Remediation of sandy soils contaminated with hydrocarbons and halogenated hydrocarbons by soil vapour extraction

This paper presents the study of the remediation of sandy soils containing six of the most common contaminants (benzene, toluene, ethylbenzene, xylene, trichloroethylene and perchloroethylene) using soil vapour extraction (SVE). The influence of soil water content on the process efficiency was evaluated considering the soil type and the contaminant. For artificially contaminated soils with negligible clay contents and natural organic matter it was concluded that: (i) all the remediation processes presented efficiencies above 92%; (ii) an increase of the soil water content led to a more time-consuming remediation; (iii) longer remediation periods were observed for contaminants with lower vapour pressures and lower water solubilities due to mass transfer limitations. Based on these results an easy and relatively fast procedure was developed for the prediction of the remediation times of real soils; 83% of the remediation times were predicted with relative deviations below 14%

Multiple Linear Regression and Artificial Neural Networks to Predict Time and Efficiency of Soil Vapor Extraction

The prediction of the time and the efficiency of the remediation of contaminated soils using soil vapor extraction remain a difficult challenge to the scientific community and consultants. This work reports the development of multiple linear regression and artificial neural network models to predict the remediation time and efficiency of soil vapor extractions performed in soils contaminated separately with benzene, toluene, ethylbenzene, xylene, trichloroethylene, and perchloroethylene. The results demonstrated that the artificial neural network approach presents better performances when compared with multiple linear regression models. The artificial neural network model allowed an accurate prediction of remediation time and efficiency based on only soil and pollutants characteristics, and consequently allowing a simple and quick previous evaluation of the process viability

Health and Economic Burden of the 2017 Portuguese Extreme Wildland Fires on Children

Wildland fires release substantial amounts of hazardous contaminants, contributing to a decline in air quality and leading to serious health risks. Thus, this study aimed to understand the contributions of the 2017 extreme wildland fires in Portugal on children health, compared to 2016 (with burned area, in accordance with the average of the previous 15 years). The impact of long-term exposure to PM10 and NO2 concentrations, associated with wildland fires, on postneonatal mortality, bronchitis prevalence, and bronchitis symptoms in asthmatic children was estimated, as well as the associated costs. The excess health burden in children attributable to exposure to PM10 and NO2, was calculated based on WHO HRAPIE relative risks. Fire emissions were obtained from the Fire INventory from NCAR (FINN). The results obtained indicate that the smoke from wildfires negatively impacts children's lung function (PM10 exposure: increase of 320 and 648 cases of bronchitis in 2016 and 2017; NO2 exposure: 24 and 40 cases of bronchitis symptoms in asthmatic children in 2016 and 2017) and postneonatal mortality (PM10 exposure: 0.2 and 0.4 deaths in 2016 and 2017). Associated costs were increased in 2017 by around 1 million (sic) for all the evaluated health endpoints, compared to 2016

Integration of microalgae-based bioenergy production into a petrochemical complex: Techno-economic assessment

The rapid development of modern society has resulted in an increased demand for energy, mainly from fossil fuels. The use of this source of energy has led to the accumulation of carbon dioxide (CO2) in the atmosphere. In this context, microalgae culturing may be an effective solution to reduce the CO2 concentration in the atmosphere, since these microorganisms can capture CO2 and, simultaneously, produce bioenergy. This work consists of a techno-economic assessment of a microalgal production facility integrated in a petrochemical complex, in which established infrastructure allows efficient material and energy transport. Seven different scenarios were considered regarding photosynthetic, lipids extraction and anaerobic digestion efficiencies. This analysis has demonstrated six economically viable scenarios able to: (i) reduce CO2 emissions from a thermoelectric power plant; (ii) treat domestic wastewaters (which were used as culture medium); and (iii) produce lipids and electrical and thermal energy. For a 100-ha facility, considering a photosynthetic efficiency of 3%, a lipids extraction efficiency of 75% and an anaerobic digestion efficiency of 45% (scenario 3), an economically viable process was obtained (net present value of 22.6 million euros), being effective in both CO2 removal (accounting for 1.1 × 104 t per year) and energy production (annual energy produced was 1.6 × 107 kWh and annual lipids productivity was 1.9 × 103 m3). (c) 2016 by the authors

