DPRS transformer - Dynamic pressure resistant system - Part I

In general, a transformer is designed and manufactured to operate under normal conditions. However, unexpected fault events occur due to various reasons in real-life substations. When such events do occur, an electric arc inside a transformer vaporizes the insulating oil, leading to a generation of very high expansion pressure. Once this pressure exceeds the designed threshold, the tank is then compromised, and oil starts to leak, becoming a potential cause of fire or explosion. DPRS (Dynamic Pressure Resistant System) transformer has been developed to cope with such unexpected events. In general, a PRD (Pressure Relief Device) is installed on a transformer to stabilize the pressure inside the tank. However, it requires a certain amount of time for this device to operate. DPRS transformer is designed to withstand the immediate pressure increase without severely damaging the tank (severe enough to cause an oil leak) until the PRD starts operating. Although not as much as to cause a leak, the tank will still be deformed as a result of the pressure increase. Then, insulating oil expanded by the arc is emitted safely through a designated path as the PRD starts to operate. DPRS transformer does not require additional equipment to prevent damage to the tank and is also capable of preventing fire while maintaining a similar configuration to common transformers. Due to these merits, the global demand for DPRS transformers is steadily increasing. In this article, the DPRS transformer tank design procedure and tank deformation prediction technology are presented. Additionally, a brief introduction to the explosion-proof performance verification test is addressed

Management of portal hypertensive gastropathy and other bleeding

A major cause of cirrhosis related morbidity and mortality is the development of variceal bleeding, a direct consequence of portal hypertension. Less common causes of gastrointestinal bleeding are peptic ulcers, malignancy, angiodysplasia, etc. Upper gastrointestinal bleeding has been classified according to the presence of a variceal or non-variceal bleeding. Although non-variceal gastrointestinal bleeding is not common in cirrhotic patients, gastroduodenal ulcers may develop as often as non-cirrhotic patients. Ulcers in cirrhotic patients may be more severe and less frequently associated with chronic intake of non-steroidal anti-inflammatory drugs, and may require more frequently endoscopic treatment. Portal hypertensive gastropathy (PHG) refers to changes in the mucosa of the stomach in patients with portal hypertension. Patients with portal hypertension may experience bleeding from the stomach, and pharmacologic or radiologic interventional procedure may be useful in preventing re-bleeding from PHG. Gastric antral vascular ectasia (GAVE) seems to be different disease entity from PHG, and endoscopic ablation can be the first-line treatment

Localized Dielectric Loss Heating in Dielectrophoresis Devices

Temperature increases during dielectrophoresis (DEP) can affect the response of biological entities, and ignoring the effect can result in misleading analysis. The heating mechanism of a DEP device is typically considered to be the result of Joule heating and is overlooked without an appropriate analysis. Our experiment and analysis indicate that the heating mechanism is due to the dielectric loss (Debye relaxation). A temperature increase between interdigitated electrodes (IDEs) has been measured with an integrated micro temperature sensor between IDEs to be as high as 70 °C at 1.5 MHz with a 30 Vpp applied voltage to our ultra-low thermal mass DEP device. Analytical and numerical analysis of the power dissipation due to the dielectric loss are in good agreement with the experiment data

A Novel On-chip Three-dimensional Micromachined Calorimeter with Fully Enclosed and Suspended Thin-film Chamber for Thermal Characterization of Liquid Samples

A microfabricated calorimeter (μ-calorimeter) with an enclosed reaction chamber is presented. The 3D micromachined reaction chamber is capable of analyzing liquid samples with volume of 200 nl. The thin film low-stress silicon nitride membrane is used to reduce thermal mass of the calorimeter and increase the sensitivity of system. The μ-calorimeter has been designed to perform DC and AC calorimetry, thermal wave analysis, and differential scanning calorimetry. The μ-calorimeter fabricated with an integrated heater and a temperature sensor on opposite sides of the reaction chamber allows to perform thermal diffusivity and specific heat measurements on liquid samples with same device. Measurement results for diffusivity and heat capacitance using time delay method and thermal wave analysis are presented

Treatment of instability with scapular notching and glenoid component loosing by partial mixed different implant revision

In general, reverse shoulder arthroplasty revision is performed using the same implant for both the humerus and glenoid components. However, the authors of the present case used different implants from what was used previously for treating instability with scapular notching and glenoid aseptic loosening and report the case