Development of EHD Ion-Drag Micropump for Microscale Electronics Cooling Systems

In this investigation, the numerical simulation of electrohydrodynamic (EHD) ion-drag micropumps with micropillar electrode geometries have been performed. The effect of micropillar height and electrode spacing on the performance of the micropumps was investigated. The performance of the EHD micropump improved with increased applied voltage and decreased electrode spacing. The optimum micropillar height for the micropump with electrode spacing of 40$\mu$m and channel height of 100$\mu$m at 200V was 40$\mu$m, where a maximum mass flow rate of 0.18g/min was predicted. Compared to that of planar electrodes, the 3D micropillar electrode geometry enhanced the overall performance of the EHD micropumps.Comment: Submitted on behalf of TIMA Editions (http://irevues.inist.fr/tima-editions

Disorder in DNA-Linked Gold Nanoparticle Assemblies

We report experimental observations on the effect of disorder on the phase behavior of DNA-linked nanoparticle assemblies. Variation in DNA linker lengths results in different melting temperatures of the DNA-linked nanoparticle assemblies. We observed an unusual trend of a non-monotonic ``zigzag'' pattern in the melting temperature as a function of DNAlinker length. Linker DNA resulting in unequal DNA duplex lengths introduces disorder and lowers the melting temperature of the nanoparticle system. Comparison with free DNA thermodynamics shows that such an anomalous zigzag pattern does not exist for free DNA duplex melting, which suggests that the disorder introduced by unequal DNA duplex lengths results in this unusual collective behavior of DNA-linked nanoparticle assemblies.Comment: 4 pages, 4 figures, Phys.Rev.Lett. (2005), to appea

Microscopic Description of Band Structure at Very Extended Shapes in the A ~ 110 Mass Region

Recent experiments have confirmed the existence of rotational bands in the A \~ 110 mass region with very extended shapes lying between super- and hyper-deformation. Using the projected shell model, we make a first attempt to describe quantitatively such a band structure in 108Cd. Excellent agreement is achieved in the dynamic moment of inertia J(2) calculation. This allows us to suggest the spin values for the energy levels, which are experimentally unknown. It is found that at this large deformation, the sharply down-sloping orbitals in the proton i_{13/2} subshell are responsible for the irregularity in the experimental J(2), and the wave functions of the observed states have a dominant component of two-quasiparticles from these orbitals. Measurement of transition quadrupole moments and g-factors will test these findings, and thus can provide a deeper understanding of the band structure at very extended shapes.Comment: 4 pages, 3 eps figures, final version accepted by Phys. Rev. C as a Rapid Communicatio

Real-time Loss Estimation for Instrumented Buildings

Motivation. A growing number of buildings have been instrumented to measure and record earthquake motions and to transmit these records to seismic-network data centers to be archived and disseminated for research purposes. At the same time, sensors are growing smaller, less expensive to install, and capable of sensing and transmitting other environmental parameters in addition to acceleration. Finally, recently developed performance-based earthquake engineering methodologies employ structural-response information to estimate probabilistic repair costs, repair durations, and other metrics of seismic performance. The opportunity presents itself therefore to combine these developments into the capability to estimate automatically in near-real-time the probabilistic seismic performance of an instrumented building, shortly after the cessation of strong motion. We refer to this opportunity as (near-) real-time loss estimation (RTLE). Methodology. This report presents a methodology for RTLE for instrumented buildings. Seismic performance is to be measured in terms of probabilistic repair cost, precise location of likely physical damage, operability, and life-safety. The methodology uses the instrument recordings and a Bayesian state-estimation algorithm called a particle filter to estimate the probabilistic structural response of the system, in terms of member forces and deformations. The structural response estimate is then used as input to component fragility functions to estimate the probabilistic damage state of structural and nonstructural components. The probabilistic damage state can be used to direct structural engineers to likely locations of physical damage, even if they are concealed behind architectural finishes. The damage state is used with construction cost-estimation principles to estimate probabilistic repair cost. It is also used as input to a quantified, fuzzy-set version of the FEMA-356 performance-level descriptions to estimate probabilistic safety and operability levels. CUREE demonstration building. The procedure for estimating damage locations, repair costs, and post-earthquake safety and operability is illustrated in parallel demonstrations by CUREE and Kajima research teams. The CUREE demonstration is performed using a real 1960s-era, 7-story, nonductile reinforced-concrete moment-frame building located in Van Nuys, California. The building is instrumented with 16 channels at five levels: ground level, floors 2, 3, 6, and the roof. We used the records obtained after the 1994 Northridge earthquake to hindcast performance in that earthquake. The building is analyzed in its condition prior to the 1994 Northridge Earthquake. It is found that, while hindcasting of the overall system performance level was excellent, prediction of detailed damage locations was poor, implying that either actual conditions differed substantially from those shown on the structural drawings, or inappropriate fragility functions were employed, or both. We also found that Bayesian updating of the structural model using observed structural response above the base of the building adds little information to the performance prediction. The reason is probably that Real-Time Loss Estimation for Instrumented Buildings ii structural uncertainties have only secondary effect on performance uncertainty, compared with the uncertainty in assembly damageability as quantified by their fragility functions. The implication is that real-time loss estimation is not sensitive to structural uncertainties (saving costly multiple simulations of structural response), and that real-time loss estimation does not benefit significantly from installing measuring instruments other than those at the base of the building. Kajima demonstration building. The Kajima demonstration is performed using a real 1960s-era office building in Kobe, Japan. The building, a 7-story reinforced-concrete shearwall building, was not instrumented in the 1995 Kobe earthquake, so instrument recordings are simulated. The building is analyzed in its condition prior to the earthquake. It is found that, while hindcasting of the overall repair cost was excellent, prediction of detailed damage locations was poor, again implying either that as-built conditions differ substantially from those shown on structural drawings, or that inappropriate fragility functions were used, or both. We find that the parameters of the detailed particle filter needed significant tuning, which would be impractical in actual application. Work is needed to prescribe values of these parameters in general. Opportunities for implementation and further research. Because much of the cost of applying this RTLE algorithm results from the cost of instrumentation and the effort of setting up a structural model, the readiest application would be to instrumented buildings whose structural models are already available, and to apply the methodology to important facilities. It would be useful to study under what conditions RTLE would be economically justified. Two other interesting possibilities for further study are (1) to update performance using readily observable damage; and (2) to quantify the value of information for expensive inspections, e.g., if one inspects a connection with a modeled 50% failure probability and finds that the connect is undamaged, is it necessary to examine one with 10% failure probability

