Chemical Synthesis at Surfaces with Atomic Precision: Taming Complexity and Perfection

Scanning probe microscopy (SPM) is a powerful tool to study the structure and dynamics of molecules at surfaces and interfaces as well as to precisely manipulate atoms and molecules by applying an external force, by inelastic electron tunneling, or by means of an electric field. The rapid development of these SPM manipulation modes made it possible to achieve fine‐control over fundamental processes in the physics of interfaces as well as chemical reactivity, such as adsorption, diffusion, bond formation, and bond dissociation with precision at the single atom/molecule level. Their controlled use for the fabrication of atomic‐scale structures and synthesis of new, perhaps uncommon, molecules with programmed properties are reviewed. Opportunities and challenges towards the development of complex chemical systems are discussed, by analyzing potential future impacts in nanoscience and nanotechnology.journal articlereview2019 Dec 192019 11 28importe

Graphene via Molecule-Assisted Ultrasound-Induced Liquid-Phase Exfoliation: A Supramolecular Approach

Graphene is a two-dimensional (2D) material holding unique optical, mechanical, thermal and electrical properties. The combination of these exceptional characteristics makes graphene an ideal model system for fundamental physical and chemical studies as well as technologically ground breaking material for a large range of applications. Graphene can be produced either following a bottom-up or top-down method. The former is based on the formation of covalent networks suitably engineered molecular building blocks undergoing chemical reaction. The latter takes place through the exfoliation of bulk graphite into individual graphene sheets. Among them, ultrasound-induced liquid-phase exfoliation (UILPE) is an appealing method, being very versatile and applicable to different environments and on various substrate types. In this chapter, we describe the recently reported methods to produce graphene via molecule-assisted UILPE of graphite, aiming at the generation of high-quality graphene. In particular, we will focus on the supramolecular approach, which consists in the use of suitably designed organic molecules during the UILPE of graphite. These molecules act as graphene dispersion-stabilizing agents during the exfoliation. This method relying on the joint effect of a solvent and ad hoc molecules to foster the exfoliation of graphite into graphene in liquid environment represents a promising and modular method toward the improvement of the process of UILPE in terms of the concentration and quality of the exfoliated material. Furthermore, exfoliations in aqueous and organic solutions are presented and discussed separately

Self-organization of amino-acid-derived NDI assemblies into a nanofibrillar superstructure with humidity sensitive n-type semiconducting properties

The hierarchical self-assembly of L-tyrosine substituted naphthalenediimide has been explored in solution by NMR spectroscopy and in the solid-state by atomic force microscopy. Spontaneous non-covalent polymerisation led to the formation of a three-dimensional fibre-like supramolecular polymer with n-type semiconducting properties

Punctured Two-Dimensional Sheets for Harvesting Blue Energy

The challenges of global climate change and the world’s growing demand for energy have brought the need for new renewable energy sources to the top of the international community’s agenda. We have known for many centuries that energy is released upon mixing seawater and freshwater, yet it was just a few decades ago that it became clear how this energy can be converted into electricity instead of heat. As a result, the blue energy rush has raised and set new strategies in different science and technology sectors, leading to the construction of a new generation of plants and other technological investments. Among many approaches, pressure-retarded osmosis has emerged as a promising method to collect the largest amount of produced blue energy. In this Perspective, we highlight the advances in the development of ultrathin membranes based on two-dimensional materials. We discuss the most relevant synthetic methods devised to generate atomically thin membranes for pressure-retarded osmosis and retarded electrodialysis applications, and we provide some critical views on the greatest challenges in this thrilling research area

Imine-Based Architectures at Surfaces and Interfaces: From Self-Assembly to Dynamic Covalent Chemistry in 2D

Within the last two decades, dynamic covalent chemistry (DCC) has emerged as an efficient and versatile strategy for the design and synthesis of complex molecular systems in solution. While early examples of supramolecularly assisted covalent synthesis at surfaces relied strongly on kinetically controlled reactions for post-assembly covalent modification, the DCC method takes advantage of the reversible nature of bond formation and allows the generation of the new covalently bonded structures under thermodynamic control. These structurally complex architectures obtained by means of DCC protocols offer a wealth of solutions and opportunities in the generation of new complex materials that possess sophisticated properties. In this focus review we examine the formation of covalently bonded imine-based discrete nanostructures as well as one-dimensional (1D) polymers and two-dimensional (2D) covalent organic frameworks (COFs) physisorbed on solid substrates under various experimental conditions, for example, under ultra-high vacuum (UHV) or at the solid–liquid interface. Scanning tunneling microscopy (STM) was used to gain insight, with a sub-nanometer resolution, into the structure and properties of those complex nanopatterns

