740 research outputs found
Long-term visual and microperimetry outcomes following autologous retinal pigment epithelium choroid graft for neovascular age-related macular degeneration
To describe the 2- to 4-year visual and microperimetry outcomes of autologous retinal pigment epithelium (RPE)-choroid graft in patients with neovascular age-related macular degeneration (AMD).In this retrospective cohort study, 12 patients with subfoveal neovascular AMD who had undergone autologous RPE-choroid graft between August 2004 and June 2005 were reviewed. Change in visual acuity (VA), contrast sensitivity (CS), fixation stability and retinal sensitivity on microperimetry after 2-3 years and the rates of late postoperative complications were examined.Patients were followed for 26-48 months (mean, 39). Median preoperative VA (logMAR) was 0.87 but declined to 1.43 (1 year), 1.46 (2 years) and 1.38 (3 years), P = 0.001. Median CS (logCS) was 0.75 preoperatively but declined to 0.45 at 2 years. Six patients had serial microperimetry. Fixation stability declined in 1 but improved in 2 patients. All 6 had decline in retinal sensitivity over the graft during follow up. Retinal detachment did not occur after 12 months but 8 developed epiretinal membrane, 12 had cystic retinal change over the graft and 4 developed recurrent choroidal neovascularization. However, 10 grafts retained autofluorescence signal at 18-48 months of follow up.Autologous RPE-choroid graft can maintain VA, stable fixation and retinal sensitivity in some patients for over 3 years. The spatial correlation between graft autofluorescence, outer retinal structures on optical coherence tomography and retinal sensitivity are consistent with photoreceptor cell rescue. However, we caution the use of this technique as there is high complication rate and delayed loss of retinal function
Growth and dislocation studies of β-HMX
Background: The defect structure of organic materials is important as it plays a major role in their crystal growth
properties. It also can play a subcritical role in “hot-spot” detonation processes of energetics and one such
energetic is cyclotetramethylene-tetranitramine, in the commonly used beta form (β-HMX).
Results: The as-grown crystals grown by evaporation from acetone show prismatic, tabular and columnar habits, all
with {011}, {110}, (010) and (101) faces. Etching on (010) surfaces revealed three different types of etch pits, two of
which could be identified with either pure screw or pure edge dislocations, the third is shown to be an artifact of
the twinning process that this material undergoes. Examination of the {011} and {110} surfaces show only one type
of etch pit on each surface; however their natural asymmetry precludes the easy identification of their Burgers
vector or dislocation type. Etching of cleaved {011} surfaces demonstrates that the etch pits can be associated with
line dislocations. All dislocations appear randomly on the crystal surfaces and do not form alignments characteristic
of mechanical deformation by dislocation slip.
Conclusions: Crystals of β-HMX grown from acetone show good morphological agreement with that predicted by
modelling, with three distinct crystal habits observed depending upon the supersaturation of the growth solution.
Prismatic habit was favoured at low supersaturation, while tabular and columnar crystals were predominant at
higher super saturations. The twin plane in β-HMX was identified as a (101) reflection plane. The low plasticity of
β-HMX is shown by the lack of etch pit alignments corresponding to mechanically induced dislocation arrays.
On untwinned {010} faces, two types of dislocations exist, pure edge dislocations with b = [010] and pure screw
dislocations with b = [010]. On twinned (010) faces, a third dislocation type exists and it is proposed that these pits
are associated with pure screw dislocations with b = [010]
An in vitro model of chronic wounding and its implication for age-related macular degeneration
Degeneration of the retinal pigment epithelium (RPE) plays a central role in age-related macular degeneration (AMD). Throughout life, RPE cells are challenged by a variety of cytotoxic stressors, some of which are cumulative with age and may ultimately contribute to drusen and lipofuscin accumulation. Stressors such as these continually damage RPE cells resulting in a state of chronic wounding. Current cell-based platforms that model a state of chronic RPE cell wounding are limited, and the RPE cellular response is not entirely understood. Here, we used the electric cell-substrate impedance sensing (ECIS) system to induce a state of acute or chronic wounding on differentiated human fetal RPE cells to analyze changes in the wound repair response. RPE cells surrounding the lesioned area employ both cell migration and proliferation to repair wounds but fail to reestablish their original cell morphology or density after repetitive wounding. Chronically wounded RPE cells develop phenotypic AMD characteristics such as loss of cuboidal morphology, enlarged size, and multinucleation. Transcriptomic analysis suggests a systemic misregulation of RPE cell functions in bystander cells, which are not directly adjacent to the wound. Genes associated with the major RPE cell functions (LRAT, MITF, RDH11) significantly downregulate after wounding, in addition to differential expression of genes associated with the cell cycle (CDK1, CDC6, CDC20), inflammation (IL-18, CCL2), and apoptosis (FAS). Interestingly, repetitive wounding resulted in prolonged misregulation of genes, including FAS, LRAT, and PEDF. The use of ECIS to induce wounding resulted in an over-representation of AMD-associated genes among those dysregulated genes, particularly genes associated with advanced AMD. This simple system provides a new model for further investigation of RPE cell wound response in AMD pathogenesis
Using induced pluripotent stem cells to understand retinal ciliopathy disease mechanisms and develop therapies
