209 research outputs found
Ultrafast broadband optical modulation in indium tin oxide/titanium dioxide 1D photonic crystal
Photonic crystals can integrate plasmonic materials such as Indium Tin Oxide (ITO) in their structure. Exploiting ITO plasmonic properties, it is possible to tune the photonic band gap of the photonic crystal upon the application of an external stimuli. In this work, we have fabricated a one-dimensional multilayer photonic crystal alternating ITO and Titanium Dioxide (TiO2) via radio frequency sputtering and we have triggered its optical response with ultrafast pump-probe spectroscopy. Upon photoexcitation, we observe a change in the refractive index of ITO. Such an effect has been used to create a photonic crystal that changes its photonic bandgap in an ultrafast time scale. All optical modulation in the visible region, that can be tuned by designing the photonic crystal, has been demonstrated
Aluminum effect on photoluminescence properties of sol–gel-derived Eu3+-activated silicate glasses
Clustering of rare earth in glasses, aluminum effect: experiments and modeling
Luminescent spectra of Eu3+-doped sol-gel glasses have been analyzed during the densification process and compared according to the presence or not of aluminum as a codoping ion. A transition temperature from hydrated to dehydroxyled environments has been found different for doped and codoped samples. However, only slight modifications have been displayed from luminescence measurements beyond this transition. To support the experimental analysis, molecular dynamics simulations have been performed to model the doped and codoped glass structures. Despite no evidence of rare earth clustering reduction due to aluminum has been found, the modeled structures have shown that the luminescent ions are mainly located in aluminum-rich domains. The synthesis of both experimental and numerical analyses has lead us to interpret the aluminum effect as responsible for differences in structure of the luminescent sites rather than for an effective dispersion of the rare earth ions. (C) 2004 Elsevier B.V. All rights reserved
Rare Earth-Activated Silica-Based Nanocomposites
Two different kinds of rare earth-activated glass-based nanocomposite photonic materials, which allow to tailor the spectroscopic properties of rare-earth ions: (i) Er3+-activated SiO2-HfO2 waveguide glass ceramic, and (ii) core-shell-like structures of Er3+-activated silica spheres obtained by a seed growth method, are presented
Er3+ and Ce3+ Co-Doped Tellurite Optical Fiber for Lasers And Amplifiers in the Near Infrared Wavelength Region: Fabrication, Optical Characterization and Prospects
Electro-responsivity in electrolyte-free and solution processed Bragg stacks
Achieving an active manipulation of colours has huge implications in optoelectronics, as colour engineering can be exploited in a number of applications, ranging from display to lightning. In the last decade, the synergy of the highly pure colours of 1D photonic crystals, also known as Bragg stacks, with electro-tunable materials have been proposed as an interesting route to attain such a technologically relevant effect. However, recent works rely on the use of liquid electrolytes, which can pose issues in terms of chemical and environmental stability. Here, we report on the proof-of-concept of an electrolyte free and solution-processed electro-responsive Bragg stack. We integrate an electro-responsive plasmonic metal oxide, namely indium tin oxide, in a 1D photonic crystal structure made of alternating layers of ITO and TiO2 nanoparticles. In such a device, we observed a maximum of 23 nm blue-shift upon the application of an external bias (10 V). Our data suggest that electrochromism can be attained in all-solid state systems by combining a judicious selection of the constituent materials with device architecture optimisation. This journal i
Sol–gel-derived photonic structures handling erbium ions luminescence
The sol–gel technique is a very flexible, relatively simple, and low-cost method to fabricate many different innovative photonic structures characterized by specific functionalities. During synthesis, starting from the molecular level, compounds or composites with well controlled composition can be obtained as thin films, powders or monoliths. These materials can be used to prepare such structures as waveguides, photonic crystals, coatings, and bulk glasses including spheres, rings and other geometries exploited in optical resonators fabrication. This article presents some results obtained by the authors in the field of the sol–gel-derived photonic structures. To emphasise the scientific and technological interest in this kind of systems and the versatility of the sol–gel route, the glass-based nano and micrometer scale range systems are discussed. Particularly, the following systems are described: silica–hafnia glass and glass–ceramic planar waveguides, nanosized tetraphosphates, and silica colloidal crystals. The attention is focused on the spectroscopic properties of Er3+-activated materials that due to the light emission can be used in the integrated optics area covering application in sensing, biomedical diagnostic, energy conversion, telecommunication, lighting, and photon management
Erbium-activated monolithic silica xerogels and silica-titania planar waveguides: optical and spectroscopic characterization
Numerical modeling of the impact of pump wavelength on Yb-doped fiber amplifier performance
Ytterbium-doped optical amplifiers have become common tools for industrial applications due to their high efficiency, relatively low cost and potentially very high output power level. The efficiency of an ytterbium-doped fiber amplifier depends mainly on the absorption of pump radiation, and, therefore, optimum pump wavelengths have been proposed such as 915 nm. However, the semiconductor pump diodes batch supplied by manufacturers may exhibit a spread in the output wavelength. This paper theoretically investigates the performance of Yb-doped amplifiers for different pump wavelengths and defines the pump power penalty when the pump source does not emit at the optimum wavelength. The penalty has been defined as normalized excess pump power required to achieve the desired gain
Er3+ ion dispersion in tellurium oxychloride glasses
Erbium-doped tellurite glasses in the 60TeO2–20ZnO–20ZnCl2–xErCl3 systems, with erbium concentration between x = 1 and 10 mol%, were prepared and their refractive index and density were measured. Er3+ photoluminescence at 1.5 μm and the corresponding lifetime measurements were performed. A full width at half maximum value of about 53 nm for all the samples and lifetimes ranging between 4.2 and of 2.2 ms were obtained from the comparison of the radiative lifetimes calculated by Judd–Ofelt analysis and the measured lifetimes, quantum efficiency higher than 50% was assessed even in the most doped samples. A quenching concentration for the 1.5 μm emission of about 10% was estimated
- …