15 research outputs found
Graphene field effect transistors with ferroelectric gating
Recent experiments on ferroelectric gating have introduced a novel
functionality, i.e. nonvolatility, in graphene field effect transistors. A
comprehensive understanding in the non-linear, hysteretic ferroelectric gating
and an effective way to control it are still absent. In this letter, we
quantitatively characterize the hysteretic ferroelectric gating using the
reference of an independent background doping (nBG) provided by normal
dielectric gating. More importantly, we prove that nBG can be used to control
the ferroelectric gating by unidirectionally shifting the hysteretic
ferroelectric doping in graphene. Utilizing this electrostatic effect, we
demonstrate symmetrical bit writing in graphene-ferroelectric FETs with
resistance change over 500% and reproducible no-volatile switching over 10^5
cycles.Comment: 5 Pages; 4 figures; two column forma
Gate-controlled non-volatile graphene-ferroelectric memory
In this letter, we demonstrate a non-volatile memory device in a graphene FET
structure using ferroelectric gating. The binary information, i.e. "1" and "0",
is represented by the high and low resistance states of the graphene working
channels and is switched by controlling the polarization of the ferroelectric
thin film using gate voltage sweep. A non-volatile resistance change exceeding
200% is achieved in our graphene-ferroelectric hybrid devices. The experimental
observations are explained by the electrostatic doping of graphene by electric
dipoles at the ferroelectric/graphene interface.Comment: 4 papes, 4 figure
Wafer-scale graphene/ferroelectric hybrid devices for low-voltage electronics
Preparing graphene and its derivatives on functional substrates may open
enormous opportunities for exploring the intrinsic electronic properties and
new functionalities of graphene. However, efforts in replacing SiO have
been greatly hampered by a very low sample yield of the exfoliation and related
transferring methods. Here, we report a new route in exploring new graphene
physics and functionalities by transferring large-scale chemical vapor
deposition single-layer and bilayer graphene to functional substrates. Using
ferroelectric Pb(ZrTi)O (PZT), we demonstrate ultra-low
voltage operation of graphene field effect transistors within V with
maximum doping exceeding and on-off ratios larger
than 10 times. After polarizing PZT, switching of graphene field effect
transistors are characterized by pronounced resistance hysteresis, suitable for
ultra-fast non-volatile electronics.Comment: 4 pages, 3 figures; EPL 2011; In pres
Graphene Memory Cell and Fabrication Methods Thereof
US20110170330A1Published Applicatio
IR Sensing: Exploiting the IR Transparency of Graphene for Fast Pyroelectric Infrared Detection (Advanced Optical Materials 1/2015)
Advanced Optical Materials3133-3
Unconventional Transport through Graphene on SrTiO3: A Plausible Effect of SrTiO3 Phase-Transitions
High-k dielectric oxides are supposedly ideal gate-materials for ultra-high doping in graphene and other 2D-crystals. Here, we report a temperature-dependent electronic transport study on chemical vapor deposited-graphene gated with SrTiO3 (STO) thin film substrate. At carrier densities away from charge neutrality point the temperature-dependent resistivity of our graphene samples on both STO and SiO2/Si substrates show metallic behavior with contributions from Coulomb scattering and flexural phonons attributable to the presence of characteristic quasi-periodic nano-ripple arrays. Significantly, for graphene samples on STO substrates we observe an anomalous 'slope-break' in the temperature-dependent resistivity for T = 50 to 100 K accompanied by a decrease in mobility above 30 K. Furthermore, we observe an unusual decrease in the gate-induced doping-rate at low temperatures, despite an increase in dielectric constant of the substrate. We believe that a complex mechanism is at play as a consequence of the structural phase transition of the underlying substrate showing an anomalous transport behavior in graphene on STO. The anomalies are discussed in the context of Coulomb as well as phonon scattering
Nanometer Thick Elastic Graphene Engine
Significant progress has been made
in the construction and theoretical
understanding of molecular motors because of their potential use.
Here, we have demonstrated fabrication of a simple but powerful 1
nm thick graphene engine. The engine comprises a high elastic membrane-piston
made of graphene and weakly chemisorbed ClF<sub>3</sub> molecules
as the high power volume changeable actuator, while a 532 nm LASER
acts as the ignition plug. Rapid volume expansion of the ClF<sub>3</sub> molecules leads to graphene blisters. The size of the blister is
controllable by changing the ignition parameters. The estimated internal
pressure per expansion cycle of the engine is about ∼10<sup>6</sup> Pa. The graphene engine presented here shows exceptional
reliability, showing no degradation after 10 000 cycles
Flexible graphene-PZT ferroelectric nonvolatile memory
10.1088/0957-4484/24/47/475202Nanotechnology2447-NNOT
Ultrathin Organic Solar Cells with Graphene Doped by Ferroelectric Polarization
Graphene has been employed as transparent
electrodes in organic solar cells (OSCs) because of its good physical
and optical properties. However, the electrical conductivity of graphene
films synthesized by chemical vapor deposition (CVD) is still inferior
to that of conventional indium tin oxide (ITO) electrodes of comparable
transparency, resulting in a lower performance of OSCs. Here, we report
an effective method to improve the performance and long-term stability
of graphene-based OSCs using electrostatically doped graphene films
via a ferroelectric polymer. The sheet resistance of electrostatically
doped few layer graphene films was reduced to ∼70 Ω/sq
at 87% optical transmittance. Such graphene-based OSCs exhibit an
efficiency of 2.07% with a superior stability when compared to chemically
doped graphene-based OSCs. Furthermore, OSCs constructed on ultrathin
ferroelectric film as a substrate of only a few micrometers show extremely
good mechanical flexibility and durability and can be rolled up into
a cylinder with 7 mm diameter