Real-time simulation model of the HL-20 lifting body

A proposed manned spacecraft design, designated the HL-20, has been under investigation at Langley Research Center. Included in that investigation are flight control design and flying qualities studies utilizing a man-in-the-loop real-time simulator. This report documents the current real-time simulation model of the HL-20 lifting body vehicle, known as version 2.0, presently in use at NASA Langley Research Center. Included are data on vehicle aerodynamics, inertias, geometries, guidance and control laws, and cockpit displays and controllers. In addition, trim case and dynamic check case data is provided. The intent of this document is to provide the reader with sufficient information to develop and validate an equivalent simulation of the HL-20 for use in real-time or analytical studies

Exploring the Association between Long-Term HPSA Designation and County Population-to-Physician Ratio

Federal, state, local and public health officials utilize Health Professional Shortage Area (HPSA) designations to manage health and physician workforce development in underserved regions. HPSA designation length by county was examined to determine if there is significant association with population-to-primary care physician ratio since the inception of HPSA designations in 1978. Counties were grouped in 5 categories based on consecutive designation length and analyzed with demographic variables. This report examines the relationship of long-term HPSA status and changes in primary care physician workforce

Exact 1-D Model for Coherent Synchrotron Radiation with Shielding and Bunch Compression

Coherent Synchrotron Radiation has been studied effectively using a 1-dimensional model for the charge distribution in the realm of small angle approximations and high energies. Here we use Jefimenko's form of Maxwell's equations, without such approximations, to calculate the exact wake-fields due to this effect in multiple bends and drifts. It has been shown before that the influence of a drift can propagate well into a subsequent bend. We show, for reasonable parameters, that the influence of a previous bend can also propagate well into a subsequent bend, and that this is especially important at the beginning of a bend. Shielding by conducting parallel plates is simulated using the image charge method. We extend the formalism to situations with compressing and decompressing distributions, and conclude that simpler approximations to bunch compression usually overestimates the effect. Additionally, an exact formula for the coherent power radiated by a Gaussian bunch is derived by considering the coherent synchrotron radiation spectrum, and is used to check the accuracy of wake-field calculations

Optimum satellite relay positions with application to a TDRS-1 Indian Ocean relay

An Indian Ocean satellite relay is examined. The relay satellite position is optimized by minimizing the sum of downlink and satellite to satellite link losses. Osculating orbital elements are used for fast intensive orbital computation. Integrated Van Vleck gaseous attenuation and a Crane rain model are used for downlink attenuation. Circular polarization losses on the satellite to satellite link are found dynamically. Space to ground link antenna pointing losses are included as a function of yaw ans spacecraft limits. Relay satellite positions between 90 to 100 degrees East are found attractive for further study

Downlink Probability Density Functions for EOS-McMurdo Sound

The visibility times and communication link dynamics for the Earth Observations Satellite (EOS)-McMurdo Sound direct downlinks have been studied. The 16 day EOS periodicity may be shown with the Goddard Trajectory Determination System (GTDS) and the entire 16 day period should be simulated for representative link statistics. We desire many attributes of the downlink, however, and a faster orbital determination method is desirable. We use the method of osculating elements for speed and accuracy in simulating the EOS orbit. The accuracy of the method of osculating elements is demonstrated by closely reproducing the observed 16 day Landsat periodicity. An autocorrelation function method is used to show the correlation spike at 16 days. The entire 16 day record of passes over McMurdo Sound is then used to generate statistics for innage time, outage time, elevation angle, antenna angle rates, and propagation loss. The levation angle probability density function is compared with 1967 analytic approximation which has been used for medium to high altitude satellites. One practical result of this comparison is seen to be the rare occurrence of zenith passes. The new result is functionally different than the earlier result, with a heavy emphasis on low elevation angles. EOS is one of a large class of sun synchronous satellites which may be downlinked to McMurdo Sound. We examine delay statistics for an entire group of sun synchronous satellites ranging from 400 km to 1000 km altitude. Outage probability density function results are presented three dimensionally

Design and characterization of optical-THz phase-matched traveling-wave photomixers

Design and characterization of optical-THz phase-matched traveling-wave photomixers for difference-frequency generation of THz waves are presented. A de-biased coplanar stripline fabricated on low-temperature-grown GaAs is illuminated by two non-collinear laser beams which generate moving interference fringes that are accompanied by THz waves. By tuning the offset angle between the two laser beams, the velocity of the interference fringe can be matched to the phase velocity of the THz wave in the coplanar stripline. The generated THz waves are radiated into free space by the antenna at the termination of the stripline. Enhancement of the output power was clearly observed when the phase-matching condition was satisfied. The output power spectrum has a 3-dB bandwidth of 2 THz and rolls off as ~9 dB/Oct which is determined by the frequency dependent attenuation in the stripline, while the bandwidth of conventional photomixer design has the limitation by the RC time constant due to the electrode capacitance. The device can handle the laser power of over 380 mW, which is 5 times higher than the maximum power handring capability of conventional small area devices. The results show that the traveling-wave photomixers have the potential to surpass small area designs, especially at higher frequencies over I THz, owing to their great thermal dissipation capability and capacitance-free wide bandwidth

A traveling-wave THz photomixer based on angle-tuned phase matching

A traveling-wave THz photomixer based on a free-space optical-THz phase-matching scheme is proposed. A dc-biased coplanar strip line fabricated on low-temperature-grown GaAs serves as the active area of the device, and is illuminated by two noncollinear laser beams which generate interference fringes that are accompanied by THz waves. The device with the laser-power-handling capability over 300 mW and a 3-dB bandwidth of 1.8 THz was experimentally demonstrated. The results show that traveling-wave photomixers have the potential to surpass small-area designs

Burnout Prevalence in PA Students

2016 AAPA Poster Session Abstrac

Calculating the Expected Value of Sample Information in Practice: Considerations from Three Case Studies

Investing efficiently in future research to improve policy decisions is an important goal. Expected Value of Sample Information (EVSI) can be used to select the specific design and sample size of a proposed study by assessing the benefit of a range of different studies. Estimating EVSI with the standard nested Monte Carlo algorithm has a notoriously high computational burden, especially when using a complex decision model or when optimizing over study sample sizes and designs. Therefore, a number of more efficient EVSI approximation methods have been developed. However, these approximation methods have not been compared and therefore their relative advantages and disadvantages are not clear. A consortium of EVSI researchers, including the developers of several approximation methods, compared four EVSI methods using three previously published health economic models. The examples were chosen to represent a range of real-world contexts, including situations with multiple study outcomes, missing data, and data from an observational rather than a randomized study. The computational speed and accuracy of each method were compared, and the relative advantages and implementation challenges of the methods were highlighted. In each example, the approximation methods took minutes or hours to achieve reasonably accurate EVSI estimates, whereas the traditional Monte Carlo method took weeks. Specific methods are particularly suited to problems where we wish to compare multiple proposed sample sizes, when the proposed sample size is large, or when the health economic model is computationally expensive. All the evaluated methods gave estimates similar to those given by traditional Monte Carlo, suggesting that EVSI can now be efficiently computed with confidence in realistic examples.Comment: 11 pages, 3 figure