crucial that the approximation work well if we are to
believe its predictions for more complicated systems like binaries. Our results
are very encouraging.Comment: 9 pages (RevTeX 3.0 with 6 uuencoded figures), CRSR-107
Use of steepest descent and various approximations for efficient computation of minimum noise aircraft landing trajectories
The following areas related to landing trajectory optimization research were discussed: (1) programming and modifying the steepest descent optimization procedure, (2) successfully iterating toward the optimum for a four-mile trajectory, (3) beginning optimization runs for a twenty-mile trajectory, and (4) adapt wind tunnel data for computer usage. Other related areas were discussed in detail in the two previous annual reports
Optimization and sensitivity studies of flight-path trajectories
The optimization of landing trajectories of the Boeing 737 is presented. The primary factor considered was the noise delivered to the population residing near an air terminal but passenger comfort, fuel consumption and time elapsed during the maneuver were also considered. A digital simulation of the aircraft, a noise model and a passenger comfort model, was completed. The digital simulation was made more efficient time-wise. A population model for an urban area was developed and the noise model was integrated into the population model. A steepest descent optimization algorithm was programmed. Some constant glide slope trajectories into an urban Airport were simulated and evaluated with respect to the performance index, and their ground track plotted
Determining crustal strain rates with a spaceborne geodynamics ranging system. 2: Station coordinate analysis
The use of a spaceborne geodynamics ranging system for determining crustal strain rates is analyzed. The use of site coordinates rather than intersite baseline distances for the strain rate determinations is emphasized. After discussing the analytical techniques which are to be employed, numerical results are presented which suggest that the use of site coordinates would result in a 20-70% improvement in the precision of the deduced values of straining. Precision of a few parts in 10 to the 9th power would be achievable with simple geometrics and a decade or two of measurements; precisions of a few parts in 10 to the 8th power would be achievable in a few years. A consideration of possible correlations among the derived target site coordinates leads to the conclusion that, with the proper choice of coordinate systems, the correlations can be made small and non-detrimental to the strain rate determinations
Predictions for the fracture toughness of cancellous bone of fracture neck of femur patients
Current protocol in determining if a patient is osteoporotic and their fracture risk is based on dual energy X-ray absorptiometry (DXA). DXA gives an indication of their bone mineral density (BMD) which is the product of both the porosity and density of the mineralized bone tissue; this is usually taken at the hip. The DXA results are assessed using the fracture risk assessment tool as recommended by the World Health Organization. While this provides valuable data on a person’s fracture risk advancements in medical imagining technology enables development of more robust and accurate risk assessment tools. In order to develop such tools in vitro analysis of bone is required to assess the morphological properties of bone osteoporotic bone tissue and how these pertain to the fracture toughness (Kcmax) of the tissue.Support was provided by the EPSRC (EP/K020196: Point-ofCare High Accuracy Fracture Risk Prediction), the UK Department of Transport under the BOSCOS (Bone Scanning for Occupant Safety) project, and approved by Gloucester and Cheltenham NHS Trust hospitals under ethical consent (BOSCOS – Mr. Curwen CI REC ref 01/179G)
Quasi-circular Orbits for Spinning Binary Black Holes
Using an effective potential method we examine binary black holes where the
individual holes carry spin. We trace out sequences of quasi-circular orbits
and locate the innermost stable circular orbit as a function of spin. At large
separations, the sequences of quasi-circular orbits match well with
post-Newtonian expansions, although a clear signature of the simplifying
assumption of conformal flatness is seen. The position of the ISCO is found to
be strongly dependent on the magnitude of the spin on each black hole. At close
separations of the holes, the effective potential method breaks down. In all
cases where an ISCO could be determined, we found that an apparent horizon
encompassing both holes forms for separations well inside the ISCO.
Nevertheless, we argue that the formation of a common horizon is still
associated with the breakdown of the effective potential method.Comment: 13 pages, 10 figures, submitted to PR
Inflatable device for installing strain gage bridges
Methods and devices for installing in a tubular shaft multiple strain gages are disclosed with focus on a method and a device for pneumatically forcing strain gages into seated engagement with the internal surfaces of a tubular shaft in an installation of multiple strain gages in a tubular shaft. The strain gages or other electron devices are seated in a template-like component which is wrapped about a pneumatically expansible body. The component is inserted into a shaft and the body is pneumatically expanded after a suitable adhesive was applied to the surfaces
Device measures conductivity and velocity of ionized gas streams
Coaxial arrangement of primary coil and two sensing secondary coils contained inside slender quartz tube inserted into ionized stream permits simultaneous determination of conductivity and linear velocity. System results agree favorably with theory
Alternatives to standard puncture initial data for binary black hole evolution
Standard puncture initial data have been widely used for numerical binary
black hole evolutions despite their shortcomings, most notably the inherent
lack of gravitational radiation at the initial time that is later followed by a
burst of spurious radiation. We study the evolution of three alternative
initial data schemes. Two of the three alternatives are based on post-Newtonian
expansions that contain realistic gravitational waves. The first scheme is
based on a second-order post-Newtonian expansion in Arnowitt, Deser, and Misner
transverse-traceless (ADMTT) gauge that has been resummed to approach standard
puncture data at the black holes. The second scheme is based on asymptotic
matching of the 4-metrics of two tidally perturbed Schwarzschild solutions to a
first-order post-Newtonian expansion in ADMTT gauge away from the black holes.
The final alternative is obtained through asymptotic matching of the 4-metrics
of two tidally perturbed Schwarzschild solutions to a second-order
post-Newtonian expansion in harmonic gauge away from the black holes. When
evolved, the second scheme fails to produce quasicircular orbits (and instead
leads to a nearly head-on collision). This failure can be traced back to
inaccuracies in the extrinsic curvature due to low order matching. More
encouraging is that the latter two alternatives lead to quasicircular orbits
and show gravitational radiation from the onset of the evolution, as well as a
reduction of spurious radiation. Current deficiencies compared to standard
punctures data include more eccentric trajectories during the inspiral and
larger constraint violations, since the alternative data sets are only
approximate solutions of Einstein's equations. The eccentricity problem can be
ameliorated by adjusting the initial momentum parameters.Comment: 11 pages, 11 figures, 1 appendix, typos corrected, removed duplicate
reference, matches published versio
- …