2D materials beyond graphene for high-performance energy storage applications

Energy crisis is one of the most urgent and critical issues in our modern society. Currently, there is an increasing demand for efficient, low-cost, light-weight, flexible and environmentally benign, small-, medium-, and large-scale energy storage devices, which can be used to power smart grids, portable electronic devices, and electric vehicles. Novel electrode materials, with a high energy density at high power are urgently needed for realizing high-performance energy storage devices. The recent development in the field of 2D materials, including both graphene and other layered systems, has shown promise for a wide range of applications. In particular, graphene analogues, due to their remarkable electrochemical properties, have shown great potential in energy-related applications. This review aims at providing an overview of current research and important advances on the development of 2D materials beyond graphene for supercapacitors and batteries. The major challenges to be tackled, and more generally the future directions in the field, are also highlighted

Guanosine-based hydrogen-bonded 2D scaffolds: Metal-free formation of G-quartet and G-ribbon architectures at the solid/liquid interface

We report on the synthesis and self-assembly of three novel lipophilic guanosine derivatives exposing a ferrocene moiety in the C(50) position of the sugar unit. Their self-association in solution, and at the solid/ liquid interface, can be tuned by varying the size and nature of the C(8)-substituent, leading to the generation of either G-ribbons, lamellar G-dimer based arrays or the G4 cation-free architecture

Photoisomerisation and light-induced morphological switching of a polyoxometalate–azobenzene hybrid

The functionalization of a spherical Keplerate-type polyoxometalate {Mo72V30} with a cationic azobenzene surfactant has been achieved through ionic self-assembly. The photoisomerisation reaction of this complex, which emerges in a light-triggered aggregation–disaggregation process, has been followed by 1H NMR spectroscopy, dynamic light scattering, absorption spectroscopy and scanning electron microscopy analyses

Chemical sensing with 2D materials

During the last decade, two-dimensional materials (2DMs) have attracted great attention due to their unique chemical and physical properties, which make them appealing platforms for diverse applications in opto-electronic devices, energy generation and storage, and sensing. Among their various extraordinary properties, 2DMs possess high surface area-to-volume ratios and ultra-high surface sensitivity to the environment, which are key characteristics for applications in chemical sensing. Furthermore, 2DMs’ superior electrical and optical properties, combined with their excellent mechanical characteristics such as robustness and flexibility, make these materials ideal components for the fabrication of a new generation of high-performance chemical sensors. Depending on the specific device, 2DMs can be tailored to interact with various chemical species at the non-covalent level, making them powerful platforms for fabricating devices exhibiting a high sensitivity towards detection of various analytes including gases, ions and small biomolecules. Here, we will review the most enlightening recent advances in the field of chemical sensors based on atomically-thin 2DMs and we will discuss the opportunities and the challenges towards the realization of novel hybrid materials and sensing devices

Concentration-dependent supramolecular patterns of C3 and C2 symmetric molecules at the solid/liquid interface

Here we report on a scanning tunnelling microscopy (STM) investigation on the self-assembly of C3- and C2-symmetric molecules at the solution/graphite interface. 1,3,5-tris((E)-2-(pyridin-4-yl)vinyl)benzene and 1,1,2,2-tetrakis(4-(pyridin-4-yl)phenyl)ethane are used as model systems. These molecules displayed a concentration dependent self-assembly behaviour on graphite, resulting in highly ordered supramolecular structures, which are stabilized jointly by van der Waals substrate-adsorbate interactions and in-plane intermolecular H-bonding. Denser packing is obtained when applying a relatively high concentration solution to the basal plane of the surface whereas a less dense porous network is observed upon lowering the concentration. We show that the molecular conformation does not influence the stability of the self-assembly and a twisted molecule can pack into dense and porous architectures under the concentration effect