15 research outputs found
Frontal recession of Gangotri Glacier, Garhwal Himalayas, from 1965 to 2006, measured through high-resolution remote sensing data
We report in this communication the length fluctuation and frontal area changes at the snout of Gangotri Glacier based on high-resolution satellite data from 1965 to 2006. Glacial outlines were mapped from declassified imageries from Corona (1965, 1968), Hexagon (1980) and Indian satellites IRS PAN (2001) and Cartosat-1 (2006). The results show that Gangotri Glacier exhibited retreat up to 819 ± 14 m and lost 0.41 ± 0.03 sq. km (~ 0.01 sq. km year–1) at its front from 1965 to 2006. The retreat rates are lower than those previously reported using coarse-resolution remote sensing data and the Survey of India topography map. The results of the present study are supported by in-situ field survey conducted by the Geological Survey of India
Mapping of debris-covered glaciers in the Garhwal Himalayas using ASTER DEMs and thermal data
Mapping of debris-covered glaciers using remote-sensing techniques is recognized as one of the greatest challenges for generating glacier inventories and automated glacier change analysis. The use of visible (VIS) and near-infrared (NIR) bands does not provide sufficient continual information to detect debris-covered ice with remote-sensing data. This article presents a semi-automated mapping method for the debris-covered glaciers of the Garhwal Himalayas based on an Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) digital elevation model (DEM) and thermal data. Morphometric parameters such as slope, plan curvature and profile curvature were computed by means of the ASTER DEM and organized in similar surface groups using cluster analysis. A thermal mask was generated from a single band of an ASTER thermal image, while the clean-ice glaciers were identified using a band ratio based on ASTER bands 3 and 4. Vector maps were drawn up from the output of the cluster analysis, the thermal mask and the band ratio mask for the preparation of the final outlines of the debris-covered glaciers using geographic information system (GIS) overlay operations. The semi-automated mapped debris-covered glacier outline of Gangotri Glacier derived from 2006 ASTER data varied by about 5% from the manually outlined debris-covered glacier area of the Cartosat-1 high-resolution image from the same year. By contrast, outlines derived from the method developed using the 2001 ASTER DEM and Landsat thermal data varied by only 0.5% from manually digitized outlines based on Indian Remote Sensing Satellite (IRS)-1C panchromatic (PAN) data. We found that post-depositional sedimentation by debris flow/mass movement was a great hindrance in the fully automated mapping of debris-covered glaciers in the polygenetic environment of the Himalayas. In addition, the resolution of ASTER stereo data and thermal band data limits the automated mapping of small debris-covered glaciers with adjacent end moraine. However, the results obtained for Gangotri Glacier confirm the strong potential of the approach presented.</p
Microwave device jig characterization for ferromagnetic resonance induced spin Hall effect measurement in bilayer thin films
60-65Microwave device jig
for evaluating magnetic thin films consists of two symmetrical radial copper
pad sections each having panel mounted RF connector. A non resonant
measurement method for obtaining spin Hall voltage across magnetic thin films
using ferromagnetic resonance was developed, based on electrical impedance of
thin film and copper pads of the microwave device jig both in contact with each
other. A geometry is introduced, which provides good impedance match
characteristics and is optimised for maximum power transmission. It also gives
the flexibility in measurements for any orientation of thin film with respect
to applied magnetic field. In this geometry, a quantitative study of the
microwave device jig has been done by measuring spin Hall voltages in the
frequency range 0.1-10 GHz for bilayer thin films. The experimentally recorded
voltages can be fully ascribed to SHE detection due to microwave induced FMR
Source/Gate Material-Engineered Double Gate TFET for improved RF and linearity performance: a numerical simulation
Influence of fabrication processes on transport properties of superconducting niobium nitride nanowires
Fabrication of niobium nitride (NbN) superconducting nanowires based on focused ion beam (FIB) milling and electron beam lithography (EBL) is presented. The NbN films were deposited using reactive magnetron sputtering. Argon-to-nitrogen ratio turned out to be a crucial factor in synthesizing high quality superconducting NbN. Critical temperatures (T-c) of around 15.5 K were measured for films with a thickness of around 10 nm. Zero-field-cooled magnetization was measured to optimize the superconducting properties of ultra thin NbN films. The transport behaviour was studied using conventional resistance vs temperature and current-voltage characteristics down to 2 K. Effect of gallium contamination on superconducting properties has been discussed. Whereas the various processing steps of standard EBL route do not have any significant impact on the superconducting transition temperature as well as on the transition width of nanowires, there is significant degradation of superconducting properties of nanowires prepared using FIB. This has been attributed to gallium ion implantation across the superconducting channel. Although the effect of gallium implantation may have technological limitations in designing fascinating single photon detector architectures, it provides some interesting low-dimensional superconducting properties