Human parathyroid hormone fragment stimulates the de novo synthesis of prostaglandin endoperoxide synthase in chick calvaria

The human parathyroid hormone N-terminal fragment [hPTH-(1–34)] increases the conversion of exogenous unsaturated fatty acids to prostaglandins (PGs) in calvarial homogenates. Enzyme activities were completely blocked by indomethacin (5 × 10−7 M), a PG synthase inhibitor, and actinomycin D (5 μM), an inhibitor of transcription, by binding to DNA. In addition, a potent inhibitor of protein synthesis, cycloheximide (10 μM), totally inhibited the stimulating effect of hPTH-(1–34) on prostaglandin endoperoxide synthase (PG synthase, EC 1.14.99.1). The stimulatory effect of hPTH-(1–34) on PG synthase was also reduced by the addition of stannous chloride. However, epidermal growth factor (EGF), platelet-derived activating factor (PDGF), and ionophore A23187 did not show the same stimulating effect as hPTH-(1–34) on PG synthase in calvaria. The results further demonstrated that PG synthase is a membrane-bound enzyme in chick calvaria. In this communication, evidence is presented that hPTH-(1–34) stimulates the de novo synthesis of PG synthase as demonstrated by the increased activity in calvarial homogenates and microsomes

A Systematic Framework to Derive N-glycan Biosynthesis Process and the Automated Construction of Glycosylation Networks

published_or_final_versio

Towards Prediction of Pancreatic Cancer Using SVM Study Model

published_or_final_versio

Probability Density Function of Longitudinal Velocity Increment in Homogeneous Turbulence

Two conditional averages for the longitudinal velocity increment u_r of the simulated turbulence are calculated: h(u_r) is the average of the increment of the longitudinal Laplacian velocity field with u_r fixed, while g(u_r) is the corresponding one of the square of the difference of the gradient of the velocity field. Based on the physical argument, we suggest the formulae for h and g, which are quite satisfactorily fitted to the 512^3 DNS data. The predicted PDF is characterized as (1) the Gaussian distribution for the small amplitudes, (2) the exponential distribution for the large ones, and (3) a prefactor before the exponential function for the intermediate ones.Comment: 4 pages, 4 figures, using RevTeX3.

Passive Scalar: Scaling Exponents and Realizability

An isotropic passive scalar field $T$ advected by a rapidly-varying velocity field is studied. The tail of the probability distribution $P(\theta,r)$ for the difference $\theta$ in $T$ across an inertial-range distance $r$ is found to be Gaussian. Scaling exponents of moments of $\theta$ increase as $\sqrt{n}$ or faster at large order $n$, if a mean dissipation conditioned on $\theta$ is a nondecreasing function of $|\theta|$. The $P(\theta,r)$ computed numerically under the so-called linear ansatz is found to be realizable. Some classes of gentle modifications of the linear ansatz are not realizable.Comment: Substantially revised to conform with published version. Revtex (4 pages) with 2 postscript figures. Send email to [email protected]

High-Order Contamination in the Tail of Gravitational Collapse

It is well known that the late-time behaviour of gravitational collapse is {\it dominated} by an inverse power-law decaying tail. We calculate {\it higher-order corrections} to this power-law behaviour in a spherically symmetric gravitational collapse. The dominant ``contamination'' is shown to die off at late times as $M^2t^{-4}\ln(t/M)$. This decay rate is much {\it slower} than has been considered so far. It implies, for instance, that an `exact' (numerical) determination of the power index to within $\sim 1$ requires extremely long integration times of order $10^4 M$. We show that the leading order fingerprint of the black-hole electric {\it charge} is of order $Q^2t^{-4}$.Comment: 12 pages, 2 figure