On the linewidth enhancement factor alpha in semiconductor injection lasers

A simple model for the linewidth enhancement factor alpha and its frequency dependence in semiconductor lasers is presented. Calculations based on this model are in reasonable agreement with experimental results

Carrier leakage and temperature dependence of InGaAsP lasers

A direct measurement of electron and hole leakage in InGaAsP/InP lasers has been carried out. The effect of electron leakage on the temperature sensitivity of InGaAsP/InP lasers has been revealed

Direct measurement of the carrier leakage in an InGaAsP/InP laser

Carrier leakage over the heterobarrier in an InGaAsP/InP laser is measured directly in a laser-bipolar-transistor structure. Experimental results indicate a significant amount of carrier leakage under normal laser operating conditions

Low threshold InGaAsP terrace mass transport laser on semi-insulating substrate

Very low threshold InGaAsP terrace lasers on semi-insulating (SI) InP substrate have been fabricated using the mass transport technique. The fabrication process involves a single-step liquid phase epitaxial (LPE) growth followed by a mass transport of InP at ~675 °C in the presence of an InP cover wafer. Lasers operating in the fundamental transverse mode with smooth far-field patterns and threshold currents as low as 9.5 mA have been obtained

Damage coefficients in low resistivity silicon

Electron and proton damage coefficients are determined for low resistivity silicon based on minority-carrier lifetime measurements on bulk material and diffusion length measurements on solar cells. Irradiations were performed on bulk samples and cells fabricated from four types of boron-doped 0.1 ohm-cm silicon ingots, including the four possible combinations of high and low oxygen content and high and low dislocation density. Measurements were also made on higher resistivity boron-doped bulk samples and solar cells. Major observations and conclusions from the investigation are discussed

Very low threshold InGaAsP mesa laser

Very low threshold currents InGaAsP/InP terrace mesa (T-ME) lasers with an unpassivated surface have been fabricated on semi-insulating (SI) InP substrates. Fabrication of the lasers involves a single-step liquid phase epitaxial (LPE) growth and a simple etching process. Lasers operating in the fundamental transverse mode with threshold currents as low as 6.3 mA (for a cavity length of 250 μm) have been obtained. Comparison between the unpassivated lasers and those passivated using the mass transport technique is described

InGaAsP/InP undercut mesa laser with planar polyimide passivation

An undercut mesa laser is fabricated on an n + -InP substrate using a single step liquid phase epitaxy growth process and a planar structure is obtained by using a polyimide filling layer. The lasers operate at fundamental transverse mode due to a scattering loss mechanism. Threshold currents of 18 mA and stable single transverse mode operating at high currents are obtained