Technique for predicting the thermal expansion coefficients of cryogenic metallic alloys

Series of measurements on the thermal expansion coefficients of several aerospace alloys and standard materials establish relationships between related alloys that would aid in predicting their thermal expansion reliability. Thermal expansion data are also necessary for the reduction of electrical resistivity measurements of those same materials

Laser-initiated combustion studies of selected aluminum, copper, iron, and nickel alloys

The results of combustion studies at atmospheric pressure on ten metal alloys are presented. The alloys studied were aluminum alloys 1100, 2219, 6061, and tensile-50; 304, 347 and 21-6-9 stainless steel; inconel 600; beryllium copper and a bronze. It was found that once ignition was achieved all alloys would generally burn to completion. The overall combustion process appears to obey a first order rate process. Preliminary conclusions are presented along with recommendations for future work

Investigating dark matter substructure with pulsar timing: I. Constraints on ultracompact minihalos

Small-scale dark matter structure within the Milky Way is expected to affect pulsar timing. The change in gravitational potential induced by a dark matter halo passing near the line of sight to a pulsar would produce a varying delay in the light travel time of photons from the pulsar. Individual transits produce an effect that would either be too rare or too weak to be detected in 30-year pulsar observations. However, a population of dark matter subhalos would be expected to produce a detectable effect on the measured properties of pulsars if the subhalos constitute a significant fraction of the total halo mass. The effect is to increase the dispersion of measured period derivatives across the pulsar population. By statistical analysis of the ATNF pulsar catalogue, we place an upper limit on this dispersion of $\log \sigma_{\dot{P}} \leq -17.05$. We use this to place strong upper limits on the number density of ultracompact minihalos within the Milky Way. These limits are completely independent of the particle nature of dark matter.Comment: 9 pages, 5 figues, includes erratum published in MNRA

A survey of compatibility of materials with high pressure oxygen service

The available information on the compatibility of materials with oxygen as applied to the production, transport, and applications experience of high pressure liquid and gaseous oxygen is compiled. High pressure is defined as about 2000 to 3000 psia. Since high pressure projections sometimes can be made from lower pressure data, some low pressure data are also included. Low pressure data are included if they are considered helpful to a better understanding of the behavior at high pressures

Metal alloy resistivity measurements at very low temperatures

High speed, automated system accurately measures to approximately one percent in three minutes. System identifies materials having constant thermal or electric conductivity, predicts new material properties, develops alloys in accordance with desired specifications, and develops nondestructive devices for measuring precipitation hardening

Effect of area ratio on the performance of a 5.5:1 pressure ratio centrifugal impeller

A centrifugal impeller which was initially designed for a pressure ratio of approximately 5.5 and a mass flow rate of 0.959 kg/sec was tested with a vaneless diffuser for a range of design point impeller area ratios from 2.322 to 2.945. The impeller area ratio was changed by successively cutting back the impeller exit axial width from an initial value of 7.57 mm to a final value of 5.97 mm. In all, four separate area ratios were tested. For each area ratio a series of impeller exit axial clearances was also tested. Test results are based on impeller exit surveys of total pressure, total temperature, and flow angle at a radius 1.115 times the impeller exit radius. Results of the tests at design speed, peak efficiency, and an exit tip clearance of 8 percent of exit blade height show that the impeller equivalent pressure recovery coefficient peaked at a design point area ratio of approximately 2.748 while the impeller aerodynamic efficiency peaked at a lower value of area ratio of approximately 2.55. The variation of impeller efficiency with clearance showed expected trends with a loss of approximately 0.4 points in impeller efficiency for each percent increase in exit axial tip clearance for all impellers tested

Creating a supersolid in one-dimensional Bose mixtures

We identify a one-dimensional supersolid phase in a binary mixture of near-hardcore bosons with weak, local inter-species repulsion. We find realistic conditions under which such a phase, defined here as the coexistence of quasi-superfluidity and quasi-charge density wave order, can be produced and observed in finite ultra-cold atom systems in a harmonic trap. Our analysis is based on Luttinger liquid theory supported with numerical calculations using the time-evolving block decimation method. Clear experimental signatures of these two orders can be found, respectively, in time-of-flight interference patterns, and the structure factor S(k) derived from density correlations.Comment: 4 pages, 5 figures, changed Fig. 4, and minor edit

Transcriptomic profiling of human breast and melanoma cells selected by migration through narrow constraints

The metastatic spread of cancer cells is a step-wise process that starts with dissociation from primary tumours and local invasion of adjacent tissues. The ability to invade local tissues is the product of several processes, including degradation of extracellular matrices (ECM) and movement of tumour cells through physically-restricting gaps. To identify properties contributing to tumour cells squeezing through narrow gaps, invasive MDA-MB-231 human breast cancer and MDA-MB-435 human melanoma cells were subjected to three successive rounds of selection using cell culture inserts with highly constraining 3 μm pores. For comparison purposes, flow cytometry was also employed to enrich for small diameter MDA-MB-231 cells. RNA-Sequencing (RNA-seq) using the Illumina NextSeq 500 platform was undertaken to characterize how gene expression differed between parental, invasive pore selected or small diameter cells. Gene expression results obtained by RNA-seq were validated by comparing with RT-qPCR. Transcriptomic data generated could be used to determine how alterations that enable cell passage through narrow spaces contribute to local invasion and metastasis

Microsecond resolution of quasiparticle tunneling in the single-Cooper-pair-transistor

We present radio-frequency measurements on a single-Cooper-pair-transistor in which individual quasiparticle poisoning events were observed with microsecond temporal resolution. Thermal activation of the quasiparticle dynamics is investigated, and consequently, we are able to determine energetics of the poisoning and un-poisoning processes. In particular, we are able to assign an effective quasiparticle temperature to parameterize the poisoning rate.Comment: 4 pages, 4 fig