Mapping of debris-covered glaciers in the Garhwal Himalayas using ASTER DEMs and thermal data
Mapping of debris-covered glaciers using remote-sensing techniques is recognized as one of the greatest challenges for generating glacier inventories and automated glacier change analysis. The use of visible (VIS) and near-infrared (NIR) bands does not provide sufficient continual information to detect debris-covered ice with remote-sensing data. This article presents a semi-automated mapping method for the debris-covered glaciers of the Garhwal Himalayas based on an Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) digital elevation model (DEM) and thermal data. Morphometric parameters such as slope, plan curvature and profile curvature were computed by means of the ASTER DEM and organized in similar surface groups using cluster analysis. A thermal mask was generated from a single band of an ASTER thermal image, while the clean-ice glaciers were identified using a band ratio based on ASTER bands 3 and 4. Vector maps were drawn up from the output of the cluster analysis, the thermal mask and the band ratio mask for the preparation of the final outlines of the debris-covered glaciers using geographic information system (GIS) overlay operations. The semi-automated mapped debris-covered glacier outline of Gangotri Glacier derived from 2006 ASTER data varied by about 5% from the manually outlined debris-covered glacier area of the Cartosat-1 high-resolution image from the same year. By contrast, outlines derived from the method developed using the 2001 ASTER DEM and Landsat thermal data varied by only 0.5% from manually digitized outlines based on Indian Remote Sensing Satellite (IRS)-1C panchromatic (PAN) data. We found that post-depositional sedimentation by debris flow/mass movement was a great hindrance in the fully automated mapping of debris-covered glaciers in the polygenetic environment of the Himalayas. In addition, the resolution of ASTER stereo data and thermal band data limits the automated mapping of small debris-covered glaciers with adjacent end moraine. However, the results obtained for Gangotri Glacier confirm the strong potential of the approach presented
Himalayan Glaciers (India, Bhutan, Nepal): Satellite Observations of Thinning and Retreat
This chapter summarizes the current state of remote sensing of glaciers in the India, Nepal, and Bhutan regions of the Himalaya, and focuses on new methods for assessing glacier change. Glaciers in these Himalaya regions exhibit complex patterns of changes due to the unique and variable climatic, topographic, and glaciological parameters present in this region. The theoretical understanding of glaciers in the Himalaya is limited by lack of sufficient observations due to terrain breadth and complexity, severe weather conditions, logistic difficulties, and geopolitics. Mapping and assessing these glaciers with satellite imagery is also challenging due to inherent sensor limitations and information extraction issues. Thus, we still lack a complete understanding of the magnitude of feedbacks, and in some places even their sign, between climate changes and glacier response in this region. In this chapter we present the current status of glaciers in various climatic regimes of the Himalaya, ranging from the monsoon-influenced regions of the central-eastern Himalaya (Nepal, Garhwal, Sikkim, and Bhutan) through the monsoon transition zone of Himachal Pradesh (India), to the dry areas of Ladakh (western Himalaya). The case studies presented here illustrate the use of remote sensing and elevation data coupled with glaciermapping techniques for glacier area and elevation change detection and ice flow modeling in the context of the Himalaya
Himalayan Glaciers (India, Bhutan, Nepal): Satellite Observations of Thinning and Retreat
This chapter summarizes the current state of remote sensing of glaciers in the India, Nepal, and Bhutan regions of the Himalaya, and focuses on new methods for assessing glacier change. Glaciers in these Himalaya regions exhibit complex patterns of changes due to the unique and variable climatic, topographic, and glaciological parameters present in this region. The theoretical understanding of glaciers in the Himalaya is limited by lack of sufficient observations due to terrain breadth and complexity, severe weather conditions, logistic difficulties, and geopolitics. Mapping and assessing these glaciers with satellite imagery is also challenging due to inherent sensor limitations and information extraction issues. Thus, we still lack a complete understanding of the magnitude of feedbacks, and in some places even their sign, between climate changes and glacier response in this region. In this chapter we present the current status of glaciers in various climatic regimes of the Himalaya, ranging from the monsoon-influenced regions of the central–eastern Himalaya (Nepal, Garhwal, Sikkim, and Bhutan) through the monsoon transition zone of Himachal Pradesh (India), to the dry areas of Ladakh (western Himalaya). The case studies presented here illustrate the use of remote sensing and elevation data coupled with glaciermapping techniques for glacier area and elevation change detection and ice flow modeling in the context of the Himalaya