203 research outputs found

    Enhanced hydrophilicity of chlorided aluminum oxide particulates

    Get PDF
    An enhancement of hydrophilicity for chlorided aluminas was demonstrated by the results obtained from gaseous H2O sorptions at 70-, 80-, and 86-percent relative humidity on alpha and gamma aluminum oxide particulates and on alpha and gamma aluminum oxide particulates with a chemisorbed surface chloride phase (produced by reactions of gaseous HCl + H2O on alumina). Continuous sorption histories for H2O on chlorided aluminas having specific surface areas that range from 7 to 227 sq m/g before chloriding indicated that initial sorption rates were directly linked to the extent of chemisorbed chlorided coverage and implied the same relationship for sorption capacities. The initial sorption rate on chlorided aluminas was found to be slower for the first exposure to H2O than for subsequent exposures (which reached equilibrated H2O coverages much faster), suggesting that slow chemical reactions between H2O and chlorided alumina may have been operative during initial exposures. Chlorided alumina particles were found to remain very hydrophilic (relative to nonchlorided analogs) for several H2O sorption/desorption cycles

    Nebulization reflux concentrator

    Get PDF
    A nebulization reflux concentrator for removing trace gas contaminants from a sample gas is described. Sample gas from a gas supply is drawn by a suction source into a vessel. The gas enters the vessel through an atomizing nozzle, thereby atomizing and entraining a scrubbing liquid solvent drawn through a siphon tube from a scrubbing liquid reservoir. The gas and entrained liquid rise through a concentrator and impinge upon a solvent phobic filter, whereby purified gas exits through the filter housing and contaminated liquid coalesces on the solvent phobic filter and falls into the reservoir

    Summary of 1978 Southeastern Virginia Urban Plume study: Aircraft results for carbon monoxide, methane, nonmethane hydrocarbons, and ozone

    Get PDF
    The characteristics of the Southeastern Virginia urban plume were defined with emphasis on the photon-oxidant species. The measurement area was a rectangle, approximately 150 km by 100 km centered around Cape Charles, Virginia. Included in this area are the cities of Norfolk, Virginia Beach, Chesapeake, Newport News, and Hampton. The area is bounded on the north by Wallops Island, Virginia, and on the south by the Hampton Roads area of Tidewater Virginia. The major axis of the rectangle is oriented in the southwest-northeast direction. The data set includes aircraft measurements for carbon monoxide, methane, nonmethane hydrocarbons, and ozone. The experiment shows that CO can be successfully measured as a tracer gas and used as an index for determining localized and urban plumes. The 1978 data base provided sufficient data to assess an automated chromatograph with flame ionization detection used for measuring methane and nonmethane hydrocarbons in flight

    S-band omnidirectional antenna for the SERT-C satellite

    Get PDF
    The program to design an S-band omnidirectional antenna system for the SERT-C spacecraft is discussed. The program involved the tasks of antenna analyses by computer techniques, scale model radiation pattern measurements of a number of antenna systems, full-scale RF measurements, and the recommended design, including detailed drawings. A number of antenna elements were considered: the cavity-backed spiral, quadrifilar helix, and crossed-dipoles were chosen for in-depth studies. The final design consisted of a two-element array of cavity-backed spirals mounted on opposite sides of spacecraft and fed in-phase through a hybrid junction. This antenna system meets the coverage requirement of having a gain of at least minus 10 dBi over 50 percent of a 4 pi steradian sphere with the solar panels in operation. This coverage level is increased if the ground station has the capability to change polarization

    Carbon-catalyzed oxidation of SO2 by NO2 and air

    Get PDF
    A series of experiments was performed using carbon particles (commercial furnace black) as a surrogate for soot particles. Carbon particles were suspended in water, and gas mixtures were bubbled into the suspensions to observe the effect of carbon particles on the oxidation of SO2 by air and NO2. Identical gas mixtures were bubbled into a blank containing only pure water. After exposure each solution was analyzed for pH and sulfate. It was found that NO2 greatly enhances the oxidation of SO2 to sulfate in the presence of carbon particles. The amount of sulfate found in the blanks was significantly less. Under the conditions of these experiments no saturation of the reaction was observed and SO2 was converted to sulfate even in a highly acid medium (pH or = 1.5)

    Summary of measurement results of ozone, methane, and nonmethane hydrocarbons for C-54 aircraft. 1979 Southeastern Virginia Urban Plume Study

    Get PDF
    Methane, nonmethane hydrocarbon, and ozone data collected in a C-54 aircraft during the 1979 Southeastern Virginia Urban Plume Study are presented. Three major aircraft experiments were flown on five separate days in August collecting 20 hours of flight data. Direct correlation between ozone and hydrocarbon plumes was observed on several occasions

    What Does an Exemplary Middle School Mathematics Teacher Look Like? The Use of a Professional Development Rubric

    Get PDF
    A School University Research Network (SURN) committee composed of current mathematics teachers, central office math supervisors, building administrators, mathematicians, and mathematics educators researched numerous sources regarding best practices in mathematics instruction. The resulting professional development rubric synthesizes their findings and can serve a professional development role by providing teachers and administrators with a tool to develop clarity and consensus on best mathematics instructional practices, and how these practices are implemented in the classroom. It is also being used as a tool for cooperating teachers in their supervision of student teachers and as a reflective method for self-evaluation

    Advancing Clinical Practice through Integration of Congenital Cytomegalovirus (cCMV) Testing with Newborn Hearing Screening at Mayo Clinic

    Get PDF
    Although cCMV is the leading non-genetic cause of childhood hearing loss in the United States, neither targeted nor universal screening protocols have been well established to identify cCMV in newborns. Moreover, until cCMV testing is universal, clinical protocols need to account for the complexities of individualized care in partnership with interprofessional care teams. This work addressed an immediate clinical practice need to identify cCMV with subsequent hearing monitoring of babies who test positive for cCMV. This effort focused on three primary objectives to: 1) define interprofessional, team-based approach to facilitate care pathways; 2) develop a clinical workflow for all babies who refer on inpatient hearing screening to be tested for cCMV by 21 days of age; 3) develop a hearing monitoring plan for all babies who test positive for cCMV. The development and integration of our interprofessional, team-based approach to institute cCMV testing by 21 days of age on all babies who refer inpatient newborn hearing screening and subsequent monitoring is described. Our observed referral rate was lower than predicted (2.7%) from existing literature with only one positive cCMV outcome noted in the two-year span. This study demonstrates the feasibility of a hearing-targeted cCMV testing paradigm in our clinic practice

    Application of Dynamic System Identification to Timber Beams - part I

    Full text link
    In this first part of a two-part paper, development of a method of dynamic system identification for timber beams is presented with an analytical verification of the method using a finite-element model. A method of global nondestructive evaluation for identifying local damage and decay in timber beams is investigated in this paper. Experimental modal analysis is used in conjunction with a previously developed damage localization algorithm. The damage localization algorithm utilizes changes in modal strain energy between the mode shapes of a calibrated model, representing the undamaged state of the beam of interest, and the experimentally obtained mode shapes for a timber beam. Analytical evaluations were performed to demonstrate and verify the use of this method of global nondestructive evaluation for the localization of damage or decay in timber beams. In a companion paper, experimental laboratory tests are presented that verify the use of dynamic system identification to locate damage within timber beams
    corecore