Quantum-field-theoretical techniques for stochastic representation of quantum problems

We describe quantum-field-theoretical (QFT) techniques for mapping quantum problems onto c-number stochastic problems. This approach yields results which are identical to phase-space techniques [C.W. Gardiner, {\em Quantum Noise} (1991)] when the latter result in a Fokker-Planck equation for a corresponding pseudo-probability distribution. If phase-space techniques do not result in a Fokker-Planck equation and hence fail to produce a stochastic representation, the QFT techniques nevertheless yield stochastic difference equations in discretised time

Numerical and experimental performance evaluation of two multi-stage cloud collectors

January 1999.Also issued as Derek J. Straub's thesis (M.S.) -- Colorado State University, 1999.Includes bibliographical references.An evaluation of the collection characteristics of two new multi-stage cascade inertial impactors designed for size-resolved cloud drop collection has been performed. The FROSTY supercooled cloud collector is intended for the collection of supercooled cloud drops in a winter environment in three independent size fractions with stage 50% cut diameters of 15 μm, 10 μm, and 4 μm . The CSU 5-Stage cloud collector is designed for sampling warm clouds in five distinct fractions on five stages that have desired 50% cut diameters of 30, 25, 15 , 10, and 4 μm. Two approaches were selected for the evaluation of the FROSTY and CSU 5-Stage cloud collectors. Numerical simulations provided a visualization of the air flow patterns and drop trajectories through the collectors while experimental laboratory calibrations provided a quantitative analysis of true collection performance. For each of these methods, 50% cut diameters, efficiency curves, and wall losses for each stage of the FROSTY and CSU 5-Stage collectors were derived. The experimental calibration work indicated that distinct fractions of cloudwater are collected in each stage of the FROSTY and CSU 5-Stage collectors. At laboratory conditions, the experimentally determined 50% cut diameters for the three stages of the FROSTY supercooled cloud collector were 19, 11.5, and 5 μm. Drop losses to the interstage wall surfaces in the FROSTY collector peaked at approximately 35% for 16 μm drops and were lower for larger and smaller drop sizes. For operation at design conditions of 3000 m elevation and -4° C, the 50% cut diameters are expected to decrease to 17, 10.5, and 4.5 μm. The experimentally determined 50% cut diameters, measured at laboratory conditions, for the CSU 5-Stage cloud collector were 25.5, 29, 17.5, 10.5, and 4.5 μm for stages 1 through 5, respectively. Wall losses tended to be higher than those for the FROSTY cloud collector across the drop size range under consideration. Losses peaked at nearly 45% for drops between 10 and 18 μm in diameter and decreased to about 20% at the largest and smallest drop sizes. 50% cut diameters are expected to remain essentially unchanged for CSU 5-Stage collector operation at sea level design conditions. Numerical modeling of the air flow patterns as well as drop trajectories through the FROSTY and CSU 5-Stage cloud collectors was performed with the commercially available Computational Fluid Dynamics (CFO) software package FLUENT, from Fluent, Inc. FLUENT offered two alternatives for the calculation of drop trajectories. Trajectory simulations based on the average continuous phase (air) velocity field as well as trajectory simulations which included the effects of statistically derived turbulent velocity fluctuations on drop motion were performed. Drop collection patterns based on these types of trajectory calculations were used to generate collection efficiency curves. Comparisons were made between the numerically predicted collection efficiency curves and efficiency curves established through experimental calibration. These comparisons indicated that the inclusion of turbulent fluctuation effects on drop motion provided better agreement with experimental observations than trajectories based only on average flow field velocities. However, the use of velocity fluctuations defined by default parameters also produced unrealistic losses to wall surfaces for small drop sizes. The parameters controlling turb lent velocity fluctuation effects on drop motion were examined in an effort to provide better agreement between the numerical and experimental results. Despite this shortcoming, numerically derived 50% cut diameters and overall collection efficiency curve shapes, for drop trajectories including turbulent velocity fluctuations, agreed reasonably well with experimental observations in most cases.Sponsored by the National Science Foundation ATM-9509596 , and the U.S. Environmental Research and Quality Assurance R82-3979-010

A model of ant route navigation driven by scene familiarity

In this paper we propose a model of visually guided route navigation in ants that captures the known properties of real behaviour whilst retaining mechanistic simplicity and thus biological plausibility. For an ant, the coupling of movement and viewing direction means that a familiar view specifies a familiar direction of movement. Since the views experienced along a habitual route will be more familiar, route navigation can be re-cast as a search for familiar views. This search can be performed with a simple scanning routine, a behaviour that ants have been observed to perform. We test this proposed route navigation strategy in simulation, by learning a series of routes through visually cluttered environments consisting of objects that are only distinguishable as silhouettes against the sky. In the first instance we determine view familiarity by exhaustive comparison with the set of views experienced during training. In further experiments we train an artificial neural network to perform familiarity discrimination using the training views. Our results indicate that, not only is the approach successful, but also that the routes that are learnt show many of the characteristics of the routes of desert ants. As such, we believe the model represents the only detailed and complete model of insect route guidance to date. What is more, the model provides a general demonstration that visually guided routes can be produced with parsimonious mechanisms that do not specify when or what to learn, nor separate routes into sequences of waypoints

