Flexible Buffer Materials to Reduce Contact Resistance in Thermal Insulation Measurements

Thermal insulation test methods approach their lower limits as thermal resistance falls below 0.1 m2⋅K/W. This is the minimum value specified in ASTM C 518 (ASTM International, 2010b) while ASTM C 177 (ASTM International, 2010a) proposes about 0.06 m2⋅K/W. Nevertheless these are the test methods, along with their ISO equivalents, required by Australasian building codes and directed at many products and materials with thermal resistance on the low side of 0.1 m2⋅K/W. Alternatives, such as ASTM E 1530 (ASTM International, 2011), cover much lower resistances but require carefully prepared small specimens and very-high contact pressures and are therefore largely unsuitable for both technical and compliance reasons. For these low resistances, the insulation test methods face large errors because of interface resistance between specimen and the apparatus hot and cold plates. Staying with C 518, the problem can be avoided by using direct measurement of the test specimen surface temperatures, but this is difficult, has its own accuracy issues, and is often impractical for commercial laboratories. This technique is generally used in conjunction with interface materials such as flexible foam between the specimen and the hot and cold plates, to enhance contact and also provide an access path for temperature sensors. The alternative prospect of using these interface materials to ensure good specimen contact has been studied, in conjunction with a simple two-step thermal resistance determination based on the difference between presence and absence of the test specimen. This article presents results of a study using this difference approach for the measurement of 12 highly conducting materials, including sheets of aluminum, phenolic, HDPE, MgO, bonded rubber and cork granules, PMMA, and compressed wood fiber. For each material, repeated measurements have been performed with four different interface or “buffer” materials: PVC, silicone, EVA, and nitrile. Silicone sponge provides the most uniform results, consistent with a measurably lower hysteresis. The difference technique yielded a lower indicated thermal resistance than direct measurement by between 0.003 and 0.01 m2⋅K/W, with some variation depending on the specimen surface characteristics and to a lesser extent on the choice of buffer. Larger differences were associated with bowed, uneven or roughly surfaced specimens. The difference-technique results have greater variability, but they may be seen as better estimates of the actual specimen resistance, as contact resistance is much lower for soft-surface interfaces. An interface resistance of up to 0.01 m2⋅K/W is large enough to be of significance in many thermal measurements

Post-Foucauldian governmentality: what does it offer critical social policy analysis?

This article considers the theoretical perspective of post-Foucauldian governmentality, especially the insights and challenges it poses for applied researchers within the critical social policy tradition. The article firstly examines the analytical strengths of this approach to understanding power and rule in contemporary society, before moving on to consider its limitations for social policy. It concludes by arguing that these insights can be retained, and some of the weaknesses overcome, by adopting a ‘realist governmentality’ approach (Stenson 2005, 2008). This advocates combining traditional discursive analysis with more ethnographic methods in order to render visible the concrete activity of governing, and unravel the messiness, complexity and unintended consequences involved in the struggles around subjectivity

A mini-survey for variability in early L dwarfs

We report differential I-band photometry of four early L-dwarfs obtained to study variability. We detect variability on the timescale of hours in two objects, 2M0746425+200032 (at a level of 0.007 mag -- 6.5 sigma) and 2M1108307+683017 (0.012 mag -- 5 sigma). We also place upper limits of 0.02 mag (1 sigma) on the variability of two others.Comment: 5 pages. MNRAS, in pres

Dynamics of a self-gravitating thin cosmic string

We assume that a self-gravitating thin string can be locally described by what we shall call a smoothed cone. If we impose a specific constraint on the model of the string, then its central line obeys the Nambu-Goto equations. If no constraint is added, then the worldsheet of the central line is a totally geodesic surface.Comment: 20 pages, latex, 1 figure, final versio

Software process reflexivity and business performance: initial results from an empirical study

