211 research outputs found
Disentangled Causal Graph Learning forOnline Unsupervised Root Cause Analysis
The task of root cause analysis (RCA) is to identify the root causes of
system faults/failures by analyzing system monitoring data. Efficient RCA can
greatly accelerate system failure recovery and mitigate system damages or
financial losses. However, previous research has mostly focused on developing
offline RCA algorithms, which often require manually initiating the RCA
process, a significant amount of time and data to train a robust model, and
then being retrained from scratch for a new system fault.
In this paper, we propose CORAL, a novel online RCA framework that can
automatically trigger the RCA process and incrementally update the RCA model.
CORAL consists of Trigger Point Detection, Incremental Disentangled Causal
Graph Learning, and Network Propagation-based Root Cause Localization. The
Trigger Point Detection component aims to detect system state transitions
automatically and in near-real-time. To achieve this, we develop an online
trigger point detection approach based on multivariate singular spectrum
analysis and cumulative sum statistics. To efficiently update the RCA model, we
propose an incremental disentangled causal graph learning approach to decouple
the state-invariant and state-dependent information. After that, CORAL applies
a random walk with restarts to the updated causal graph to accurately identify
root causes. The online RCA process terminates when the causal graph and the
generated root cause list converge. Extensive experiments on three real-world
datasets with case studies demonstrate the effectiveness and superiority of the
proposed framework
Differentially Private Generative Adversarial Networks with Model Inversion
To protect sensitive data in training a Generative Adversarial Network (GAN),
the standard approach is to use differentially private (DP) stochastic gradient
descent method in which controlled noise is added to the gradients. The quality
of the output synthetic samples can be adversely affected and the training of
the network may not even converge in the presence of these noises. We propose
Differentially Private Model Inversion (DPMI) method where the private data is
first mapped to the latent space via a public generator, followed by a
lower-dimensional DP-GAN with better convergent properties. Experimental
results on standard datasets CIFAR10 and SVHN as well as on a facial landmark
dataset for Autism screening show that our approach outperforms the standard
DP-GAN method based on Inception Score, Fr\'echet Inception Distance, and
classification accuracy under the same privacy guarantee.Comment: Best Student Paper Award of 13th IEEE International Workshop on
Information Forensics and Security (WIFS 2021), Montpellier, Franc
Interfacial Interaction Enhanced Rheological Behavior in PAM/CTAC/Salt Aqueous Solution—A Coarse-Grained Molecular Dynamics Study
Interfacial interactions within a multi-phase polymer solution play critical roles in processing control and mass transportation in chemical engineering. However, the understandings of these roles remain unexplored due to the complexity of the system. In this study, we used an efficient analytical method—a nonequilibrium molecular dynamics (NEMD) simulation—to unveil the molecular interactions and rheology of a multiphase solution containing cetyltrimethyl ammonium chloride (CTAC), polyacrylamide (PAM), and sodium salicylate (NaSal). The associated macroscopic rheological characteristics and shear viscosity of the polymer/surfactant solution were investigated, where the computational results agreed well with the experimental data. The relation between the characteristic time and shear rate was consistent with the power law. By simulating the shear viscosity of the polymer/surfactant solution, we found that the phase transition of micelles within the mixture led to a non-monotonic increase in the viscosity of the mixed solution with the increase in concentration of CTAC or PAM. We expect this optimized molecular dynamic approach to advance the current understanding on chemical–physical interactions within polymer/surfactant mixtures at the molecular level and enable emerging engineering solutions
An improved image fusion approach based on enhanced spatial and temporal the adaptive reflectance fusion model
High spatiotemporal resolution satellite imagery is useful for natural resource management and monitoring for land-use and land-cover change and ecosystem dynamics. However, acquisitions from a single satellite can be limited, due to trade-offs in either spatial or temporal resolution. The spatial and temporal adaptive reflectance fusion model (STARFM) and the enhanced STARFM (ESTARFM) were developed to produce new images with high spatial and high temporal resolution using images from multiple sources. Nonetheless, there were some shortcomings in these models, especially for the procedure of searching spectrally similar neighbor pixels in the models. In order to improve these modelsâ?? capacity and accuracy, we developed a modified version of ESTARFM (mESTARFM) and tested the performance of two approaches (ESTARFM and mESTARFM) in three study areas located in Canada and China at different time intervals. The results show that mESTARFM improved the accuracy of the simulated reflectance at fine resolution to some extent
Propagation Characteristics of Explosive Waves in Layered Media Numerical Analysis
The layered media under one-dimensional strain with different wave-impedance materials have been studied. The three typical prototypes have been analysized, including steel plate, aluminum foam, and concrete as the middle layer, and the upper and lower layers are concrete material. The attenuation of the amplitude of stress at different positions, the peak stress and the duration at the dissimilar material interface, and the absorbing energy distribution in different layers for different models have been obtained by numerical simulation. The material of the middle layer with lower impedance can effectively reduce the amplitude of stress, increase the duration of explosive wave, and change the distribution of energy in different layers. But the influence of the middle layer with higher impedance material on layered media is contrary. The middle layer with soft material is the better matching of wave impedance to explosive wave propagation. The analytical conclusions are of great significance for the design of protective structures against the explosion-induced hazards and minesafety protection from outburst and explosion.Defence Science Journal, 2009, 59(5), pp.499-504, DOI:http://dx.doi.org/10.14429/dsj.59.155