Chromatographic techniques for the determination of free phenol in foundry resins

Phenol is a toxic compound present in a wide variety of foundry resins. Its quantification is important for the characterization of the resins as well as for the evaluation of free contaminants present in foundry wastes. Two chromatographic methods, liquid chromatography with ultraviolet detection (LC-UV) and gas chromatography with flame ionization detection (GC-FID), for the analysis of free phenol in several foundry resins, after a simple extraction procedure (30 min), were developed. Both chromatographic methods were suitable for the determination of phenol in the studied furanic and phenolic resins, showing good selectivity, accuracy (recovery 99–100%; relative deviations <5%), and precision (coefficients of variation <6%). The used ASTM reference method was only found to be useful in the analysis of phenolic resins, while the LC and GC methods were applicable for all the studied resins. The developed methods reduce the time of analysis from 3.5 hours to about 30 min and can readily be used in routine quality control laboratories

Contribution of traffic and tobacco smoke in the distribution of polycyclic aromatic hydrocarbons on outdoor and indoor PM2.5

Traffic emissions and tobacco smoke are considered two main sources of polycyclic aromatic hydrocarbons (PAHs) in indoor and outdoor air. In this study, the impact of these sources on the level of fine particulate matter (PM2.5) and on the distribution of 15 PAHs regarded as priority pollutants by the US-EPA on PM2.5 were evaluated and compared. Outdoor and indoor PM2.5 samples were collected during winter 2008 in Oporto city in Portugal, for sampling periods of 12 and 24 hours, respectively. The outdoor PM2.5 were sampled at one site directly influenced by traffic emissions and the indoor PM2.5 samples were collected at one home directly influenced by tobacco smoke and another one without smoke. A methodology based on microwave-assisted extraction and liquid chromatography with fluorescence detection was applied for the efficient PAHs determination in indoor and outdoor PM2.5. PAHs in indoor PM2.5 concentrations were significantly influenced by the presence of traffic and tobacco smoking emissions. The mean of ΣPAHs in the outdoor traffic PM2.5 was not significantly different from the value attained in the indoor without smoking site. The tobacco smoke increased significantly PAHs concentrations on average about 1000 times more, when compared with the outdoor profile samples suggesting that tobacco smoking may be the most important source of indoor PAHs pollution

Children's exposure to indoor air in schools: Impact on wheezing

Wheezing is a common symptom in childhood and has been associated with air pollution. Children spend a large part of their time in school, this being the most important indoor environment apart from home. However, studies on the impact of children's indoor air pollution exposure at schools on respiratory health are scarce. Thus, this study aimed to assess the impact of children's exposure to indoor air pollution in a total of five urban nursery and primary schools on active wheezing. Multivariate logistic regression models were used to estimate the associations, adjusted for sex, age group (pre-school/primary school) and parental history of asthma. A microenvironmental modelling approach was used to estimate indoor air pollution exposure to each of the pollutants exceeding legislation limit values (CO2, formaldehyde and PM2.5), as the sum of the product of time spent by the child in different indoor school microenvironments and the time-averaged concentration measured in each microenvironment. Measurements were performed in 11 classrooms, two bedrooms and two canteens in Porto, Portugal. A total of 164 completed parent-reported questionnaires derived from the International Study of Asthma and Allergies in Childhood allowed to identify active wheezing (at least one wheeze episode in the previous 12 months) in 16.5% of the studied children. Although not statistically significant, the studied children's exposure to indoor air pollution in nursery and primary schools seemed to be associated with an increase in the odds of having active wheezing especially for PM2.5 (OR = 1.57, p-value = 0.675). These results highlight the importance of applying indoor air pollution mitigation measures in nursery and primary schools. The impacts of those measures, on both indoor air quality and children's respiratory health, should be evaluated in future studies. (c) 2019 WIT Pres