Design and testing of a new aircraft-based cloud water sampling system

December 2002Also issued as Derek J. Straub's dissertation (Ph.D.) -- Colorado State University, 2002.Includes bibliographical references.Experimental studies of cloud processing mechanisms necessitate the collection of representative samples of cloud water for chemical analysis. In order to provide samples from clouds that are inaccessible from ground-based sampling stations, a new aircraft-based cloud water collection system has been developed . The objective of the design process was to produce an automated collector that can acquire well-characterized cloud water samples and is portable between multiple research aircraft. Issues such as cloud drop shatter and re-entrainment, structural integrity, system size and weight, material compatibility with the anticipated chemical analyses, and ease of use during field operation w re all considered during the design process. The new cloud water collection system utilizes an axial-flow cyclone to centrifugally separate cloud drops from the air stream. Up to seven individual samples can be stored over the course of a single research flight. An analysis of the axial-flow cyclone was performed with a finite volume based computational fluid dynamics (CFD) code. Solutions were obtained for air flow patterns and cloud drop trajectories. The predicted continuous phase (air) velocity field indicates that the axial-flow cyclone generates a strong rotational ow field with a tangential velocity of 85 ms-'. Based on simulations of cloud drop trajectories, centrifugal force in the rotational flow field is sufficient to quickly move entrained cloud drops to the wall of the axial-flow cyclone duct where they can be removed for storage. Collection efficiency as a function of drop size was ascertained and the 50% cut diameter was determined to be approximately 8 microns. An experimental laboratory calibration involving monodisperse fluorescein-tagged drops verified the numerical modeling results. The system was deployed during the Dynamics an Chemistry of Marine Stratocumulus, Phase II (DYCOM -II) field project in July 2001. The DYCOMS-II campaign served as a testing and evaluation program for the system as well as an opportunity to study the chemical composition of stratocumulus clouds in the remote marine environment. Over the course of the project, 50 samples were obtained during seven nighttime and two daytime flights. Sample pH was measured on-site after each flight. Peroxide, formaldehyde, S(IV), trace metals and major ions (Cr, NO3-, so/-, Na+, NH/, K+, ca2+, and Mg2+) were preserved on site and analyzed after the field campaign. The analyses were used to characterize the composition of the sampled clouds and to investigate cloud processing mechanisms, including the potential for rapid aqueous phase oxidation of S(IV) to sulfate.Sponsored by the National Science Foundation ATM-0084696, and the National Center for Atmospheric Research Advanced Study Program

Nonlinear field-dependence and f-wave interactions in superfluid 3He

We present results of transverse acoustics studies in superfluid ^{3}He-B at fields up to 0.11 T. Using acoustic cavity interferometry, we observe the Acoustic Faraday Effect for a transverse sound wave propagating along the magnetic field, and we measure Faraday rotations of the polarization as large as 1710^{\circ}. We use these results to determine the Zeeman splitting of the Imaginary Squashing mode, an order parameter collective mode with total angular momentum J=2. We show that the pairing interaction in the f-wave channel is attractive at a pressure of P=6 bar. We also report nonlinear field dependence of the Faraday rotation at frequencies substantially above the mode frequency not accounted for in the theory of the transverse acoustic dispersion relation formulated for frequencies near the mode. Consequently, we have identified the region of validity of the theory allowing us to make corrections to the analysis of Faraday rotation experiments performed in earlier work.Comment: 7 pages, 5 figure

Generalized positive P representation with third-order noise in intracavity coherent photoassociation of Bose-Einstein condensates

We investigate the process of intracavity photoassociation of Bose-Einstein-condensed atoms to form a molecular condensate. As shown previously, this process can only be successfully described by a quantum treatment of all the interacting fields. We extend our previous work by representing the full quantum aspects of the problem using an extension of the positive P representation to model non-Wiener noises, This allows the mapping of a generalized Fokker-Planck equation with third-order derivatives onto a set of coupled stochastic difference equations. We also investigate parameter regimes not covered previously, as well as the effects of spontaneous dissociation of the condensed molecules

Measuring the quantum statistics of an atom laser beam

We propose and analyse a scheme for measuring the quadrature statistics of an atom laser beam using extant optical homodyning and Raman atom laser techniques. Reversal of the normal Raman atom laser outcoupling scheme is used to map the quantum statistics of an incoupled beam to an optical probe beam. A multimode model of the spatial propagation dynamics shows that the Raman incoupler gives a clear signal of de Broglie wave quadrature squeezing for both pulsed and continuous inputs. Finally, we show that experimental realisations of the scheme may be tested with existing methods via measurements of Glauber's intensity correlation function.Comment: 4 pages, 3 figure

The Capture and Escape of Stars

The shape of galaxies depends on their orbital populations. These populations change through capture into and escape from resonance. Capture problems fall into distinct cases depending upon the shape of the potential well. To visualise the effective potential well for orbital capture, a diagrammatic approach to the resonant perturbation theory of Born is presented. These diagrams we call equiaction sections. To illustrate their use, we present examples drawn from both galactic and Solar System dynamics. The probability of capture for generic shapes of the potential well is calculated. A number of predictions are made. First, there are barred galaxies that possess two outer rings of gas and stars (type R1R2). We show how to relate changes in the pattern speed and amplitude of the bar to the strength of the two rings. Secondly, under certain conditions, small disturbances can lead to dramatic changes in orbital shape. This can be exploited as a mechanism to pump counter-rotating stars and gas into the nuclei of disk galaxies. Tidal resonant forcing of highly inclined orbits around a central mass causes a substantial increase in the likelihood of collision. Thirdly, the angular momentum of a potential well is changed by the passage of stars across or capture into the well. This can lead to the creation of holes, notches and high velocity tails in the stellar distribution function, whose form we explicitly calculate.Comment: 22 pages, Tex file, 19 Postscript figures, uses psfig 2 further figures are not Postscript, but are available on emailing the authors, MNRA