Investigation of temperature stress tolerance in Arabidopsis STTM165/166 using electrophysiology and RNA-Seq
Plant electrical signals have been shown to be generated in response to
various environmental stresses, but the relationship between these signals and
stress tolerance is not well understood. In this study, we used the Arabidopsis
STTM165/166 mutant, which exhibits enhanced temperature tolerance, to examine
this relationship. Surface recording techniques were utilized to compare the
generation ratio and duration characteristics of electrical signals in the
STTM165/166 mutant and wild type (WT). Patch-clamp recording was employed to
assess ion channel currents, specifically those of calcium ions. The current
intensity of the mutant was found to be lower than that of the WT. As calcium
ions are involved in the generation of plant electrical signals, we
hypothesized that the reduced calcium channel activity in the mutant increased
its electrical signal threshold. RNA-Seq analysis revealed differential
expression of AHA genes in the STTM165/166 mutant, which may contribute to the
prolonged depolarization phenotype. Gene Ontology enrichment of differentially
expressed genes (DEGs) identified associations between these DEGs and various
stresses, including temperature, salt, and those related to the jasmonic acid
and abscisic acid pathways. These findings provide experimental evidence for
the use of plant electrical signals in characterizing stress tolerance and
explore potential ion mechanisms through patch-clamp recording and DEG Gene
Ontology analysis. They also emphasize the need for further research on the
relationship between plant electrical signals and stress tolerance.Comment: 20 pages, 5 figure
Treatment of Danhong Injection Combined with Naoxintong Capsule in Acute Coronary Syndrome Patients Undergoing PCI Operation: Study for a Randomized Controlled and Double-Blind Trial
Improved performance of the rechargeable hybrid aqueous battery at near full state-of-charge
The final publication is available at Elsevier via https://dx.doi.org/10.1016/j.electacta.2018.03.152 © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/For the first time, a green lignin/silica nanocomposite (LSC) is introduced to the rechargeable hybrid aqueous Zn/LiMn2O4 battery (ReHAB) as additive in the cathode formulation. Lignin acts as a key role to regulate and control the structure of LSC, intending to enhance the stability of the ReHAB by improving the float charge performance while maintaining other electrochemical performances of the battery. The lignin/silica nanocomposites (LSCs) are characterized by X-ray diffraction, scanning electron microscopy, surface area and porosimetry analyzer, and transmission electron microscopy. The results show that amorphous, uniform and mesoporous LSC-1 is prepared at the mass ratio of 1:2 of lignin to silica. LSC-1 used as the cathode additive improves the float charge performance of ReHAB via decreasing the float charge capacity by 57%. To compensate the loss of conductivity caused by LSC-1 and increase the capacity of the battery, graphene (G) is added. Compared to the reference battery, battery using the cathode containing 3 wt% combined additive of LSC-1 and G at mass ratio of 1:1, has 50% lower float charge capacity, higher rate performance and better cyclability. Up to a discharge capacity of 95 mAh g−1 is still obtained after 300 cycles of 100% depth-of-discharge.National Natural Science Foundation of China [21436004]Natural Science Foundation of Guangdong Province [2017A030308012]Positec Canada Ltd.Chinese Scholarship Council (CSC
Active Power Dynamic Interval Control Based on Operation Data Mining for Wind Farms to Improve Regulation Performance in AGC'
Investigation on the impact of water on the competitive adsorption characteristics of CH4/CO2 in coal
In order to study the effect of water on the competitive adsorption of CH4/CO2 and mixed gases in coal, the self-developed multi-gas competitive adsorption experimental system of coal containing gas was used to conduct the research on the single component adsorption of CH4 and CO2 by coal with different water content. The experimental results show that: Water does not change the basic law of the isothermal adsorption curve of CH4 and CO2, and under the same conditions, water does not affect the ordering of coal's adsorption capacity for a single component of gas, and the adsorption capacity of coal for CO2 is always greater than that of CH4. Under the same conditions, the inhibition rate of water on CH4 is greater than that of CO2 adsorption capacity, indicating that the inhibition degree of water on coal's adsorption of weakly adsorbent gases is greater. The research on the effect of water on the competitive adsorption of mixed gas shows that: when the proportion of gas injected into the coal remains unchanged, under the same adsorption equilibrium pressure, the total adsorption of mixed gas decreases with the increase of water content, and the adsorption amount of CH4 and CO2 after adsorption equilibrium decreases with the increase of water content in the coal. When the water content is unchanged, the greater the gas adsorption equilibrium pressure under the same gas injection ratio, the greater the adsorption amount of CH4 and CO2 after adsorption equilibrium. The volume fraction of CO2 in the free phase is always lower than that of the gas source, while the volume fraction of CH4 is always higher than that of the gas source. Under different conditions, the values of CO2/CH4 selection coefficients are greater than 1, ranging from 4.8 to 5.4, and the adsorption affinity of coal for CO2 is greater than that of CH4. The selection coefficients of CO2/CH4 decrease with the increase of water content of coal samples under the same gas adsorption conditions. This study further improves the theoretical analysis of factors affecting coal gas adsorption, and provides a theoretical basis for engineering practice for underground gas injection and gas extraction technology
- …