The photoreceptor cells in the retina have a highly specialised sensory cilium, the outer segment (OS), which is important for detecting light. Mutations in cilia-related genes often result in retinal degeneration. The ability to reprogramme human cells into induced pluripotent stem cells and then differentiate them into a wide range of different cell types has revolutionised our ability to study human disease. To date, however, the challenge of producing fully differentiated photoreceptors in vitro has limited the application of this technology in studying retinal degeneration. In this review, we will discuss recent advances in stem cell technology and photoreceptor differentiation. In particular, the development of photoreceptors with rudimentary OS that can be used to understand disease mechanisms and as an important model to test potential new therapies for inherited retinal ciliopathies
Spontaneous Generation of Patient-Specific Retinal Pigment Epithelial Cells Using Induced Pluripotent Stem Cell Technology
Stem cell technology has a number potential uses when it comes to the eye, particularly disease and developmental modelling, and as potential therapeutic source. A variety of protocols have been developed that facilitate the generation of the different cell types found within the eye, as well as those that produce a facsimile of the developing eye in vitro. This chapter introduces the importance of the Retinal Pigment Epithelium (RPE) in maintaining visual function. We then focus on methods developed by our group to produce RPE from patient skin samples using human induced pluripotent stem cell technology (iPSC)
Cone photoreceptor definition on adaptive optics retinal imaging
To quantitatively analyse cone photoreceptor matrices on images captured on an adaptive optics (AO) camera and assess their correlation to well-established parameters in the retinal histology literature
Vascular changes in diabetic retinopathy-a longitudinal study in the Nile rat
Diabetic retinopathy is the most common microvascular complication of diabetes and is a major cause of blindness, but an understanding of the pathogenesis of the disease has been hampered by a lack of accurate animal models. Here, we explore the dynamics of retinal cellular changes in the Nile rat (Arvicanthis niloticus), a carbohydrate-sensitive model for type 2 diabetes. The early retinal changes in diabetic Nile rats included increased acellular capillaries and loss of pericytes that correlated linearly with the duration of diabetes. These vascular changes occurred in the presence of microglial infiltration but in the absence of retinal ganglion cell loss. After a prolonged duration of diabetes, the Nile rat also exhibits a spectrum of retinal lesions commonly seen in the human condition including vascular leakage, capillary non-perfusion, and neovascularization. Our longitudinal study documents a range and progression of retinal lesions in the diabetic Nile rat remarkably similar to those observed in human diabetic retinopathy, and suggests that this model will be valuable in identifying new therapeutic strategies
Mechanical properties of β-HMX
Background: For a full understanding of the mechanical properties of a material, it is essential to understand the defect structures and associated properties and microhardness indentation is a technique that can aid this understanding. Results: The Vickers hardness on (010), {011} and {110} faces lay in the range of 304-363 MPa. The Knoop Hardnesses on the same faces lay in the range 314-482 MPa. From etching of three indented surfaces, the preferred slip planes have been identified as (001) and (101). For a dislocation glide, the most likely configuration for dislocation movement on the (001) planes is (001) [100] (|b| = 0.65 nm) and for the (101) plane as (101) 101~(|b| = 1.084 nm) although (101) [010] (|b| = 1.105 nm) is possible. Tensile testing showed that at a stress value of 2.3 MPa primary twinning occurred and grew with increasing stress. When the stress was relaxed, the twins decreased in size, but did not disappear. The twinning shear strain was calculated to be 0.353 for the (101) twin plane. Conclusions: HMX is considered to be brittle, compared to other secondary explosives. Comparing HMX with a range of organic solids, the values for hardness numbers are similar to those of other brittle systems. Under the conditions developed beneath a pyramidal indenter, dislocation slip plays a major part in accommodating the local deformation stresses. © 2015 Gallagher et al.; licensee Springer
A cellular disease model system of ARB: The creation of iPS-RPE from a patient with a premature stop mutation (p.R200X)
Identification and Correction of Mechanisms Underlying Inherited Blindness in Human iPSC-Derived Optic Cups
Leber congenital amaurosis (LCA) is an inherited retinal dystrophy that causes childhood blindness. Photoreceptors are especially sensitive to an intronic mutation in the cilia-related gene CEP290, which causes missplicing and premature termination, but the basis of this sensitivity is unclear. Here, we generated differentiated photoreceptors in three-dimensional optic cups and retinal pigment epithelium (RPE) from iPSCs with this common CEP290 mutation to investigate disease mechanisms and evaluate candidate therapies. iPSCs differentiated normally into RPE and optic cups, despite abnormal CEP290 splicing and cilia defects. The highest levels of aberrant splicing and cilia defects were observed in optic cups, explaining the retinal-specific manifestation of this CEP290 mutation. Treating optic cups with an antisense morpholino effectively blocked aberrant splicing and restored expression of full-length CEP290, restoring normal cilia-based protein trafficking. These results provide a mechanistic understanding of the retina-specific phenotypes in CEP290 LCA patients and potential strategies for therapeutic intervention
- …