Commercial software development organisations routinely operate in dynamic environments, with various situational factors that affect the software development approach undergoing recurring change. We therefore suggest that process reflexivity - the ability to reflect upon the suitability of a software process for a given context and to adapt the process according to changing situational circumstances – is an important capability for software development organizations.. In support of this position we conducted an exploratory industrial study of software development in practice. An initial analysis of our data suggests that software process reflexivity may exercise a strong influence over business success. Further work is required to fully examine our data, however, initial findings indicate that software process reflexivity is worthy of greater attentio

Optimization of the reverse transcriptase polymerase chain reaction for the detection of circulating prostate cells

The reverse transcriptase polymerase chain reaction (RT-PCR) is a sensitive technique that can detect prostate-specific messenger RNA in circulating blood. Many authors have studied the potential of RT-PCR as a staging technique in prostate cancer (PC). Clinical sensitivity and in some cases specificity has been disappointing. Few authors have been able to correlate RT-PCR result with patient stage. We have compared the results of using two different RT-PCR protocols with different sensitivities on blood samples from prostate cancer patients. An 80-amplification-cycle nested primer RT-PCR assay had a detection limit of 10 prostate cells and a 50-cycle RT-PCR could detect 20 cells in 5 ml blood. The 80-cycle assay detected prostate mRNA in four of 10 female samples, whereas the 50-cycle assay detected it in none. There was little difference in the assays’ ability to detect prostate mRNA in advanced PC patients. The 50-cycle assay could differentiate between hormone-escaped, stable hormone-treated and untreated localized PC patients, whereas the 80-cycle assay could not. Each blood sample must be assayed several times with RT-PCR to avoid false-negative results and, if this is done, assay specificity can be increased with little effect on clinical sensitivity. © 2000 Cancer Research Campaig

Investigating the distribution of polybrominated diphenyl ethers through an Australian wastewater treatment plant

The aim of this study was to quantify the amount of polybrominated diphenyl ethers (PBDEs) released into the environment (biosolids, effluent) from a conventional Australian activated sludge treatment wastewater treatment plant (WWTP). The concentration of PBDE congeners was measured at various treatment stages and included four aqueous samples (raw, primary, secondary and tertiary effluents) and three sludges (primary, secondary and lime stabilized biosolids), collected at three sampling events over the course of the experiment (29 days). Semi-permeable membrane devices (SPMDs) were also installed for the duration of the experiment, the first time that SPMDs have been used to measure PBDEs in a WWTP. Over 99% of the PBDEs entering the WWTP were removed through the treatment processes, principally by sedimentation. The main congeners detected were BDE 47, 99 and 209, which are characteristic of the two major commercial formulations viz penta-BDE and deca-BDE. All the PBDE congeners measured were highly correlated with each other, suggesting a similar origin. In this case, the PBDEs are thought to be from domestic sources since domestic wastewater is the main contribution to the in-flow (approximately 95%). The mean concentration of SigmaPBDEs in chemically stabilized sewage sludge (biosolids) was 300microg kg(-1) dry weight. It is calculated that 2.3+/-0.3kg of PBDEs are disposed of each year with biosolids generated from the WWTP. If all Australian sewage sludge is contaminated to at least this concentration then at least 110kg of PBDEs are associated with Australian sewage sludge annually. Less than 10g are released annually into the environment via ocean outfall and field irrigation; this level of contamination is unlikely to pose risk to humans or the environment. The environmental release of treated effluent and biosolids is not considered a large source of PBDE environmental emissions compared to the quantities used annually in Australia

Double marking revisited

In 2002, the Qualifications and Curriculum Authority (QCA) published the report of an independent panel of experts into maintaining standards at Advanced Level (A-Level). One of its recommendations was for: ‘limited experimental double marking of scripts in subjects such as English to determine whether the strategy would signi-ficantly reduce errors of measurement’ (p. 24). This recommendation provided the impetus for this paper which reviews the all but forgotten literature on double marking and considers its relevance now